1. 서론
This manual provides essential information for the safe and effective installation, operation, and maintenance of your EXCALIBUR X1 Complete Car Audio System. This system includes a 12-inch bass reflex boombox, a 2-channel MOSFET amplifier, and a comprehensive cable set. Please read this manual thoroughly before attempting installation or operation.
2. 안전 정보
설치 및 작동 시에는 항상 안전을 최우선으로 하십시오. 이 지침을 따르지 않을 경우 부상, 제품 손상 또는 차량 손상으로 이어질 수 있습니다.
- 전문 설치 권장: If you are unsure about any part of the installation process, seek assistance from a qualified car audio technician.
- 배터리 분리: 단락 및 감전을 방지하기 위해 전기 작업을 시작하기 전에 항상 차량 배터리의 음극 단자를 분리하십시오.
- 적절한 배선: Ensure all wiring is correctly routed and secured to prevent pinching, chafing, or interference with vehicle components. Use appropriate gauge wires as specified.
- 퓨즈 보호: Install the provided fuse holder and fuse as close to the battery as possible on the main power cable to protect against overcurrent.
- 통풍: 확인하십시오 amplifier is installed in a location with adequate ventilation to prevent overheating. Do not cover the amp증폭기의 방열판.
- 청력 보호: Prolonged exposure to high volume levels can cause permanent hearing damage. Operate the system at safe listening levels.
- 안전한 장착: Securely mount all components to prevent them from becoming projectiles during sudden stops or collisions.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.
- 1x EXCALIBUR X12.1BR 12-inch Bass Reflex Boombox (Subwoofer)
- 1x EXCALIBUR X600.2 2-Channel MOSFET Amp리퍼
- 1x EXCALIBUR X8GA Complete Cable Set, including:
- 5m Blue Power Cable
- 1m Silver Power Cable (Ground)
- 5.2m RCA Cable
- 5.2m Remote Turn-On Cable
- 1x AGU Fuse Holder
- 1x 60Amp AGU 퓨즈
- 4x Cable Terminals
Image 3.1: All components of the EXCALIBUR X1 Complete Car Audio System, including the subwoofer, amplifier, and cable kit.
이미지 3.2: 앞면 view of the EXCALIBUR X1 product packaging.
4. 설정 및 설치
This section outlines the general steps for installing your EXCALIBUR X1 Car Audio System. Specific vehicle requirements may vary.
4.1. Amplifier Installation (EXCALIBUR X600.2)
그만큼 amplifier is the central component for powering your subwoofer. Choose a mounting location that is dry, well-ventilated, and secure, such as under a seat or in the trunk.
- 설치: 단단히 고정 amplifier to a solid surface using appropriate screws or bolts. Ensure there is sufficient space around the amp공기 흐름을 위한 리파이어.
- 전원 연결:
- Connect the 5m blue power cable from the amplifier's +12V terminal to the positive (+) terminal of your car battery.
- Install the AGU fuse holder with the 60Amp fuse within 18 inches (45 cm) of the battery on this power cable.
- Connect the 1m silver power cable from the amplifier's GND terminal to a clean, unpainted metal surface on the vehicle chassis. Ensure a good electrical connection.
- 원격 켜기: Connect the 5.2m remote turn-on cable from the amplifier's REM terminal to the remote output of your car's head unit. This cable turns the amp헤드 유닛으로 라이터를 켜고 끌 수 있습니다.
- RCA 입력: Connect the 5.2m RCA cable from the RCA output of your head unit to the RCA input terminals on the amp리퍼.
이미지 4.1: 클로즈업 view of the EXCALIBUR X600.2 2-channel MOSFET amp입력 및 출력 단자를 보여주는 증폭기.
Image 4.2: The EXCALIBUR X600.2 amplifier shown with the included cable set, illustrating the components for wiring.
4.2. Subwoofer Installation (EXCALIBUR X12.1BR)
The bass reflex boombox is designed to deliver powerful bass. Place it in the trunk or cargo area of your vehicle.
- 놓기: Position the boombox securely in the desired location. Ensure it does not obstruct vision or interfere with safety equipment.
- 배선: Connect the subwoofer output terminals of the amplifier to the input terminals on the X12.1BR boombox using appropriate speaker wire (not explicitly listed in cable set, but implied). Ensure correct polarity (+ to + and - to -).
- 보안: Use straps or brackets to prevent the boombox from shifting during vehicle movement.
이미지 4.3: 앞면 view of the EXCALIBUR X12.1BR 12-inch bass reflex subwoofer boombox.
이미지 4.4: 측면 view of the EXCALIBUR X12.1BR subwoofer boombox, showing the port and enclosure design.
5. 사용 설명서
Once installed, operate your EXCALIBUR X1 system by turning on your car's head unit. The amplifier will power on automatically via the remote turn-on wire.
- 초기 전원 켜기: After installation, double-check all connections before reconnecting the car battery. Turn on your head unit. The amplifier should power on (indicated by an LED, if present).
- 이득 조정: 그만큼 amplifier features a gain control. Start with the gain set to minimum. Play music and slowly increase the gain until the desired volume is achieved without distortion. Avoid setting the gain too high, as this can cause clipping and damage to the subwoofer.
- 크로스오버 설정: 그만큼 amplifier may have a low-pass filter (LPF) control. Adjust this to filter out high frequencies from the subwoofer, allowing it to reproduce only bass notes. A common starting point is 80-100 Hz.
- 베이스 부스트 : Use the bass boost feature sparingly, if available, as excessive bass boost can lead to distortion and potential damage.
- 볼륨 조절: Use your head unit's volume control for overall system volume adjustment.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your car audio system.
- 청소: 유지하다 amplifier and subwoofer free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners directly on components.
- 연결 확인: 모든 배선 연결부의 조임 상태와 부식 여부를 정기적으로 점검하십시오. 연결이 느슨하면 성능 저하나 손상으로 이어질 수 있습니다.
- 통풍: 확인하십시오 amplifier's ventilation areas remain unobstructed.
- 퓨즈 검사: If the system stops working, check the AGU fuse. Replace it only with a fuse of the same rating (60 Amp).
7. 문제 해결
If you encounter issues with your EXCALIBUR X1 system, refer to the following troubleshooting guide:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 없다. amp리퍼 | Blown fuse; loose power/ground connection; remote wire not connected or faulty. | Check and replace fuse; verify all power and ground connections are secure; ensure remote wire is connected to head unit's remote output. |
| 서브우퍼에서 소리가 나지 않습니다 | RCA cables disconnected; speaker wires disconnected or incorrect polarity; amplifier gain too low; head unit settings. | Check RCA connections; verify speaker wire connections and polarity; increase amplifier gain; check head unit's subwoofer output settings. |
| 왜곡된 소리 | Amplifier gain too high; damaged speaker wire; poor ground connection; amp리퍼 과열. | 줄이다 amplifier gain; inspect speaker wires for damage; ensure ground connection is solid; check amplifier ventilation. |
| Amplifier goes into protection mode | Overheating; short circuit in speaker wiring; impedance mismatch. | 허용하다 amplifier to cool; check speaker wiring for shorts; ensure subwoofer impedance matches ampLifier의 능력. |
8. 사양
Detailed technical specifications for the EXCALIBUR X1 Complete Car Audio System components:
8.1. Subwoofer (EXCALIBUR X12.1BR)
- 유형: X12.1BR Bass Reflex Boombox
- RMS 전력: 300 와트
- 피크 파워 : 1000 와트
- 주파수 범위: 35 ~ 1000Hz
- 지름: 12인치(30cm)
- 크기 (가로 x 세로 x 높이): 40.4 x 26/42 x 35.4cm
- 임피던스: 4옴
8.2. Amplifier (EXCALIBUR X600.2)
- 유형: X600.2 MOSFET Amp리퍼
- 채널 수: 2
- Peak Power (Total): 1200 Watts (at 2 ohms)
- 치수(길이 x 너비 x 높이): 24 x 22 x 4.8cm
- 보호 기능: Thermal protection, Short-circuit protection, Overload protection
8.3. Cable Set (EXCALIBUR X8GA)
- 유형: X8GA
- 구성 요소:
- 5m Blue Power Cable
- 1m Silver Power Cable
- 5.2m RCA Cable
- 5.2m Remote Cable
- 1x AGU Fuse Holder
- 1x 60Amp AGU 퓨즈
- 4x Cable Terminals
이미지 8.1: 후면 view of the EXCALIBUR X1 product packaging, displaying detailed specifications for the subwoofer, amplifier, and cable kit.
9. 보증 및 지원
Your EXCALIBUR X1 Complete Car Audio System is covered by a 2년 제조사 보증. 본 보증은 정상적인 사용 중에 발생하는 재료 및 제조상의 결함을 보장합니다.
For warranty claims or technical support, please contact your authorized EXCALIBUR dealer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.
