소개
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Promag PCR-330M USB RFID Reader. The PCR-330M is a 13.56 MHz (MIFARE) keyboard-mode RFID reader designed for various applications requiring efficient and reliable card reading. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
그림 1: Promag PCR-330M USB RFID Reader. This image shows the top view of the white Promag PCR-330M RFID reader. It features a prominent oval-shaped blue button in the center, flanked by two small indicator lights (one grey, one green). A white USB cable extends from the top edge of the device. The "PROMAG" logo is subtly embossed near the top. The device has a sleek, slightly curved design with blue accents on its sides.
설정
Follow these steps to set up your Promag PCR-330M RFID Reader:
- 장치 포장 풀기: Carefully remove the PCR-330M reader from its packaging. Ensure all components are present.
- 컴퓨터에 연결: Plug the USB cable of the PCR-330M into an available USB port on your computer. The device is plug-and-play and typically does not require additional driver installation for standard keyboard-mode operation.
- 전원 켜기: The device will draw power directly from the USB port. The indicator lights on the reader will illuminate briefly upon successful connection.
- 테스트 기능: Open a text editor (e.g., Notepad, Word) or any application where text input is possible. Place a compatible 13.56 MHz RFID card (e.g., MIFARE) near or on the reader's sensing area. The card's ID should appear as typed text in the open application.
작동 지침
The Promag PCR-330M operates in keyboard emulation mode, meaning it sends card data as if it were typed on a keyboard.
- 카드 배치: Position the RFID card directly on the reader's surface or within close proximity (typically 0-5 cm) for optimal reading.
- 데이터 출력: Once a card is read, its unique identifier (UID) or programmed data will be outputted to the active cursor position in any open application.
- 표시등:
- 녹색 LED : Indicates successful card reading.
- Grey LED: Indicates power or standby status.
- Multiple Reads: To read the same card again, remove it from the sensing area and then place it back.
유지
To ensure the longevity and optimal performance of your PCR-330M reader, follow these maintenance guidelines:
- 청소: Use a soft, dry, lint-free cloth to clean the exterior of the device. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface.
- 저장: 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 손질: 기기를 떨어뜨리거나 강한 충격을 가하지 마십시오. 케이스를 열려고 시도하지 마십시오.asing, 그렇게 하면 보증이 무효화됩니다.
문제 해결
If you encounter issues with your Promag PCR-330M, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 컴퓨터가 장치를 인식하지 못합니다. |
|
|
| Cannot read RFID cards. |
|
|
| Card data appears incorrectly. |
|
|
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | PCR330M-00 |
| 작동 주파수 | 13.56MHz |
| 지원되는 카드 유형 | MIFARE compatible cards |
| 인터페이스 | USB (Keyboard-Mode) |
| 치수(폭x높이x깊이) | 6.5 x 2.31 x 10.01cm(2.56 x 0.91 x 3.94인치) |
| 무게 | 1.6kg(3.53파운드) |
| 전원 공급 장치 | USB 버스 전원 공급 |
| 제조업체 | Promag |
보증 정보
Promag products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official Promag web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
고객 지원
For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Promag customer support.
- 제조업체: Promag
- Web대지: www.promag.com.tw (Note: This is a general placeholder for a manufacturer's website. Please refer to your product packaging for the most accurate support contact information.)
- 이메일/전화: 공식 참조 website or product documentation for specific contact details.
