소개
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lowrance Elite-5 HDI Combo unit. The Elite-5 HDI Combo is a versatile marine electronics device combining a chartplotter with a fishfinder, featuring a 5-inch color display and Hybrid Dual Imaging (HDI) sonar technology, which integrates Broadband Sounder and DownScan Imaging for detailed underwater views. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
설정 및 설치
Proper installation is crucial for the optimal performance of your Elite-5 HDI Combo unit. Ensure all connections are secure and waterproof.
1. 디스플레이 유닛 장착
Select a location on your vessel that provides clear visibility and easy access to controls, away from direct sunlight if possible. Use the included gimbal bracket and mounting hardware to secure the unit. Ensure there is adequate space behind the unit for cable connections and ventilation.
2. 전원 연결
Connect the red wire from the power cable to the positive (+) terminal of a 12V DC power source (e.g., boat battery) and the black wire to the negative (-) terminal. It is recommended to install an in-line 3-amp fuse on the positive wire, close to the battery, for protection.
3. 트랜스듀서 설치
The 50/200-455/800KHz HDI Skimmer transducer should be mounted in a location that provides an unobstructed view of the water beneath the hull. Common mounting options include transom mount, in-hull, or through-hull. Refer to the transducer-specific installation guide for detailed instructions. Ensure the transducer cable is routed away from sources of electrical interference.
4. 초기 전원 켜기
Once all connections are made, press and hold the LIGHT/POWER button to turn on the unit. The unit will perform a self-test and then display the main menu or last-used screen.
This image displays the Lowrance Elite-5 HDI Combo unit. The screen shows a split view: a chartplotter on the left with navigation data, and two sonar views on the right, indicating depth and underwater structures at 200kHz and 455kHz frequencies. The unit features a keypad with directional buttons, MENU, ENTER, PAGES, MOB, and LIGHT/POWER buttons.
작동 지침
Familiarize yourself with the unit's controls and display modes for effective use.
1. 기본 제어
- LIGHT/POWER Button: Press briefly to adjust backlight; press and hold to power on/off.
- 페이지 버튼: Cycles through available screen layouts (e.g., Chart, Sonar, Split-screen).
- 메뉴 버튼: Accesses the menu for the currently displayed page. Press twice to access the main system menu.
- 입력 버튼: Confirms selections in menus or marks waypoints.
- 방향 패드: Navigates through menus and moves the cursor on the chart or sonar screen.
- MOB Button (+/-): Marks a Man Overboard (MOB) waypoint. The '+' and '-' buttons also control zoom or range depending on the screen.
2. 디스플레이 모드
The Elite-5 HDI Combo offers various display configurations:
- 차트 플로터 View: Displays navigation charts, your vessel's position, waypoints, and routes.
- 소나 View (Broadband Sounder): Shows traditional sonar returns, ideal for identifying fish arches and bottom composition. Operates at 200kHz or 50kHz (if applicable).
- 다운스캔 이미징 View: Provides photo-like images of structure and fish directly beneath your boat, operating at 455kHz or 800kHz.
- 분할 화면 Views: Combine two or more views, such as Chart/Sonar, Sonar/DownScan, or Chart/Sonar/DownScan, for comprehensive information.
3. 디스플레이 해석
The screen provides real-time data:
- Depth (DPH): 현재 수심.
- Water Temperature (TWTR): Temperature of the water.
- Speed Over Ground (SOG): Your vessel's speed relative to the ground.
- Sonar Returns: Fish appear as arches or distinct shapes. Structure appears as defined contours.
4. 설정 조정
사용하세요 메뉴 button to access settings for the current screen. Common adjustments include:
- 감광도: Adjusts how much detail the sonar displays. Increase for clearer returns in deep water, decrease to reduce clutter in shallow water.
- 범위: Sets the maximum depth displayed on the sonar screen.
- 빈도: Switch between 200kHz (for deeper water and wider coverage) and 455kHz (for higher detail in shallower water) on HDI models.
- 색상 팔레트: 소나 디스플레이의 색상 구성을 변경합니다.
유지
Regular maintenance ensures the longevity and performance of your Elite-5 HDI Combo.
1. Cleaning the Display Unit
Wipe the screen and unit casing는 부드러운 d로 발음합니다.amp 천으로 닦아주세요. 잘 지워지지 않는 얼룩에는 순한 비누 용액을 사용하세요. Do not use abrasive cleaners, solvents, or ammonia-based products, as these can damage the display and casing.
2. Transducer Care
Periodically inspect the transducer for marine growth or damage. Clean the transducer face with a soft cloth and fresh water. Remove any barnacles or algae carefully to avoid scratching the surface, which can impair performance.
3. 보관
When not in use for extended periods, especially in harsh conditions, it is recommended to remove the display unit from its bracket and store it in a dry, temperature-controlled environment. Disconnect power to prevent battery drain.
문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
전원이 없습니다
- Check all power cable connections for looseness or corrosion.
- Verify the fuse in the power line is intact and not blown.
- 배터리가 충분히 충전되었는지 확인하십시오.
No Depth Reading or Poor Sonar Image
- Check the transducer cable connection to the unit.
- 변환기 표면에 해양 생물이 붙어 있거나 손상되었는지 검사하십시오. 필요한 경우 청소하십시오.
- Ensure the transducer is properly submerged and not experiencing aeration (air bubbles passing over its face).
- Adjust sonar sensitivity and range settings.
- Verify the correct transducer type is selected in the system settings.
GPS Not Acquiring Position
- 장치가 깨끗한지 확인하십시오. view of the sky, unobstructed by overhead structures.
- Allow sufficient time for the GPS receiver to acquire satellites (can take several minutes on first use or after long periods of inactivity).
If problems persist after following these steps, contact Lowrance customer support.
명세서
| 특징 | 사양 |
|---|---|
| 상표 | 로렌스 |
| 모델명 | 000-11146-001 |
| 화면 크기 | 5 인치 |
| 디스플레이 유형 | LCD, 컬러 화면 |
| 화면 해상도 | 480 x 480 픽셀 |
| 전원 | 배터리 구동(12V DC) |
| 품목 무게 | 1.59kg(3.5파운드) |
| 제품 크기(LxWxH) | 25.4 x 20.32 x 20.32cm |
| 사용 가능한 메모리 슬롯 | 2 |
| Transducer Frequencies | 50/200kHz (Broadband), 455/800kHz (DownScan) |
보증 및 지원
Your Lowrance Elite-5 HDI Combo unit is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details. Keep your proof of purchase for warranty claims.
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Lowrance customer support. Contact information can typically be found on the Lowrance official web사이트 또는 제품 포장.
