1. 제품 오버view
The Bixolon SRP-350II is a monochrome desktop direct thermal receipt printer designed for efficient and reliable point-of-sale (POS) operations. It utilizes direct thermal printing technology, eliminating the need for ink cartridges, resulting in quieter operation, faster print speeds, and reduced energy consumption compared to traditional dot-matrix printers. This printer is suitable for printing receipts, barcode labels, and other media up to 3 inches wide.
An image showing the Bixolon SRP-350II monochrome desktop direct thermal receipt printer, its power adapter, and power cables. The printer is black with a power switch on the side and indicator lights on the top panel. The power adapter and cables are also black.
2. 설정 가이드
2.1 포장 해제 및 내용물 확인
모든 구성품을 포장에서 조심스럽게 꺼내세요. 다음 품목이 모두 있는지 확인하세요.
- Bixolon SRP-350II Receipt Printer
- 전원 어댑터
- 전원 코드
- Receipt Paper Roll (starter roll)
2.2 전원 연결
- Ensure the printer's power switch is in the OFF (O) position.
- 전원 코드를 전원 어댑터에 연결합니다.
- Plug the power adapter's output connector into the power input port on the back of the printer.
- 전원 코드를 표준 전기 콘센트에 꽂으세요.
2.3 Connecting the Data Cable (Serial)
The SRP-350II features a serial interface for connectivity.
- Locate the serial port on the back of the printer.
- Connect a compatible serial cable (sold separately) from your host device (e.g., computer, POS system) to the printer's serial port.
- Secure the cable connections if necessary.
2.4 Loading Receipt Paper
- Open the paper roll cover by lifting the latch or pressing the release button.
- Insert the new paper roll into the paper compartment, ensuring the paper feeds from the bottom of the roll.
- 커터 너머로 소량의 종이를 빼냅니다.
- Close the paper roll cover firmly until it clicks into place.
3. 사용 설명서
3.1 전원 켜기/끄기
- To power on: Flip the power switch on the side of the printer to the ON (I) position. The Power indicator light should illuminate.
- To power off: Flip the power switch to the OFF (O) position.
3.2개의 표시등
The printer features several indicator lights on its top panel:
- 힘: 프린터 전원이 켜져 있음을 나타냅니다.
- 오류: Illuminates or flashes to indicate a printer error (e.g., paper out, cover open, print head overheating). Refer to the Troubleshooting section for details.
- 종이: Illuminates when the paper roll is low or out.
3.3 피드 버튼
The Feed button is located on the top panel. Pressing this button will advance the paper by one line. Holding it down will continuously feed paper.
3.4 인쇄
Once the printer is powered on and connected to your host device, it will receive print commands from your POS software or application. Ensure your software is configured to use the correct printer model and serial port settings.
4. 유지관리
Regular maintenance helps ensure optimal performance and extends the life of your printer.
4.1 프린트 헤드 청소
The print head should be cleaned periodically, especially if print quality degrades or after changing many paper rolls.
- 프린터 전원을 끄고 전원 코드를 뽑으세요.
- 용지 롤 커버를 엽니다.
- Using a cotton swab lightly moistened with isopropyl alcohol, gently wipe the thermal elements of the print head. Avoid touching the print head with bare hands.
- 프린트 헤드가 완전히 마를 때까지 기다린 후 덮개를 닫고 전원을 다시 연결하십시오.
4.2 플래튼 롤러 청소
The platen roller helps feed the paper smoothly. Clean it if paper jams occur frequently or if paper feeding becomes inconsistent.
- 프린터 전원을 끄고 전원 코드를 뽑으세요.
- 용지 롤 커버를 엽니다.
- Using a cotton swab lightly moistened with isopropyl alcohol, gently clean the surface of the rubber platen roller.
- Rotate the roller manually to clean the entire surface.
- 덮개를 닫고 전원을 다시 연결하기 전에 완전히 건조시키십시오.
4.3 일반 청소
프린터 외부를 부드러운 천으로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
5. 문제 해결
This section provides solutions to common issues you may encounter with your SRP-350II printer.
5.1 전원 없음
- Ensure the power cord is securely connected to the printer, power adapter, and electrical outlet.
- Verify the power switch is in the ON (I) position.
- 다른 장치로 전기 콘센트를 테스트하여 제대로 작동하는지 확인하세요.
5.2 No Print Output
- Check if the printer is powered on and the Power indicator light is illuminated.
- Ensure the serial data cable is securely connected to both the printer and the host device.
- Verify that the paper roll is loaded correctly and there is sufficient paper. The Paper indicator should not be lit.
- Confirm that your POS software or application is sending print commands to the correct printer and port.
- Check for any error lights.
5.3 용지 걸림
- 프린터를 끕니다.
- 용지 롤 커버를 엽니다.
- Carefully remove any jammed paper. Avoid tearing the paper inside the mechanism.
- Ensure the paper path is clear before reloading the paper roll and closing the cover.
5.4 인쇄 품질이 좋지 않음
- The paper roll may be old or of poor quality. Replace it with a new, high-quality thermal paper roll.
- 유지관리 섹션에 설명된 대로 프린트 헤드를 청소하세요.
- Ensure the paper roll is inserted correctly, with the thermal side facing the print head.
6. 사양
| 특징 | 사양 |
|---|---|
| 모델명 | SRP-350II |
| 인쇄 방법 | 직접 열 |
| 인쇄 속도 | Up to 7.87 inches per second (200 mm/s) |
| 인쇄 해상도 | 180dpi(인치당 도트 수) |
| 인쇄 폭 | Up to 3 inches (72 mm for 80 mm paper) |
| 미디어 유형 | 열전사 영수증 용지 |
| 미디어 폭 | 80mm (XNUMXmm) |
| 미디어 롤 직경 | 최대 83mm |
| 연결성 | 직렬 인터페이스 |
| 메모리 | 64 Mbit SDRAM, 16 Mbit Flash |
| 치수(높이 x 너비 x 깊이) | 146 x 145 x 203mm(5.74 x 5.70 x 7.99인치) |
| 무게 | 1.65kg(3.63파운드) |
| 전원 공급 장치 | 24VDC |
| 색상 | 검은색 |
7. 보증 및 지원
For information regarding the product warranty, please refer to the documentation provided at the time of purchase or contact Bixolon customer support directly. Bixolon manufactures point-of-sale (POS) printers and related accessories.
For technical assistance or further inquiries, please visit the official Bixolon web사이트를 방문하거나 공인 서비스 센터에 문의하세요.
