Cisco Catalyst 2960S-48TD-L 이더넷 스위치 사용자 설명서

1. 제품 오버view

The Cisco Catalyst 2960S-48TD-L is a fixed-configuration, stackable Gigabit Ethernet switch designed for enterprise, mid-market, and branch office networks. It provides 48 Gigabit Ethernet ports and offers advanced Layer 2 switching capabilities, including Cisco FlexStack stacking and Power over Ethernet Plus (PoE+) support. This switch is engineered for ease of use, secure business operations, and improved sustainability.

1.1 전면 패널 기능

그림 1: 전면 패널 View. This image displays the front panel of the Cisco Catalyst 2960S-48TD-L switch, featuring 48 Gigabit Ethernet ports for network connectivity and two SFP+ uplink ports on the right side for high-speed connections to the network core or other switches. Status LEDs are visible above each port, indicating port status, speed, and PoE activity.

1.2 후면 패널 기능

그림 2 : 후면 패널 View. This image shows the rear panel of the Cisco Catalyst 2960S-48TD-L switch, including the AC power input connector, a console port for out-of-band management, and ventilation grilles for cooling. The model number and serial number labels are also visible for identification.

2. 설정 및 설치

2.1 풀기 및 검사

Carefully unpack the switch and verify that all components are present and undamaged. The package should contain:

• Cisco Catalyst 2960S-48TD-L Ethernet Switch
• AC 전원 코드
• 랙 마운트 키트(포함된 경우)
• 문서(빠른 시작 가이드, 안전 정보)

If any items are missing or damaged, contact your Cisco representative immediately.

2.2 랙 마운팅

The switch can be mounted in a standard 19-inch equipment rack. Follow these steps:

1. 제공된 나사를 사용하여 랙 마운트 브래킷을 스위치 측면에 부착합니다.
2. Align the switch with the rack posts and secure it using the rack screws.
3. Ensure adequate airflow around the switch for proper cooling.

2.3 전원 연결

Connect the supplied AC power cord to the power connector on the rear panel of the switch and then to a grounded AC power outlet. The switch will automatically power on once connected.

2.4 네트워크 연결

Connect Ethernet cables from your network devices (computers, servers, other switches) to the RJ-45 ports on the front panel. For high-speed uplinks, use appropriate SFP+ transceivers and fiber optic cables in the dedicated SFP+ slots.

3. 사용 설명서

3.1 초기 전원 켜기

Upon connecting power, the switch will initiate its boot sequence. Observe the system LED on the front panel. It will cycle through various states (amber, green) and eventually turn solid green, indicating successful boot-up and readiness for operation.

3.2 스위치 액세스

You can access and configure the switch using several methods:

• 콘솔 포트: Connect a console cable (RJ-45 to DB-9) from your management workstation to the console port on the rear panel. Use a terminal emulation program (e.g., PuTTY, Tera Term) with settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
• 텔넷/SSH: Once the switch has an IP address configured, you can access it remotely via Telnet (less secure) or SSH (recommended for security) using its IP address.
• Web Interface (HTTP/HTTPS): If enabled and configured, you can access the switch's webIP 주소를 입력하여 -기반 관리 인터페이스를 구성합니다. web 브라우저.

3.3 기본 구성

Refer to the Cisco IOS Software Configuration Guide for detailed configuration instructions. Common initial configurations include:

• Setting the hostname
• Configuring IP addresses for management interfaces (VLAN 1 by default)
• Setting up user accounts and passwords
• Enabling SSH for secure remote access
• Configuring VLANs and port assignments

4. 유지관리

4.1 청소

Periodically clean the exterior of the switch with a soft, dry cloth. Ensure that the ventilation openings are free from dust and debris to maintain proper airflow and prevent overheating. Do not use liquid or aerosol cleaners directly on the switch.

4.2 펌웨어 업데이트

시스코를 정기적으로 점검하세요 website for the latest firmware (IOS) updates for your switch model. Keeping the firmware up-to-date ensures optimal performance, security, and access to new features. Follow Cisco's recommended procedures for firmware upgrades to avoid service interruptions.

5. 문제 해결

5.1 전원 문제

• 전원 없음: Verify the power cord is securely connected to both the switch and the power outlet. Check the power outlet with another device.
• 시스템 LED 꺼짐: If the system LED is off after connecting power, the switch may not be receiving power or could be faulty.

5.2 네트워크 연결 문제

• Port LED Off: Ensure the Ethernet cable is properly connected at both ends. Check the connected device for power and proper operation.
• 네트워크 접속 불가: Verify IP configuration on the switch and connected devices. Check VLAN assignments and ensure routing is correctly configured if necessary.

5.3 성능 문제

• Slow Network: Check for high CPU utilization on the switch. Inspect port statistics for errors, collisions, or excessive broadcasts. Consider upgrading to higher-speed uplinks if bandwidth is a bottleneck.
• 간헐적인 연결: Inspect cables for damage. Check for duplex mismatches between the switch port and the connected device.

6. 기술 사양

7. 보증 및 지원

This Cisco product is covered by Cisco's standard warranty. For detailed warranty information, technical support, and additional resources, please visit the official Cisco website or contact your authorized Cisco partner. Ensure you have your product's serial number available when seeking support.