바이퍼 7145V 리모컨 교체 사용자 설명서

소개

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Viper 7145V 4-button 1-way remote replacement. This remote is designed to function with compatible Viper security and remote start systems, offering convenient control over your vehicle's security features.

The Viper 7145V remote offers a range of up to 1/4 mile (approximately 400 meters) for reliable communication with your vehicle's system.

제품 끝view

Figure 1: Viper 7145V 4-Button Remote Control. Features a black casing with a blue LED indicator, a lock button, an unlock button, an AUX button, and an orange asterisk button, along with a metal keyring attachment.

The Viper 7145V is a compact, ergonomic 4-button remote control. It is a direct replacement or additional remote for several Viper security and remote start systems.

주요 특징:

• 1-Way communication
• 4-Button functionality
• Up to 1/4 mile (400 meters) operating range
• 인체공학적 디자인

시스템 호환성:

This remote is compatible with the following Viper system models:

• 4105V
• 5305V
• 3305V
• 5105V
• 3102V
• 3105V

메모: Always verify your existing system's model number to ensure full compatibility.

설정 및 프로그래밍

To program your new Viper 7145V remote, you will need access to your vehicle's Valet button. The Valet button is typically located near the alarm's control module, under the dashboard, or in the fuse box area. Consult your vehicle's alarm installation manual or a qualified installer if you cannot locate it.

프로그래밍 단계:

1. Ensure all vehicle doors are closed and the ignition key is removed.
2. Open the driver's side door.
3. Insert the ignition key and turn it to the "ACC" or "ON" position.
4. Press and release the Valet button once. Then, immediately press and 잡고 있다 the Valet button.
5. The system will emit a chirp or honk, indicating it is in programming mode.
6. While still holding the Valet button, press the 잠그다 button on your new 7145V remote. The system will chirp once to confirm the remote has been learned for Channel 1 (typically Lock/Unlock).
7. Release the Valet button.
8. To program additional functions (e.g., AUX, Panic), repeat steps 3-4, but for step 4, press and release the Valet button the corresponding number of times for the desired channel before holding it down. For example, for Channel 2, press and release Valet twice, then hold.
9. Once the system chirps to indicate the channel, press the corresponding button on your remote (e.g., AUX for Channel 2, Asterisk for Channel 3).
10. After programming all desired buttons, turn the ignition key to the "OFF" position to exit programming mode. The system will chirp to confirm exit.

중요 참고 사항: Some systems may require pressing the Valet button 7 times and holding on the 8th press to enter programming mode for certain channels. If the standard method does not work, consult your specific Viper system's manual or a professional installer.

작동 지침

The Viper 7145V remote provides control over your vehicle's security and remote start functions. The primary functions are typically assigned as follows:

• 잠금버튼():
  • 버튼을 한 번 누르면 보안 시스템이 작동하고 차량 문이 잠깁니다.
  • Press once to disarm the security system and unlock the vehicle doors (on some systems, this button may control both lock and unlock).
• 잠금 해제 버튼():
  • 한 번 누르면 보안 시스템이 해제되고 차량 문이 잠금 해제됩니다.
  • 메모: On some newer remote designs or older alarm systems, the unlock button may not function independently, and the lock button may perform both lock and unlock actions.
• AUX 버튼 (AUX):
  • Typically used for auxiliary functions such as silent arming/disarming (press AUX then Lock), trunk release, or other custom programmed features. Refer to your system's specific manual for AUX channel assignments.
• Asterisk Button (*):
  • Commonly assigned as the Panic button. Press and hold to activate the vehicle's alarm siren and flashing lights. Press again to deactivate.
  • Can also be programmed for other custom functions depending on your system's configuration.

For remote start functionality, typically a combination of button presses (e.g., pressing the Lock button twice) is required. Consult your specific Viper system's manual for remote start activation procedures.

유지

배터리 교체:

The Viper 7145V remote requires AAA 배터리 1개 for operation. When the remote's range decreases or it becomes unresponsive, it is likely time to replace the battery.

1. 리모컨 뒷면에서 배터리 덮개를 찾으세요.
2. Using a small flat-head screwdriver or a coin, gently pry open the battery cover.
3. Remove the old AAA battery, noting its orientation (+/-).
4. 극성을 확인하여 새 AAA 배터리를 삽입하십시오.
5. Snap the battery cover back into place until it is securely closed.
6. Test the remote's functionality.

주의: 현지 규정에 따라 오래된 배터리를 책임감 있게 폐기하십시오.

문제 해결

명세서

• 모델 번호: 7145V
• 제품 크기: 8 x 5.8 x 0.5 인치
• 품목 무게: 1.44 온스
• 색상: 검은색
• 배터리 요구 사항: AAA 배터리 1개(필수)
• 연결성: 무선 전화
• 최대 범위: Approximately 400 meters (1/4 mile)
• 제조업체: DIRECTED INSTALLATION ESSENTIALS (Viper)
• 상자 안에 무엇이 들어있나요? 4 버튼 리모컨

보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your original Viper security or remote start system, or visit the official Viper web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

For further assistance, you may contact Viper customer support or consult a certified Viper installer.

Viper Official Web대지: www.viper.com