1. 서론
This manual provides essential instructions for the proper installation, operation, and maintenance of your PROFLO Amador PF9312 Toilet Tank. Please read this manual thoroughly before beginning installation or use to ensure safe and efficient performance. This product is a toilet tank only and requires a coordinating toilet bowl for complete installation.
Image 1.1: The PROFLO Amador PF9312 Toilet Tank. This image displays the white vitreous china toilet tank with its flush lever on the side.
2. 안전 정보
Observe all local plumbing and building codes during installation. Always wear appropriate personal protective equipment, such as safety glasses and gloves, when handling plumbing fixtures and tools. Ensure the water supply is turned off before beginning any installation or maintenance work. If you are unsure about any part of the installation process, consult a qualified plumber.
3. 패키지 내용
설치를 진행하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.
- PROFLO Amador PF9312 Toilet Tank (Vitreous China, White)
- Internal tank components (flush valve, fill valve, flush lever)
- Tank-to-bowl bolts and gasket (typically included with tank)
메모: A toilet bowl, toilet seat, and wax ring/flange bolts are sold separately and are required for a complete toilet installation.
4. 설정 및 설치
4.1 준비
- 화장실의 급수 밸브를 잠그세요.
- Remove any existing toilet tank and clean the area around the toilet bowl's mounting surface.
- Ensure the rough-in dimension (distance from the wall to the center of the drain pipe) is 12 inches for proper fitment.
4.2 탱크 설치
- Place the tank-to-bowl gasket onto the flush valve opening at the bottom of the toilet tank.
- Carefully align the tank with the bolt holes on the toilet bowl.
- Insert the tank-to-bowl bolts through the tank and bowl holes. Secure with washers and nuts from underneath the bowl, tightening evenly until the tank is stable and does not rock. Avoid overtightening to prevent cracking the vitreous china.
- Connect the water supply line to the fill valve shank at the bottom of the tank. Hand-tighten, then use a wrench for a final quarter-turn.
- Turn on the water supply slowly and check for leaks. Allow the tank to fill.
Image 4.1: The PROFLO Amador PF9312 Toilet Tank shown installed on a compatible toilet bowl. Note that the bowl and seat are separate components.
5. 사용 설명서
To operate the toilet, simply press down on the flush lever located on the side of the tank. This action lifts the flush valve, allowing water to flow from the tank into the toilet bowl, initiating the flush cycle. Release the lever once the flush is complete. The tank will then refill automatically.
6. 유지관리
6.1 청소
Clean the exterior of the toilet tank with a soft cloth and mild, non-abrasive cleaning agents. Avoid harsh chemicals or abrasive scrubbers, as these can damage the vitreous china finish. For internal components, periodic inspection for mineral buildup is recommended. Use a toilet bowl cleaner specifically designed for internal tank use if necessary, following the product's instructions.
6.2 구성품 검사
Periodically inspect the fill valve, flush valve, and flush lever for proper function and wear. Ensure the flapper or seal is seating correctly to prevent leaks. Adjust the water level if needed, typically by adjusting the fill valve float mechanism according to the manufacturer's instructions for the specific fill valve model.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Tank does not fill or fills slowly | Water supply turned off; clogged fill valve; kinked supply line. | Ensure water supply is on; clean or replace fill valve; straighten supply line. |
| Tank continuously runs or leaks | Flapper not sealing properly; fill valve not shutting off; water level too high. | Inspect/replace flapper; adjust or replace fill valve; adjust water level. |
| 약한 물내림 | Low water level in tank; clogged siphon jet or rim holes in bowl (bowl issue). | Adjust water level to correct height; clean bowl's siphon jet and rim holes (refer to bowl manual). |
For issues not listed here or if troubleshooting steps do not resolve the problem, contact PROFLO customer support or a qualified plumber.
8. 사양
- 모델: 피에프9312
- 재료: 중국 유리
- 색상: 하얀색
- 품목 무게: 31.8파운드
- 제품 크기: 16.6 x 9.6 x 14.75인치(길이 x 너비 x 높이)
- 설치 방법: Floor Mounted (tank to bowl)
- 대략적인 치수: 12인치
- 포함된 구성 요소: Toilet Tank Only
9. 보증 및 지원
PROFLO products are factory tested to ensure flawless function. This PROFLO toilet tank is covered under PROFLO's Fixtures warranty for one year after installation. For specific warranty details, claims, or technical support, please refer to the official PROFLO web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증을 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
PROFLO Customer Support: 방문해주세요 www.proflo.com 연락처 및 추가 지원이 필요하시면 문의하십시오.
