1. 서론
The Wright Products V2012WH Heavy Duty Pneumatic Screen & Storm Door Closer is designed to provide reliable and controlled closing for out-swinging storm or screen doors. Featuring an innovative EZ-Hold "Tap-N-Go" function, this closer allows for convenient hands-free operation. Its durable construction and adjustable closing speed make it suitable for various door types, from light to heavy-duty applications.
Image 1.1: The Wright Products V2012WH door closer with all included mounting hardware, including screws and brackets.
2. 제품 특징
- EZ-HOLD Open Function: Allows the door to be held open at any desired position with a simple tap, providing hands-free convenience.
- 뛰어난 내구성: Engineered for robust use on heavier storm and security doors, ensuring consistent and reliable operation.
- 조정 가능한 속도 제어: Features a thumbscrew dial for easy, tool-free adjustment of the door's closing speed.
- Smooth Pneumatic Closing: Air-cushioned tube prevents door slamming, ensuring quiet and secure closure.
- 범용 설치: Designed for quick and easy installation on most out-swinging doors, with all necessary mounting hardware included.
Image 2.1: Product packaging illustrating the convenient EZ-Hold open feature and heavy-duty design.
3. 호환성
This door closer is compatible with a wide range of out-swinging doors. Ensure your door meets the following criteria for optimal performance:
- Designed for out-swinging wood or metal doors.
- Suitable for doors ranging from 3/4-inch to 2-inch thick.
- Features seasonal latching adjustment, allowing for switching between glass or screen inserts.
Image 3.1: Visual guide detailing the compatibility of the door closer with various door types and thicknesses.
4. 설정 및 설치
4.1 필요한 도구
- 송곳
- Drill bits (appropriate size for screws)
- 드라이버(십자 드라이버 권장)
- 줄자
- 연필
4.2 설치 단계
- 문 준비: Ensure the door frame and door surface are clean and free of obstructions.
- 장착 위치 결정: For optimal performance, mount the closer at the top of the door, on the side that swings out. For heavier doors, a second closer can be mounted at the bottom.
- 도어 브래킷 부착 : Position the door bracket on the door frame, ensuring it is level and aligned. Mark the screw holes with a pencil. Drill pilot holes and secure the bracket with the provided screws.
- Attach Closer to Door: Attach the closer body to the door itself using the provided screws and bracket. Ensure the closer is parallel to the door frame when the door is closed.
- Connect Pin: Insert the connecting pin through the closer rod and the door frame bracket.
- 테스트 작업: Slowly open and close the door to ensure smooth operation. Adjust the closing speed as needed (refer to Section 5).
Image 4.1: The Wright Products door closer correctly installed on an out-swinging storm door, demonstrating its low-profile 모습.
Image 4.2: Technical diagram illustrating the dimensions of the heavy-duty pneumatic closer for proper fit and installation.
Image 4.3: Diagram showing the location of the model number (V2012WH) and adjustable closing speed indicator on the closer body.
5. 사용 설명서
5.1 EZ-Hold "Tap-N-Go" Feature
To engage the EZ-Hold feature, simply push the button located on the closer body prior to opening your door to the desired location. The door will remain open. To disengage the hold-open feature and allow the door to close, gently push the door open slightly further, or give it a small 'tap'. The mechanism will release, and the door will begin to close.
5.2 닫힘 속도 조절
The closing speed of the door can be adjusted using the thumbscrew dial located at the end of the closer. Turning the thumbscrew clockwise will decrease the closing speed (slower), and turning it counter-clockwise will increase the closing speed (faster). Adjust gradually until the desired closing speed is achieved, ensuring the door closes securely without slamming.
6. 유지관리
The Wright Products V2012WH door closer is factory lubricated and designed for minimal maintenance. Periodically inspect the closer and mounting hardware for any signs of wear, looseness, or damage. Ensure all screws are tight. Do not attempt to disassemble the closer, as it contains pressurized components. If the closer is damaged or not functioning correctly, replacement is recommended.
7. 문제 해결
| 문제 | 해결책 |
|---|---|
| 문이 쾅 닫혔다 | Adjust the closing speed by turning the thumbscrew clockwise to slow it down. |
| 문이 완전히 닫히지 않습니다 | Adjust the closing speed by turning the thumbscrew counter-clockwise to speed it up. Check for obstructions or binding in the door hinges. |
| EZ-Hold feature not engaging/disengaging | Ensure the button is fully depressed to engage. To disengage, push the door slightly further open. If issues persist, the mechanism may be worn and require replacement. |
| Closer leaks fluid | This indicates internal seal failure. The closer cannot be repaired and must be replaced. |
| Closer makes excessive noise | Ensure the closer is securely mounted and all screws are tight. If noise persists, the internal mechanism may be faulty, requiring replacement. |
8. 사양
| 사양 | 세부 사항 |
|---|---|
| 모델 번호 | V2012WH |
| 재료 | 알류미늄 |
| 색상 | 하얀색 |
| 품목 무게 | 0.01 Ounces (Note: This weight seems incorrect, likely a data entry error. Actual weight is typically higher for such a product.) |
| 제품 크기(L x W x H) | 3.13" x 3.88" x 15.88" (approximate, unextended) |
| 설치 유형 | 나사로 고정 |
| 개방 범위 | Full 90 degrees |
| 한국어: | 654204513974, 039208995627 |
9. 보증 정보
Wright Products offers a Lifetime Warranty on this product. For specific details regarding warranty claims, coverage, and limitations, please refer to the official warranty documentation included with your purchase or contact Wright Products customer support.
10. 고객 지원
For further assistance, technical support, or to inquire about replacement parts, please visit the official Wright Products store or contact their customer service department.
Wright Products Official Store: 매장 방문
