HP 481653-002 146GB SAS Hard Disk Drive User Manual

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of your HP 481653-002 146GB 15000RPM 3.5-inch SAS Hard Disk Drive. Please read these instructions carefully before proceeding with installation or use to ensure optimal performance and longevity of the product.

The HP 481653-002 is a high-performance Serial Attached SCSI (SAS) hard drive designed for enterprise environments, offering reliable data storage and fast access speeds.

2. 안전 정보

Observe the following safety precautions to prevent injury and damage to the drive or system:

• 정전기 방전(ESD) 보호: Always wear an anti-static wrist strap and work on an anti-static mat when handling the hard drive. ESD can severely damage electronic components.
• 전원 끄기 : Ensure the system is completely powered off and disconnected from the power source before installing or removing the hard drive.
• 조심스럽게 다루십시오: Hard drives are delicate. Avoid dropping, jarring, or exposing the drive to excessive vibration. Hold the drive by its edges, not by the circuit board or connector pins.
• 통풍: Ensure adequate airflow around the drive to prevent overheating during operation.
• 적격 직원: Installation and maintenance should ideally be performed by qualified technical personnel.

3. 패키지 내용

패키지에 모든 구성품이 들어 있는지 확인하십시오. 누락되거나 손상된 구성품이 있는 경우 즉시 판매처에 연락하십시오.

• HP 481653-002 146GB 15000RPM 3.5-inch SAS Hard Disk Drive with Tray
• Documentation (this manual, if printed)

Note: SAS cables and mounting screws are typically supplied with the server or storage enclosure and are not included with the drive itself.

4. 설정 및 설치

Follow these steps to properly install the HP 481653-002 hard drive into your compatible server or storage system.

4.1 설치 전 확인 사항

• Ensure your server or storage system supports 3.5-inch SAS hard drives.
• Verify that your system's firmware and operating system are up to date to ensure compatibility.
• Gather necessary tools, such as a Phillips head screwdriver (if required for the drive tray).

4.2 물리적 설치

1. 전력 다운: Shut down the server or storage system completely and disconnect all power cables.
2. 드라이브 베이 접근: Open the server or storage enclosure to access the available 3.5-inch drive bays. Refer to your system's manual for specific instructions on accessing drive bays.
3. 드라이브 삽입: Carefully slide the HP 481653-002 hard drive, with its attached tray, into an empty drive bay until it clicks securely into place. Ensure the SAS connector on the drive properly mates with the backplane connector in the bay.
4. 보안 드라이브: If your system requires additional securing mechanisms (e.g., screws or latches), engage them to hold the drive firmly.
5. 닫힌 첨부: Close the server or storage enclosure.
6. 전원 다시 연결: Reconnect all power cables and power on the system.

Figure 1: HP 481653-002 146GB SAS Hard Disk Drive with its hot-pluggable tray. This image shows the front view of the drive, indicating its form factor and the integrated tray for easy installation into compatible server bays.

4.3 System Recognition and Configuration

After physical installation, the system's operating system or RAID controller will need to recognize and configure the new drive.

• BIOS/UEFI/RAID Controller: Access your system's BIOS/UEFI or RAID controller configuration utility during boot-up to verify that the drive is detected.
• 운영 체제: Once detected, you may need to initialize, partition, and format the drive within your operating system's disk management tools before it can be used for data storage. Refer to your operating system's documentation for detailed instructions.

5. 하드 드라이브 작동

The HP 481653-002 operates as a standard storage device within your server or storage array. Once installed and configured, it functions continuously to store and retrieve data as requested by the operating system and applications.

• 데이터 접근: Data is written to and read from the drive via the SAS interface, managed by the system's controller.
• 핫플러깅 가능: This drive is designed to be hot-pluggable, meaning it can be inserted or removed from a running system without powering down, provided the system's backplane and RAID controller support hot-swapping. Always consult your server's documentation for proper hot-swap procedures to avoid data loss or system instability.
• 성능: The 15000RPM rotational speed provides high performance suitable for demanding applications and environments.

6. 유지관리

적절한 유지관리는 하드 드라이브의 수명과 안정성을 보장합니다.

• 데이터 백업: Regularly back up critical data stored on the drive. While reliable, all hard drives can eventually fail.
• 펌웨어 업데이트: 휴렛팩커드 지원 서비스를 주기적으로 확인하세요. website for firmware updates for your drive model. Firmware updates can improve performance, stability, and compatibility.
• 시스템 모니터링: Utilize server management software to monitor the health and temperature of your hard drives. Early detection of issues can prevent data loss.
• 청결: Ensure the server environment is clean and free of dust, which can impede airflow and lead to overheating.

7. 문제 해결

If you encounter issues with your HP 481653-002 hard drive, consider the following troubleshooting steps:

• 드라이브가 감지되지 않음:
  • 드라이브가 베이에 완전히 장착되었는지 확인하십시오.
  • Check SAS cable connections (if applicable, for external enclosures).
  • Ensure the RAID controller or HBA is properly installed and its drivers are up to date.
  • Test the drive in a different bay or with a different controller, if available.
• 성능 문제:
  • 시스템 리소스 사용률(CPU, RAM)을 확인하십시오.
  • Ensure the drive is not overheating.
  • Verify RAID array health (if part of a RAID configuration).
  • Run diagnostic tools provided by your operating system or HP.
• 특이한 소음:

  딸깍거리는 소리, 긁히는 소리 또는 큰 윙윙거리는 소리가 들리면 드라이브 고장의 징후일 수 있습니다. 중요한 데이터는 즉시 백업하고 드라이브 교체를 고려하십시오.

If troubleshooting steps do not resolve the issue, contact HP support or your system vendor for further assistance.

8. 사양

9. 보증 및 지원

This HP hard disk drive is covered by a limited warranty. For specific warranty terms and conditions, please refer to the documentation provided with your original system purchase or visit the official Hewlett-Packard support web대지.

For technical support, driver downloads, firmware updates, and additional resources, please visit the Hewlett-Packard support portal. When contacting support, have your product model number (481653-002) and any relevant system information ready.

HP 지원 Web대지: www.hp.com/support