SEIKO SQ767W

SEIKO SQ767W Digital Alarm Clock User Manual

Model: SQ767W

1. 서론

구매해주셔서 감사합니다asing the SEIKO SQ767W Digital Alarm Clock. This compact and versatile clock features a digital display, dual alarms, a calendar, and displays both temperature and humidity. It is designed for convenience on your bedside table or desktop. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance.

앞쪽 view of the SEIKO SQ767W Digital Alarm Clock, showing the white casing 및 디지털 디스플레이.

그림 1: 전면 view of the SEIKO SQ767W Digital Alarm Clock.

2. 제품 특징

  • 이중 경보: 두 개의 독립적인 알람 시간을 설정하세요.
  • Radio Wave Correction: Automatically corrects time by receiving standard radio waves (40 kHz/60 kHz automatic selection). Includes a radio wave off function.
  • 디지털 디스플레이: Clear display of time, date, temperature, and humidity.
  • 스누즈 기능 : 경보음을 일시적으로 멈춥니다.
  • 가벼운 기능: 어두운 곳에서도 잘 보이도록 디스플레이를 밝힙니다.
  • Alarm Monitor: Allows checking the alarm sound.
  • Alarm Auto Stop: Alarm automatically stops after 5 minutes.
  • 완전 자동 캘린더: Displays the correct date automatically.
  • 온도/습도 표시: Provides current room temperature and humidity readings.

3. 설정

3.1 배터리 설치

  1. 시계 뒷면에 있는 배터리실 덮개를 엽니다.
  2. AA 망간 배터리 2개를 삽입할 때, 극성(+/-)을 올바르게 맞춰주세요.
  3. 배터리 덮개를 단단히 닫으세요.

The clock requires 2 AA batteries, which are included with the product.

3.2 초기 전원 켜기 및 전파 수신

Upon battery installation, the clock will attempt to receive radio waves to set the time automatically. For best reception:

  • 시계를 창문 가까이에 두십시오.
  • Avoid locations with potential radio interference, such as:
    • Inside buildings, basements, or areas with thick walls.
    • 하이볼륨 근처tage lines, TV towers, or train rails.
    • Close to electronic appliances (TVs, refrigerators, air conditioners, computers, etc.).
    • In vehicles (automotive, train, airplane).
    • Near metal furniture like steel desks.

If radio waves are not received, the clock will operate with quartz accuracy. Reception may vary depending on environmental conditions.

Map showing radio wave transmission areas for 40 kHz and 60 kHz frequencies, indicating optimal reception zones.

Figure 2: Radio wave coverage map for time synchronization.

4. 사용 설명서

The control buttons are located on the back of the clock. Refer to Figure 3 for button identification.

뒤쪽에 view of the SEIKO SQ767W Digital Alarm Clock, showing the various control buttons and switches for alarm settings, time/date adjustment, reception, monitor, and reset.

그림 3: 뒤로 view 제어 버튼이 있습니다.

4.1 시간 및 날짜 설정

  • Automatic Setting (Radio Wave): The clock attempts to set the time and date automatically via radio wave reception. Ensure the clock is placed in an optimal reception area.
  • 수동 설정: If radio wave reception is not possible or desired, you can manually set the time and date using the '時刻/日付合わせ' (Time/Date Adjustment) button and other relevant controls on the back. Consult the detailed instructions for specific button sequences.

4.2 알람 설정 (알람 1 및 알람 2)

이 시계는 두 개의 독립적인 알람 기능을 갖추고 있습니다.

  1. Use the 'アラーム時刻合わせ' (Alarm Time Adjustment) button to select Alarm 1 or Alarm 2.
  2. Adjust the desired alarm time using the appropriate adjustment buttons.
  3. Toggle the 'アラーム1 ON/OFF' or 'アラーム2 ON/OFF' switch to activate or deactivate each alarm.

4.3 스누즈 및 조명 기능

Press the large button on top of the clock to activate the snooze function when an alarm sounds. This button also illuminates the display temporarily when pressed outside of an alarm event.

4.4 온도 및 습도 표시

The clock continuously displays the current room temperature and humidity on its screen. No special action is required to view 이러한 수치들.

Close-up of the SEIKO SQ767W Digital Alarm Clock's display, showing time, date, temperature, and humidity readings clearly.

그림 4: 디지털 디스플레이의 확대 사진.

5. 유지관리

5.1 청소

부드럽고 마른 천으로 시계를 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오. 시계가 손상될 수 있습니다.asing 또는 디스플레이.

5.2 배터리 교체

Replace batteries when the display dims or the clock's functions become unreliable. Always replace both batteries at the same time with new AA manganese batteries. Dispose of used batteries according to local regulations.

6. 문제 해결

  • Clock not displaying time/functions: 배터리 설치를 확인하고 배터리가 방전되지 않았는지 확인하세요.
  • 시간이 잘못되었습니다: Ensure the clock is in an optimal location for radio wave reception. If automatic correction fails, manually set the time.
  • 알람이 울리지 않습니다: Verify that the alarm is set to 'ON' and the alarm time is correctly configured.
  • 화면이 어둡습니다: 배터리를 교체하세요.
  • Radio wave reception issues: Relocate the clock away from electronic devices, metal objects, or large structures that may interfere with signals.

7. 사양

특징세부 사항
상표SEIKO
모델 번호SQ767W
디스플레이 유형디지털
색상하얀색
제품 치수3.5 x 5.0 x 2.3인치(9.0 x 12.7 x 5.8cm)
품목 무게0.4 lbs (210 grams / 7.4 ounces)
재료플라스틱
전원배터리 구동(AA 배터리 2개 필요, 포함)
특별 기능Calendar Display, Loud Alarm, Temperature/Humidity Display, Radio Wave Correction
경보 채널2
Alarm Auto Stop5 분
연결 기술라디오
장착 유형독립형
원산지중국

8. 보증 및 지원

For warranty information or technical support, please refer to the documentation included with your purchase or contact SEIKO customer service. Keep your purchase receipt as proof of purchase.

관련 문서 - SQ767W

사전view Seiko QHL095-W 시계 사용 설명서 - 설정 및 작동 가이드
세이코 QHL095-W 시계에 대한 종합 가이드로, 설정, 시간 및 알람 설정, 작동, 유지 관리 및 문제 해결 방법을 다룹니다. 세이코 시계의 최적 성능을 보장하세요.
사전view 세이코 시계 사용 설명서 - 모델 QHL079-K
세이코 시계 모델 QHL079-K의 작동 방법에 대한 자세한 설명입니다. 시간 설정, 달력, 알람, 타이머, 스톱워치 및 조명 기능 사용 방법을 포함합니다.
사전view 세이코 디지털 시계 사용 설명서
세이코 디지털 시계의 시간 설정, 알람 기능, 온도 표시 및 일광 절약 시간(DST)에 대한 자세한 사용 설명서입니다.
사전view 세이코 R-Wave XR131-1 전파 수신 시계 사용 설명서
세이코 R-Wave XR131-1 전파 시계 공식 사용 설명서입니다. 작동 원리, 설정, 시간대 설정, 자동 및 수동 시간 설정, 일광 절약 시간제(DST) 및 사양에 대해 알아보세요.
사전view 세이코 시계 1년 한정 보증서
이 문서에서는 세이코 시계 1년 제한 보증의 약관과 조건을 간략하게 설명하며, 여기에는 보증 범위, 제한 사항, 보증 서비스를 받기 위한 절차 등이 포함됩니다.
사전view 세이코 멜로디 시계 사용 설명서
세이코 멜로디 시계의 사용 설명서로, 설정, 시간 및 볼륨 조정, 멜로디 선택, 데모 모드, 조도 센서 기능, 배터리 수명 정보 등에 대한 자세한 설명이 나와 있습니다.