1. 서론
This manual provides essential information for the proper installation, operation, and maintenance of the Simplex 4098-9733 Heat Detector. Adherence to these instructions is crucial for ensuring the detector's optimal performance and compliance with safety standards.
1.1 Purpose of this Manual
The purpose of this document is to guide qualified personnel through the necessary steps for deploying and managing the Simplex 4098-9733 Heat Detector within a fire alarm system. It covers technical specifications, installation procedures, operational guidelines, and maintenance recommendations.
1.2 중요 안전 정보
항상 다음 안전 예방 조치를 준수하십시오.
- 설치 및 서비스는 자격을 갖춘 인력에 의해서만 수행되어야 합니다.
- Disconnect power to the fire alarm control panel before installing, removing, or servicing the detector.
- Refer to local codes and national standards (e.g., NFPA 72) for specific installation requirements.
- Do not paint the detector. Paint can interfere with its ability to detect heat.
- 전기 위험을 방지하기 위해 적절한 접지를 확인하십시오.
2. 제품 오버view
The Simplex 4098-9733 is a fixed-temperature heat detector designed to provide reliable fire detection by responding to a specific temperature threshold. It is typically integrated into a larger fire alarm system.
2.1 주요 특징
- Fixed temperature detection at 135°F (57°C).
- Audible alarm capability (when connected to a compatible system).
- 내구성이 뛰어난 금속 및 플라스틱 구조.
- Designed for integration with Simplex fire alarm control panels.
2.2 제품 구성품
The Simplex 4098-9733 Heat Detector consists of the main detector head and typically requires a compatible mounting base (sold separately) for installation into a fire alarm circuit.
This image displays a cardboard box containing numerous Simplex 4098-9733 heat detectors. Each detector is red, circular, and encased in clear plastic packaging, indicating new, unused units ready for installation.
3. 설정 및 설치
3.1 설치 전
- Verify that the detector model 4098-9733 is compatible with your existing fire alarm control panel.
- Ensure all necessary tools and mounting hardware are available.
- Confirm that the installation location complies with local fire safety codes and manufacturer recommendations for heat detector placement.
3.2 검출기 장착
The 4098-9733 detector requires a compatible mounting base (e.g., Simplex 4098-9792, 4098-9789, or similar, sold separately) for proper installation.
- Turn off all power to the fire alarm control panel and associated circuits.
- Mount the detector base securely to a standard electrical box or directly to the ceiling/wall according to local codes.
- Connect the wiring from the fire alarm control panel to the appropriate terminals on the detector base (refer to the wiring diagram below).
- Align the detector head with the mounting base and rotate clockwise until it locks into place.
- Restore power to the fire alarm control panel and test the detector.
3.3 배선
Proper wiring is critical for the detector's functionality. Refer to the specific wiring diagram provided with your detector base and fire alarm control panel documentation. A typical wiring configuration for a two-wire system is as follows:
| 단말기 | 설명 |
|---|---|
| 1 | Signal Line In (+) |
| 2 | Signal Line Out (+) |
| 3 | Signal Line In/Out (-) |
| 4 | Remote Annunciator (if applicable) |
4. 사용 설명서
4.1 정상 작동
Under normal conditions, the Simplex 4098-9733 Heat Detector continuously monitors the ambient temperature. It draws minimal current from the fire alarm control panel and typically has an indicator LED that may flash periodically to confirm normal operation (check your specific base and panel documentation for LED behavior).
4.2 경보 조건
When the ambient temperature at the detector reaches or exceeds 135°F (57°C), the detector will activate. This activation sends a signal to the fire alarm control panel, initiating the alarm sequence (e.g., sounding alarms, notifying monitoring stations). The detector's LED will typically illuminate steadily to indicate its alarm state.
Upon an alarm, follow your facility's emergency procedures immediately. Do not attempt to reset the detector until the cause of the alarm has been identified and resolved.
5. 유지관리
Regular maintenance is essential to ensure the continued reliability and proper functioning of your heat detector.
5.1 정기 점검
- Visually inspect the detector monthly for any signs of damage, obstructions, or excessive dust accumulation.
- Ensure the detector's indicator LED is functioning as expected during normal operation.
5.2 청소
If dust or debris is visible, clean the exterior of the detector using a soft, dry cloth. Do not use cleaning sprays or solvents directly on the detector. For more thorough cleaning, consult a qualified fire alarm technician.
5.3 테스트
Heat detectors should be tested periodically by qualified personnel in accordance with NFPA 72 and local fire codes. Testing typically involves applying a controlled heat source to the detector to verify its activation at the rated temperature. Never use an open flame for testing.
6. 문제 해결
This section addresses common issues that may arise with the Simplex 4098-9733 Heat Detector. For complex problems, contact a qualified fire alarm technician.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Detector not responding to heat test | Incorrect wiring, faulty detector, insufficient heat applied, incompatible base. | Verify wiring connections. Ensure adequate heat is applied during testing. Check detector compatibility with base and panel. Replace detector if faulty. |
| 허위 경보 | Detector located near heat source (e.g., furnace, oven), environmental factors. | Relocate detector away from heat sources. Ensure proper ventilation. Consult installation guidelines for appropriate placement. |
| System trouble signal | Wiring fault, detector not seated correctly, power issue. | Check all wiring connections. Ensure detector is securely twisted onto its base. Verify power supply to the fire alarm control panel. |
7. 기술 사양
The following table outlines the technical specifications for the Simplex 4098-9733 Heat Detector:
| 사양 | 세부 사항 |
|---|---|
| 모델 번호 | 4098-9733 |
| 센서 유형 | Fixed Temperature Heat Detector |
| 활성화 온도 | 화씨 135도(섭씨 57도) |
| 경보 종류 | Audible (via control panel) |
| 작동 습도 | 최대 90% 비응축 |
| 전원 | Powered by Fire Alarm Control Panel (not battery operated) |
| 재료 | 금속, 플라스틱 |
| 색상 | 빨간색, 흰색 |
| 품목 무게 | 3.2 온스(대략) |
| 제품 치수 | 5 x 5 x 3인치(대략) |
| 한국어: | 643485652892 |
8. 보증 및 지원
8.1 보증 정보
Simplex products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official warranty statement provided with your purchase or contact Simplex customer service. Keep your proof of purchase for warranty claims.
8.2 기술 지원
For technical assistance, troubleshooting beyond this manual, or to inquire about service, please contact your authorized Simplex distributor or a qualified fire alarm service provider. Ensure you have the model number (4098-9733) and any relevant system information available when seeking support.
