Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit Manual

1. 서론

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, white

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. 안전 지침

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of injury or damage.

전문 설치 권장: Installation should ideally be performed by a qualified professional to ensure compliance with local building codes and proper functionality.
지침을 읽어보세요: 설치를 시작하기 전에 모든 지침을 주의 깊게 읽으십시오.
보호 장비를 착용하세요: 설치 시에는 장갑과 보안경과 같은 적절한 개인 보호 장비(PPE)를 착용하십시오.
손상 여부 검사: Before installation, inspect the product for any signs of damage. Do not install damaged components.
적절한 환기: 설치 중 및 설치 후 적절한 환기가 이루어지도록 하십시오.
어린이의 손이 닿지 않는 곳에 보관하세요: 이 제품은 장난감이 아닙니다. 어린이의 손이 닿지 않는 곳에 보관하세요.
처분: Dispose of packaging materials responsibly and according to local regulations.

3. 패키지 내용

설치를 진행하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.

1 x Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Unit
Installation accessories (e.g., mounting screws, seals - may vary by kit version)
사용 설명서 (본 문서)

4. 설정 및 설치

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

위치를 선택하십시오 : Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
오프닝 준비: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's web대지).
Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
보안 장치: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
씰을 적용하세요: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
테스트 기능: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official web대지.

5. 사용 설명서

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

자동 조정: The internal sensor detects changes in ambient humidity. As humidity increases (e.g., during showering or cooking), the air inlet opens further to allow more fresh air in. As humidity decreases, it reduces the airflow.
음향 성능: The "39dB" rating indicates its acoustic attenuation capabilities, designed to reduce external noise transmission while maintaining ventilation.
사용자 제어 없음: This unit operates automatically and does not typically feature manual controls for airflow adjustment. Its design is intended for passive, demand-controlled ventilation.

6. 유지관리

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

청소 빈도: It is recommended to clean the air inlet at least once a year, or more frequently in dusty environments.
청소 절차:
1. Gently remove the front cover of the air inlet.
2. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the grille and internal components.
3. 외부 표면을 광고로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
4. Ensure the humidity sensor (if visible) is free from dust and obstructions.
5. 전면 커버를 단단히 다시 부착하세요.
방해하지 마십시오: Ensure that the air inlet is never blocked by furniture, curtains, or other objects, as this will impair its performance.
점검: 주기적으로 장치를 검사하여 손상이나 마모 흔적이 있는지 확인하세요.

7. 문제 해결

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

문제	가능한 원인	해결책
불충분한 공기 흐름	Air inlet or outer grille is obstructed. Dust accumulation on internal components. Humidity sensor is blocked or faulty. Incorrect installation or sealing.	장애물을 확인하고 제거하십시오. Clean the air inlet as described in the Maintenance section. Ensure the humidity sensor is clear. If still faulty, contact support. Verify proper installation and sealing.
과도한 소음	Loose components or improper sealing. External noise sources. Air inlet operating at maximum flow due to high humidity.	Check mounting screws and seals. Identify and address external noise sources. This is normal operation. Ensure the unit is clean.
Unit Not Adjusting	Humidity sensor is dirty or damaged. Mechanical obstruction of the adjustment mechanism.	Clean the humidity sensor. If still unresponsive, the sensor may be faulty. 이동을 방해하는 물리적 장애물이 있는지 점검하십시오.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. 사양

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

모델 번호: 11014085 (also AJA50015)
상표: 알데스
유형: Hygro-Adjustable Acoustic Air Inlet Kit
공기 흐름 범위: 6 to 45 Liters per second (L/s)
Acoustic Attenuation: 39데시벨
색상: 하얀색
모양: 직사각형
제조업체: ALDES AERAULIQUE
포함된 구성 요소: 1 Product (Air Inlet Unit)
필요한 배터리: 아니요
제품 카테고리: Performance Part (HVAC, Ducts)
ASIN: B00DCK2EMW

9. 보증 및 지원

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

제조업체: ALDES AERAULIQUE
Web대지: www.aldes.com
고객 서비스: Refer to the ALDES web지역별 연락처 정보는 사이트를 참조하세요.
예비 부품: Information regarding spare parts availability is not provided in the product specifications. Please contact ALDES customer service for details.

	Aldes EHL L 6-44 m³/h - 39 dB - 화이트: 음향 습도 조절 공기 흡입 키트 Detailed information on the Aldes EHL L hygrometric air inlet kit, including its technical specifications, acoustic performance, dimensions, and installation guidelines. This kit provides adjustable airflow for residential buildings, ensuring optimal air quality and acoustic comfort.
	Aldes EHL S 6-44 m³/h - 37 dB - White: Hygro-Regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow, and ceiling-directed air flow. Includes technical specifications, dimensions, and installation guidelines.
	Aldes EHL S 6-44 m³/h - 37 dB Aluminium Air Inlet - Technical Specifications Detailed technical specifications for the Aldes EHL S 6-44 m³/h - 37 dB Aluminium hygro-regulated air inlet, including features, dimensions, acoustic data, and installation guidelines.
	Aldes EHL L 6-44 m³/h - 39 dB 무연탄색 습도 조절식 공기 흡입구 Aldes EHL L 습도 조절식 공기 흡입구(모델 11014138, 무연탄 색상)의 기술 사양 및 설치 안내서입니다. 최대 42dB의 소음 감쇠 기능과 6~44m³/h의 조절 가능한 풍량을 제공합니다.
	Aldes EHL S 6-44 m³/h - 37 dB - Brown Hygro-regulated Air Inlet Technical specifications and installation guide for the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a discreet design. Includes dimensions, accessories, and acoustic data.
	Aldes EHL S 6-44 m³/h - 37 dB - Anthracite: Hygro-regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a sleek design. Includes technical specifications, dimensions, and available accessories.

ALDES 11014085

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit