소개
The Dish Network 20.1 IR Remote Control is designed to operate your Dish Network receiver and a television. This remote functions in Infrared (IR) mode, requiring a direct line of sight between the remote and the device being controlled. It is an upgraded version of the 20.0 remote, featuring expanded codes for compatibility with a wider range of newer televisions.
주요 특징
- Operates Dish Network receivers in IR mode.
- Compatible with various television models.
- Capable of learning codes from other IR remotes.
- Requires four AAA batteries for operation.
설정
1. 배터리 설치
The Dish Network 20.1 remote control requires four (4) AAA batteries.
- 리모콘 뒷면에 있는 배터리함 덮개를 찾으세요.
- 덮개를 아래로 밀어서 들어 올리세요.
- AAA 배터리 4개를 넣을 때, 배터리함 안쪽에 표시된 극성(+와 -)을 정확히 맞춰주세요.
- 배터리 칸 덮개를 제자리에 다시 밀어 넣어 딸깍 소리가 날 때까지 단단히 고정합니다.
이미지: 앞면 view of the Dish Network 20.1 IR Remote Control, showing button layout.
2. Pairing with Dish Network Receiver (IR Mode)
The 20.1 remote is designed to control Dish Network receivers in IR mode. For newer receivers like the Hopper and Joey, which may have originally shipped with a UHF remote, you might need to configure the receiver to accept IR commands. Consult your receiver's manual for specific instructions on enabling IR mode.
Typically, the remote will control the Dish receiver automatically once batteries are installed and the receiver is set to IR mode.
3. Programming for Television Control
To control your television's power, volume, and input functions, you will need to program the remote with your TV's code.
- 텔레비전을 켜십시오.
- 를 누르고 계세요 TV mode button on the remote until all four mode buttons (SAT, TV, DVD, AUX) illuminate.
- 릴리스하다 TV 버튼. TV 버튼에 불이 계속 켜져 있어야 합니다.
- Enter the 3-digit TV code for your television brand. Refer to the code list provided with your remote or search online for "Dish Network 20.1 TV codes" for your specific TV brand.
- 코드를 입력한 후에는 TV button should flash three times and then turn off, indicating successful programming. If it does not flash, repeat the process.
- 리모컨을 테스트하려면 버튼을 누르세요. 힘 button to turn off your TV. If it works, the programming is complete. If not, try the next code for your TV brand.
Image: Dish Network 20.1 Remote Control shown alongside a sheet of programming codes and room labels.
작동 지침
기본 기능
- 힘: 를 누르세요 힘 button to turn your Dish receiver and programmed TV on or off.
- 볼륨 +/-: Adjusts the volume of your programmed television.
- 채널 +/-: Changes the channel on your Dish receiver.
- 음소거: Mutes or unmutes the sound on your programmed television.
- 선택하다: 메뉴에서 선택한 내용을 확인합니다.
- 가이드: 프로그램 가이드를 표시합니다.
- 메뉴: Accesses the main menu of your Dish receiver.
이미지: 클로즈업 view of the central buttons on the Dish Network 20.1 Remote Control, highlighting navigation and function keys.
고급 기능
- DVR : Accesses your Digital Video Recorder functions.
- PLAY/PAUSE, STOP, RECORD, FWD, BACK, SKIP BACK, SKIP FWD: Control playback of recorded content.
- 정보: 프로그램 정보를 표시합니다.
- 찾다: Initiates content search.
- VIEW 생방송 TV: Returns to live television view주고받음.
- PIP(Picture-in-Picture): Controls Picture-in-Picture functionality, if supported by your receiver/TV.
- 교환: Swaps between two active channels or PIP windows.
유지
배터리 교체
Replace batteries when the remote's response becomes sluggish or the indicator lights do not illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries, or different types of batteries.
청소
리모컨을 청소할 때는 부드럽고 마른 천으로 살살 닦아주세요. 액체 세제나 연마성 소재는 리모컨 표면이나 내부 부품을 손상시킬 수 있으므로 사용하지 마십시오.
문제 해결
원격 응답 없음
- Ensure there is a clear line of sight between the remote and the Dish receiver/TV. Obstructions can block the infrared signal.
- 배터리를 점검하십시오. 오래되었거나 방전된 배터리는 교체하십시오.
- Verify that the correct mode button (SAT for receiver, TV for television) is selected before pressing a command.
- If controlling a Dish receiver, ensure the receiver is configured for IR mode, especially if it originally came with a UHF remote.
TV Not Programming
- Double-check the TV code entered. Ensure it matches your television brand.
- Try all available codes for your TV brand from the provided list.
- 당신이 잡고 있는지 확인하십시오 TV mode button long enough for all four mode buttons to light up before releasing.
- 만약 TV button does not flash three times after entering the code, the code was not accepted. Repeat the programming steps carefully.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 20.1 |
| 상표 | 접시 |
| 의사소통 | 적외선 (IR) |
| 전원 | AAA 배터리 4개(필수) |
| 제품 치수 | 10.2 x 1.1 x 2.5 인치 |
| 품목 무게 | 4.5 온스 |
| 호환 장치 | Dish Network Receivers, Televisions |
| 특징 | Ergonomic design, Learning capability |
보증 및 지원
보증 정보 및 기술 지원에 대해서는 Dish Network 공식 웹사이트를 참조하십시오. website or contact Dish Network customer service directly.
법적 고지사항: This product is shipped to continental U.S. only.
