펜더 2273000000

펜더 '68 커스텀 트윈 리버브 Amp리파이어 사용 설명서

Model: 2273000000 (68 Custom Twin Reverb)

1. 소개 및 이상view

The Fender '68 Custom Twin Reverb Amplifier pays tribute to the classic look, sound, and performance of Fender's late '60s "silver face" amplifiers. Originally a transitional year for Fender amps, 1968 brought a fresh aesthetic with a silver and turquoise front panel and aluminum "drip edge" grille cloth trim, while maintaining the pure Fender tone. This amplifier is renowned for its clear, deep, and powerful sound, delivering big tube tone with world-class Fender reverb and vibrato effects.

The '68 Custom Twin Reverb features both channels with reverb and tremolo. The "custom" channel incorporates a modified Bassman tone stack, offering modern players enhanced tonal flexibility, especially when using pedals. It also provides quicker gain onset and reduced negative feedback for greater touch sensitivity. Equipped with dual 12-inch Celestion G12V-70 speakers, this amplifier delivers a distinctively rock 'n' roll flavor.

2. 주요 특징

3. 설정

3.1 포장 풀기 및 배치

조심스럽게 amp앰프를 포장에서 꺼내세요. amplifier on a stable, level surface. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing the amp열원 근처나 직사광선 아래에 발전기를 두지 마십시오.

3.2 전원 연결

  1. 확인하십시오 amplifier's power switch is in the "OFF" position.
  2. 제공된 전원 코드를 제품 후면 패널의 AC 입력 단자에 연결하십시오. amp리퍼.
  3. 전원 코드의 다른 쪽 끝을 접지된 AC 전원 콘센트에 꽂습니다.

3.3 계측기 연결

Connect your guitar or other instrument to one of the input jacks on the front panel using a high-quality instrument cable. The amplifier features two input jacks per channel (Custom and Vintage), typically labeled "1" (high gain) and "2" (low gain). Experiment to find the input that best suits your instrument's output level and desired tone.

3.4 풋스위치 연결

Connect the included 2-button footswitch to the "FOOTSWITCH" jack on the rear panel to enable remote control of the reverb and tremolo effects.

4. 사용 설명서

4.1 전원 켜기/끄기

  1. 전원을 켜려면:
    • Ensure all volume controls are set to zero.
    • Flip the "POWER" switch to the "ON" position.
    • 튜브가 따뜻해질 때까지 약 30~60초 정도 기다리세요.
    • Flip the "STANDBY" switch to the "ON" position.
    • Slowly raise the volume to your desired level.
  2. 전원을 끄려면:
    • Lower all volume controls to zero.
    • Flip the "STANDBY" switch to the "OFF" position.
    • Wait a few seconds, then flip the "POWER" switch to the "OFF" position.

4.2 전면 패널 컨트롤

The '68 Custom Twin Reverb features two distinct channels: a 'Custom' channel with a modified Bassman tone stack and a 'Vintage' channel for classic Fender tones. Both channels include Reverb and Tremolo.

4.3 Tone Shaping Tips

4.4 제품 데모 영상

Fender 68 Custom Vibro Champ Reverb Review

이 영상은 자세한 내용을 제공합니다.view of the Fender 68 Custom Vibro Champ Reverb, showcasing its features and sound capabilities. It offers insights into the amplifier's performance and suitability for various musical styles.

I've had this for over 20 YEARS - How has it held up!?

This video features a long-term review of a Fender amplifier, discussing its durability and performance over two decades. It highlights the enduring quality and sound of Fender's classic designs.

5. 유지관리

5.1 일반 관리 및 청소

5.2 튜브 교체

Vacuum tubes have a finite lifespan and will eventually need replacement. If you notice a decrease in performance, unusual noise, or a change in tone, it may be time to replace the tubes. It is recommended to have tube replacement and biasing performed by a qualified technician to ensure proper operation and safety.

5.3 퓨즈 교체

만약 amplifier fails to power on, check the main fuse located on the rear panel. Always replace a blown fuse with one of the exact same type and rating to prevent damage to the amplifier and ensure safety. Consult the specifications section for the correct fuse type.

6. 문제 해결

7. 사양

펜더 '68 커스텀 트윈 리버브 Amp리파이어 프론트 view

앞쪽 view of the Fender '68 Custom Twin Reverb Amp리파이어, 쇼크asing its silver and turquoise front panel, aluminum "drip edge" grille cloth trim, and control knobs.

펜더 '68 커스텀 트윈 리버브 Amp치수가 있는 증폭기

옆 view of the Fender '68 Custom Twin Reverb Amplifier, illustrating its physical dimensions: 10.38 inches depth, 19.88 inches height, and 26.16 inches width.

펜더 '68 커스텀 트윈 리버브 Amp정수기 사양
특징세부 사항
모델 번호2273000000
제품 치수10.38 x 19.88 x 26.16 인치
품목 무게64파운드
출력 와트tage80 와트
스피커 유형Dual 12" Celestion G12V-70
색상검은색
호환 장치기타
재료Wood/Tolex
제조업체펜더 Amp리퍼
첫 번째 이용 가능 날짜8년 2013월 XNUMX일

8. 보증 및 지원

For warranty information, product registration, and technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for any warranty claims.

펜더 공식 Web대지: www.fender.com

관련 문서 - 2273000000

사전view Fender Tone Master Pro 모델 가이드: Amp리파이어, 효과 및 캐비닛
Fender Tone Master Pro 모델 가이드를 탐색해 보세요. 여기에는 다음이 자세히 설명되어 있습니다. amp리파이어 모델, 캐비닛 임펄스 응답, 이펙트, 마이크. 뮤지션을 위한 상징적인 음색과 고급 기능을 만나보세요.
사전view 펜더 채널amp이온 II 기타 Amplifier 사용 설명서
Fender Ch에 대한 종합적인 사용자 설명서amp이온 II 25 및 Champ이온 II 50 기타 amp앰프에 대한 자세한 설명과 제어 방식, 기능, 효과 및 사양.
사전view Fender 일렉트릭 기타 사용 설명서: 설정, 유지 관리 및 내역
펜더 일렉트릭 기타의 종합적인 사용 설명서로, 설치, 유지 관리, 구조, 역사, 안전 지침 등을 다룹니다. 스트라토캐스터, 텔레캐스터 및 기타 모델의 조정 방법을 알아보세요.
사전view 펜더 프로-리버브 Amp 서비스 매뉴얼
Fender Pro-Reverb에 대한 포괄적인 서비스 매뉴얼 Amp (모델 021-5500-000) 기술자를 위한 자세한 사양, 부품 목록, 회로도 및 조립 지침을 제공합니다.
사전view 펜더 '64 커스텀 디럭스 리버브 Amp 사용 설명서
이 설명서는 Fender '64 Custom Deluxe Reverb에 대한 자세한 정보를 제공합니다. Amp제어판 설명, 후면 패널 연결, 사양 및 기능 등을 포함하여 이 상징적인 기타의 작동, 유지 관리 및 문제 해결에 대한 내용을 다룹니다. amp리퍼.
사전view Fender 일렉트릭 기타 사용 설명서
펜더 일렉트릭 기타의 역사, 대표 모델, 셋업 절차, 유지 관리 팁 및 관리 방법을 모두 다룬 종합 가이드입니다. 기타의 구조를 이해하고 최적의 연주 상태로 유지하는 방법을 알아보세요.