Estes 2483

에스테스 로고

Estes 2483 Phantom Blue Model Rocket Kit Instruction Manual

For Ages 10+ (Adult Supervision Recommended for Ages Under 12)

1. 서론

This instruction manual provides detailed guidance for the assembly, preparation, and safe launch of your Estes 2483 Phantom Blue Model Rocket Kit. Designed for beginner rocketeers, this kit offers an engaging experience in model rocket construction and flight. Please read all instructions carefully before beginning assembly or attempting a launch.

2. What's Included in Your Kit

Your Estes 2483 Phantom Blue Model Rocket Kit includes the following components:

Estes Phantom Blue rocket kit components including nose cone, body tube, fins, and parachute.
Figure 2.1: Included components of the Phantom Blue kit.

3. Additional Items Required (Sold Separately)

To build and launch your Phantom Blue rocket, you will need the following items, which are not included in this kit:

For Assembly:

For Launch:

Image showing tools needed for building and launching the rocket, including scissors, sandpaper, tape, cement, engines, wadding, launch pad, and controller.
Figure 3.1: Essential tools and materials for building and launching.

4. 조립 설명서

The Estes 2483 Phantom Blue rocket is designed for easy assembly, typically taking approximately 1 hour. Follow the step-by-step instructions provided in your kit packaging. Key steps include:

  1. Prepare Body Tube: Ensure the body tube is smooth and free of debris.
  2. 핀 부착: Securely attach the precolored plastic fins to the body tube using plastic cement. Ensure proper alignment for stable flight.
  3. Assemble Nose Cone and Recovery System: Attach the recovery parachute to the nose cone and shock cord. Connect the shock cord to the inside of the body tube.
  4. 데칼 적용: Once the rocket is fully assembled and dry, apply the provided decals according to the design.
Hands assembling the fins onto the rocket body tube.
Figure 4.1: Assembly of the rocket fins.

5. Pre-Launch Preparation

Proper preparation is crucial for a successful and safe launch. Always perform a pre-launch check.

5.1 Engine Selection

Estes model rocket engines are assigned a letter indicating their power level. 'A' engines are the lowest power and are generally recommended for beginner rockets. The Phantom Blue is compatible with A8-3, B4-4, B6-4, C6-5, and C6-7 engines. Refer to the specific engine instructions for proper installation.

5.2 Recovery Wadding

Recovery wadding is inserted into the body tube above the engine to protect the parachute from the hot ejection charge. Always use fresh recovery wadding for each flight.

5.3 Launch System Setup

Set up your Estes Porta Pad II Launch Pad and Electron Beam Launch Controller according to their respective instructions. Ensure the launch pad is stable and the launch rod is securely in place. The launch controller requires 4 AA batteries.

Estes Porta-Pad II Launch Pad
Figure 5.1: Estes Porta-Pad II Launch Pad.
Estes Electron Beam Launch Controller
Figure 5.2: Estes Electron Beam Launch Controller.

Video 5.1: Introduction to Modern Rocketry by Estes Bot. This video provides an overview of rocket components, engine selection, and the purpose of recovery wadding and launch systems.

6. Launching Your Rocket

Once your rocket is prepared and the launch system is set up in an appropriate launch area, you are ready to launch.

  1. Place Rocket: Carefully place your rocket onto the launch rod.
  2. Connect Starter: Connect the clips from the launch controller's lead cable to the wires on the engine starter.
  3. 클리어 영역: Ensure all spectators are at least 15 feet away from the launch pad.
  4. Insert Safety Key: 안전 키를 발사 컨트롤러에 삽입하세요.
  5. 카운트 다운 : Initiate a clear countdown (e.g., "5, 4, 3, 2, 1, LAUNCH!").
  6. 버튼을 누르시오: Press and hold the launch button until the rocket ignites and lifts off.
Diagram illustrating the flight sequence of a model rocket, from launch to recovery.
Figure 6.1: Model rocket flight sequence.
Estes Phantom Blue rocket launching with a trail of smoke.
Figure 6.2: Phantom Blue rocket during launch.

7. 복구

After reaching its peak altitude, the engine's ejection charge will deploy the parachute, allowing the rocket to descend safely for recovery and reuse. Observe the rocket's descent and retrieve it carefully.

Estes Phantom Blue rocket descending with its parachute deployed.
Figure 7.1: Phantom Blue rocket under parachute recovery.

8. 안전 지침

Always adhere to the National Association of Rocketry (NAR) Model Rocket Safety Code for safe operation. Key safety points include:

Diagram showing recommended launch site dimensions based on engine impulse.
Figure 8.1: Recommended launch site dimensions.

9. 사양

특징세부 사항
모델 번호2483
제품 이름팬텀 블루
길이19.4인치(49.3cm)
지름0.98인치(25mm)
무게1.4 온스(39.7g)
Projected Max Altitude1,150 feet (351 m) with C6-7 engine
Recommended EnginesA8-3, B4-4, B6-4, C6-5, C6-7
Launch SystemEstes Porta Pad II
복구 시스템12 inch (30.5 cm) Parachute
핀 소재성형 플라스틱
조립 시간약 1시간

10. 보증 및 지원

Estes products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Estes web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.

관련 문서 - 2483

사전view 에스테스 퀵스 모델 로켓 설명서
에스테스 퀵스(Estes Quix) 모형 로켓의 단계별 조립 및 발사 설명서입니다. 부품 목록, 조립도, ​​안전 주의사항이 포함되어 있습니다.
사전view Estes Porta-Pad II 모델 로켓 발사대 및 전자빔 컨트롤러 사용 설명서
안전 지침과 문제 해결을 포함하여 Estes Porta-Pad II 모델 로켓 발사대와 전자빔 발사 컨트롤러를 조립하고 사용하는 방법에 대한 포괄적인 지침입니다.
사전view 에스테스 스타 호퍼 모델 로켓 설명서
에스테스 스타 호퍼 모형 로켓의 자세한 조립, 준비 및 발사 설명서입니다. 부품 목록, 안전 경고, 초보자를 위한 비행 팁이 포함되어 있습니다.
사전view 에스테스 알파 모델 로켓 설명서 - 조립 및 발사 가이드
에스테스 알파(Estes Alpha) 모델 로켓(모델 1225, 1756, 1753)의 조립 및 발사에 대한 종합적인 설명서입니다. 부품 목록, 단계별 조립 가이드, 마무리 팁, 회수 시스템 준비, 엔진 설정, 발사 절차 및 안전 예방 조치가 포함되어 있습니다.
사전view 에스테스 미니 버사 모델 로켓 조립 설명서 및 조립 가이드
에스테스 미니 버사 모형 로켓 조립 및 발사에 대한 포괄적인 설명서입니다. 부품 목록, 단계별 조립 방법, 발사 절차 및 안전 예방 조치가 포함되어 있습니다.
사전view Estes Green Eggs Model Rocket Kit 1718 Assembly and Launch Instructions
Comprehensive guide for assembling and launching the Estes Green Eggs model rocket kit (Model 1718). Includes detailed parts list, step-by-step assembly instructions, finishing tips, launch procedures, and safety precautions.