Unitech MS840 Rugged Handheld Laser Scanner
Model: MS840-SUBBGC-SG
1. 서론
The Unitech MS840 is a high-performance, rugged handheld laser scanner designed for demanding environments. It offers reliable and accurate barcode scanning capabilities, making it ideal for various applications including retail, logistics, and inventory management. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MS840 scanner.
Image 1.1: The Unitech MS840 Rugged Handheld Laser Scanner. This image shows the dark blue and light blue scanner from a slight angle, highlighting its ergonomic design and the laser scanning window at the front.
2. 안전 정보
Please read all safety instructions carefully before using the Unitech MS840 scanner to prevent injury or damage to the device.
- 레이저 안전 : This device uses a Class 1 laser. Do not stare directly into the laser beam or point it at others.
- 전기 안전: Use only the provided USB cable. Do not expose the device to water or extreme temperatures.
- 손질: The MS840 is rugged, but avoid dropping it from excessive heights or subjecting it to severe impacts.
- 처분: Dispose of the device and its components according to local environmental regulations.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Unitech MS840 Handheld Laser Scanner
- USB 연결 케이블
- 빠른 시작 가이드(해당되는 경우)
4. 설정
Follow these steps to set up your Unitech MS840 scanner:
- USB 케이블 연결:
Insert the smaller end of the USB cable into the port at the base of the MS840 scanner. Connect the larger end of the USB cable to an available USB port on your computer (Laptop or Desktop).
- 드라이버 설치:
The MS840 is typically a plug-and-play device and should be recognized automatically by most operating systems. If prompted, allow your system to install the necessary drivers. No additional software installation is usually required for basic operation.
- 초기 테스트:
Open a text editor or a program where you can input text (e.g., Notepad, Word). Scan a known barcode. If the setup is successful, the barcode data should appear in the opened application.
5. 스캐너 작동
The Unitech MS840 is designed for simple and efficient barcode scanning.
- 전원 켜기: The scanner powers on automatically when connected to a powered USB port.
- 조준: Hold the scanner with the scanning window facing the barcode. Press the trigger button located on the handle. A red laser line will project from the scanning window.
- 스캐닝: Position the laser line across the entire barcode. Ensure the barcode is flat and well-lit.
- 스캔 성공 표시: Upon a successful read, the scanner will typically emit an audible beep and/or an LED indicator will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
- 지원되는 바코드: The MS840 is a laser scanner, primarily designed for 1D (linear) barcodes.
6. 유지관리
Proper maintenance ensures the longevity and optimal performance of your MS840 scanner.
- 스캔 창 정리:
스캔 창은 부드럽고 보풀 없는 천으로 정기적으로 닦아주세요. 잘 지워지지 않는 얼룩은 약간 두드려 닦아주세요.amp천에 물이나 순하고 마모성이 없는 세척액을 적셔주세요. 강한 화학 물질이나 연마제를 사용하지 마세요.
- 일반 청소:
스캐너 외부를 부드러운 천으로 닦으세요.amp 천으로 감싸십시오. 구멍에 습기가 들어가지 않도록 하십시오.
- 케이블 관리:
Avoid bending or twisting the USB cable excessively. Store the cable neatly when not in use to prevent damage.
- 저장:
Store the scanner in a clean, dry environment away from direct sunlight and extreme temperatures when not in use.
7. 문제 해결
If you encounter issues with your MS840 scanner, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스캐너 전원이 켜지지 않습니다. | USB 케이블이 제대로 연결되지 않았거나 USB 포트에 결함이 있습니다. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port on your computer. |
| 스캐너가 바코드를 읽지 못합니다. | Barcode damaged, poor lighting, incorrect aiming, or unsupported barcode type. | Ensure the barcode is clear and undamaged. Provide adequate lighting. Aim the laser line directly across the barcode. Verify it's a 1D barcode. Clean the scanning window. |
| 스캔한 데이터가 화면에 나타나지 않습니다. | Application not in focus, incorrect keyboard layout, or driver issue. | Click into the text field of the application where you want the data to appear. Restart the application or computer. Check device manager for driver status. |
| 스캐너에서 삐 소리가 나지만 데이터가 없습니다. | Data transmission issue or application not ready. | Ensure the cursor is active in the target application. Try scanning into a simple text editor like Notepad to isolate the issue. |
If the problem persists after trying these solutions, please contact Unitech customer support.
8. 사양
Detailed technical specifications for the Unitech MS840 scanner:
| 특징 | 설명 |
|---|---|
| 상표 | 유니텍 |
| 모델 | MS840-SUBBGC-SG |
| 스캐너 유형 | Hand-held Laser Scanner |
| 스캔 요소 유형 | 원자 램프 |
| Scan Speed / Rate | 100 scans/second (100 fps) |
| 연결 기술 | 케이블(USB) |
| 인터페이스 유형 | USB |
| 호환 장치 | 노트북, 데스크탑 |
| 제품 크기(LxWxH) | 2.54 x 2.54 x 2.54cm(25 x 25 x 25밀리미터) |
| 품목 무게 | 454g(453.59g) |
| 필요한 배터리 | 아니요 |
| ASIN | B00C4OGY2I |
| 국제 무역 식별 번호(GTIN) | 00132017875439 |
| 첫 번째 가능한 날짜 | 30년 2013월 XNUMX일 |
9. 보증 및 지원
Unitech products are manufactured to high quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Unitech web대지.
For technical support, service, or further inquiries, please contact Unitech customer service through their official channels. Have your model number (MS840-SUBBGC-SG) and ASIN (B00C4OGY2I) ready when contacting support.
Note: Contact information for Unitech can typically be found on their official web사이트 또는 제품 포장.
