소개
Thank you for choosing the Seiko Pyxis Alarm Clock NR435W. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and longevity of your device.
제품 끝view
Familiarize yourself with the various parts of your Seiko Pyxis Alarm Clock.
그림 1: 전면 View 알람시계의. This image displays the clock face, which features analog hour, minute, and second hands, along with an alarm setting hand. Below the clock face are buttons for melody selection and volume control.
그림 2: 측면 View with Alarm Switch. The right side of the clock features a prominent slide switch labeled 'ON' and 'OFF' for activating or deactivating the alarm function.
그림 3: 뒤로 View 배터리 칸 포함. The rear of the clock houses the battery compartment, which requires 3 AA batteries, and a speaker grille for the alarm melodies.
주요 구성 요소:
- 음소거 버튼: Large button located on the top of the clock.
- 알람 켜기/끄기 스위치: Slide switch on the right side of the clock.
- 시간 설정 노브: Located on the back (often combined with alarm setting).
- Melody Group Selector: Button on the front, typically on the left.
- Melody Selector / Monitor Button: Button on the front, typically in the middle.
- 볼륨 조절: Rotary knob on the front, typically on the right.
- 배터리 칸: 뒷면에 위치해 있습니다.
설정
1. 배터리 설치
- 시계 뒷면의 배터리함 덮개를 여세요(그림 3 참조).
- Insert 3 AA batteries, ensuring correct polarity (+/-). The clock comes with batteries included.
- 배터리 덮개를 단단히 닫으세요.
- Observe the second hand on the clock face; it should begin moving, indicating the clock is powered.
2. 현재 시간 설정
- Locate the time setting knob on the back of the clock. This knob typically has two positions.
- Gently pull the knob outwards. This usually engages the time-setting mechanism.
- Rotate the knob to move the hour and minute hands to the current time.
- Once the time is set, push the knob back inwards to secure the setting.
작동 지침
1. 알람 시간 설정
- Locate the alarm setting hand on the clock face. This is usually a smaller, distinct hand.
- The same knob used for setting the current time is often used for setting the alarm. Gently pull the knob outwards to its second position (if applicable) or rotate it while it's in the time-setting position to move the alarm hand.
- Rotate the knob until the alarm hand points to your desired wake-up time.
- Push the knob back inwards to secure the alarm setting.
- 메모: As this is a 12-hour analog clock, the alarm will sound twice within a 24-hour period (e.g., if set for 7:00, it will sound at 7:00 AM and 7:00 PM). Remember to activate/deactivate the alarm as needed.
2. 경보 작동/해제
- Locate the Alarm ON/OFF slide switch on the right side of the clock (refer to Figure 2).
- To activate the alarm, slide the switch to the 'ON' (upper) position. The alarm will sound at the set time.
- To deactivate the alarm, slide the switch to the 'OFF' (lower) position. The alarm will not sound.
- 중요한: If you use the alarm daily, remember to slide the switch to 'ON' each evening to ensure it wakes you the next morning.
3. 스누즈 기능 사용하기
- When the alarm sounds, press the large Snooze button on the top of the clock.
- The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes).
- You can repeat this process multiple times.
- To completely turn off the alarm, slide the Alarm ON/OFF switch to the 'OFF' position.
4. Selecting Melodies and Adjusting Volume
- Melody Group Selection: Use the button on the front left (often labeled with musical notes or moods) to switch between different groups of melodies.
- Individual Melody Selection / Monitor: Use the blue button in the middle of the front panel. Pressing this button will play the next melody within the selected group. The last melody played will be the one used for the alarm. You can also use this button to monitor the alarm sound.
- 볼륨 조절: Rotate the knob on the front right (labeled 'Volume' or with 'Min/Max' indicators) to adjust the alarm sound level. To test the volume, first select a melody using the monitor button, then adjust the knob while the melody is playing.
유지
1. 배터리 교체
- When the clock's second hand stops moving or the alarm sound becomes weak, it's time to replace the batteries.
- 시계 뒷면의 배터리 칸을 엽니다.
- 오래된 배터리를 제거하고 지역 규정에 따라 책임감 있게 폐기하십시오.
- 새 AA 배터리 3개를 극성이 올바른지 확인하면서 삽입합니다.
- 배터리 칸을 닫습니다.
- Reset the current time and alarm time after replacing batteries.
2. 청소
- 시계 외부를 부드럽고 마른 천으로 닦으세요.
- 연마성 세척제, 용제 또는 화학 스프레이는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- Avoid getting moisture into the clock's internal components.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Clock does not run / Second hand is still. |
|
|
| 알람이 울리지 않습니다. |
|
|
| Alarm sounds at the wrong time (e.g., PM instead of AM). |
|
|
| Melodies are not changing. |
|
|
명세서
| 모델 번호 | NR435W |
| 상표 | 세이코 |
| 치수(길이 x 너비 x 높이) | 7.1 x 12.9 x 13.6cm(약 2.8 x 5.1 x 5.4인치) |
| 무게 | 350그램(약 0.77파운드) |
| 전원 | 배터리 구동 |
| 필요한 배터리 | 3 x AA(포함) |
| 특징 | Alarm Function with Multiple Melodies |
| 장착 유형 | 테이블탑 |
그림 4: 크기 참조. This image illustrates the compact size of the alarm clock, demonstrating its portability and suitability for various surfaces.
보증 및 지원
For warranty information or technical support, please refer to the official Seiko website or contact your local authorized Seiko dealer. Keep your purchase receipt as proof of purchase.
세이코 공식 웹사이트 Web대지: www.seikoclocks.com
