소개
This instruction manual provides essential information for the safe and effective use of your Hot Wheels Track Builder 2-Speed Power Booster Accessory. This accessory is designed to integrate with existing Hot Wheels Track Builder sets, providing motorized speed to enhance your track creations. Please read all instructions carefully before assembly and operation.
안전 정보
- 경고: Small parts may be generated. Not suitable for children under 3 years due to choking hazard. Recommended for ages 4 and older.
- Always supervise children during play with this product.
- 오래된 배터리와 새 배터리를 섞지 마십시오. 알칼리성, 표준(탄소-아연), 충전식(니켈-카드뮴) 배터리를 섞지 마십시오.
- Insert batteries with correct polarity. Exhausted batteries should be removed from the toy.
- 전원단자를 단락시키지 마십시오.
- Keep hair, loose clothing, and fingers away from moving parts (booster wheels) during operation.
패키지 내용
- Hot Wheels Track Builder 2-Speed Power Booster Accessory (Model BGX84)
- 사용 설명서
설정
1. 배터리 설치
The Power Booster requires 2 'D' size batteries (not included). To install batteries:
- 부스터 장치 아래쪽에 있는 배터리함을 찾으십시오.
- 십자 드라이버(포함되지 않음)를 사용하여 배터리 칸 덮개를 풉니다.
- Insert 2 'D' batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- 배터리실 커버를 교체하고 나사로 고정합니다.
2. Connecting to Track
The Power Booster is designed to seamlessly integrate with your existing Hot Wheels orange track pieces.
- Align the connection tabs on the booster unit with the slots on your Hot Wheels track pieces.
- Slide the track pieces firmly into place until they click, ensuring a secure connection.
- Ensure the track is laid out on a flat, stable surface to prevent disconnections during play.
작동 지침
1. Powering On and Speed Selection
The Power Booster features a switch to turn the unit on and select between two speed settings.
- Locate the power/speed switch on the side of the booster unit.
- Slide the switch to the desired speed setting: 속도 1 for moderate boost or 속도 2 for maximum velocity.
- The booster wheels will begin to spin once a speed is selected.
2. Car Placement
For optimal performance, ensure cars are placed correctly into the booster's entry point.
- Place a Hot Wheels car onto the track leading into the booster.
- Gently push the car forward until its wheels engage with the spinning booster mechanism.
- The booster will propel the car forward along the track.
3. 데모 영상
유지
- 청소: Wipe the booster unit with a dry or slightly damp 천. 물에 담그지 마십시오.
- 배터리 교체: Replace batteries when the booster's performance diminishes or stops. Follow the battery installation steps.
- 저장: When not in use, store the booster and track pieces in a clean, dry place away from direct sunlight. Remove batteries if storing for extended periods.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Booster not working or wheels not spinning. | 배터리가 소진되었거나 올바르게 설치되지 않았습니다. | Check battery polarity and replace with fresh 'D' batteries. |
| Cars are not boosting effectively or getting stuck. | Incorrect speed setting, car type incompatibility, or track misalignment. | Ensure the speed switch is set to a higher speed (Speed 2). Use standard Hot Wheels cars; some wider or heavier cars may not fit or perform optimally. Check track connections for secure fit. |
| Booster is excessively loud. | Normal operation sound for motorized components. | Some noise is expected due to the motorized booster mechanism. Ensure no foreign objects are obstructing the wheels. |
명세서
- 모델 번호: BGX84
- 제품 크기: 12 x 2.25 x 7.5 인치
- 품목 무게: 12 온스
- 제조업체: 마텔
- 추천 연령: 36개월 ~ 10세
- 필요한 배터리: 'D'형 배터리 2개 (별도 구매)
보증 및 지원
제품 보증에 관한 정보는 구매 시 동봉된 보증 카드를 참조하시거나 핫휠 공식 웹사이트를 방문하십시오. website. For further assistance or support, please contact Mattel customer service through their official channels.
온라인 지원: service.mattel.com
