ADJ Sweeper Beam Quad LED Instruction Manual

1. 서론

This manual provides detailed instructions for the safe and efficient operation of your ADJ Sweeper Beam Quad LED fixture. The Sweeper Beam Quad LED is a professional stage lighting unit designed to produce dynamic lighting effects. It features eight powerful RGBW LEDs that create sweeping beams, pulse, and strobe effects with 270 degrees of tilt. This unit supports various operational modes including stand-alone, sound active, and DMX control.

2. 안전 지침

• Always connect the fixture to a grounded circuit.
• 작업 전에 모든 연결이 안전한지 확인하세요.
• 전원 코드가 손상된 경우 조명기구를 작동하지 마십시오.
• 광원에 눈이 직접 노출되지 않도록 하십시오.
• 과열을 방지하기 위해 조명기구 주변에 적절한 환기를 확보하세요.
• 유지보수 또는 청소를 하기 전에 전원을 차단하십시오.
• This product is for professional use. Installation should be performed by qualified personnel.

3. 설정

3.1 풀기

Carefully unpack the fixture and inspect it for any damage during shipping. If any damage is found, contact your dealer immediately.

3.2 장착

The Sweeper Beam Quad LED includes mounting brackets for secure installation. Always use a safety hook on the rear panel as an additional safety measure when suspending the unit. Ensure the mounting surface can support the weight of the fixture.

3.3 전원 연결

Connect the fixture to a compatible power source using the provided IEC power cable. The unit supports daisy-chaining for power, allowing up to 4 units at 120V or 7 units at 230V to be connected from a single power outlet.

Figure 1: ADJ Sweeper Beam Quad LED fixture overview. This image displays the main unit with its eight distinct LED lenses, highlighting the robust black housing and overall design.

4. 작동 모드

The Sweeper Beam Quad LED offers multiple operational modes to suit various lighting requirements.

4.1 독립 실행형 모드

In stand-alone mode, the fixture operates using its built-in programs. Use the 4-button DMX LED display on the unit to select desired pre-programmed sequences and effects.

4.2 Sound Active Mode

The sound active mode allows the fixture to react to music and audio input. The internal microphone detects sound, and the light effects will pulse and change in sync with the beat. Adjust sensitivity via the control panel if available.

4.3 DMX 컨트롤 모드

For advanced control, connect the fixture to a DMX controller using a wired digital network. The unit supports 1, 6, 35, or 39 DMX channels, providing comprehensive control over individual LEDs, tilt, dimming (0-100%), pulse, and strobe effects. Refer to the DMX channel chart (typically found in a separate DMX manual or on the manufacturer's website) for specific channel functions.

그림 2: 예ample of dynamic light beams produced by the Sweeper Beam Quad LED. This image illustrates the sweeping motion and vibrant color mixing capabilities of the fixture in operation.

그림 3: 또 다른 view of the Sweeper Beam Quad LED's light output, showcasing a fan-like beam pattern. This demonstrates the fixture's ability to create diverse visual effects.

5. 유지관리

5.1 청소

To maintain optimal light output and extend the lifespan of your fixture, regularly clean the lenses and exterior casing. Use a soft, lint-free cloth and a mild glass cleaner. Ensure the fixture is disconnected from power before cleaning.

5.2 LED 수명

The LEDs in this fixture are rated for approximately 50,000 hours of use. Due to the low heat output of LED technology, there is no need for duty cycles, allowing for continuous operation.

6. 문제 해결

• 전원 없음: Check the power cable connection at both the fixture and the power outlet. Ensure the outlet is active.
• 빛 출력 없음: Verify the fixture is receiving power. Check the selected operating mode (e.g., ensure DMX signal is present if in DMX mode).
• 조명기구가 DMX에 응답하지 않습니다: Confirm DMX cable connections are secure. Check DMX address settings on the fixture and controller. Ensure the DMX controller is sending a signal.
• Abnormal Movement/Stuck Beam: 전원을 차단하고 잠시 기다린 후 다시 연결하십시오. 문제가 지속되면 고객 지원팀에 문의하십시오.

7. 사양

8. 보증 및 지원

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official ADJ Products web웹사이트에서 고객 서비스 연락처 정보를 찾을 수 있습니다.