AMS F5266/18

AMS F5266/18 모던 라디오 펜듈럼 벽시계 사용 설명서

Model: F5266/18 | Brand: AMS

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your AMS F5266/18 Modern Radio Pendulum Wall Clock. Please read this guide thoroughly to ensure proper use and longevity of your clock.

제품 끝view

The AMS F5266/18 is a radio-controlled pendulum wall clock featuring a modern design with a beech wood back panel and a golden metallic face. Its radio function ensures accurate timekeeping by automatically synchronizing with a time signal.

AMS F5266/18 Modern Radio Pendulum Wall Clock

Figure 1: AMS F5266/18 Modern Radio Pendulum Wall Clock. This image displays the clock's design, including its light beech wood back panel, golden metallic face with black Arabic numerals, and a matching golden pendulum.

주요 특징:

설치 지침

  1. 짐 풀기: 시계를 포장에서 조심스럽게 꺼내십시오. 손상된 부분이 있는지 확인하십시오.
  2. 배터리 설치: Locate the battery compartment on the back of the clock. Insert one (1) AA battery, ensuring correct polarity (+/-).
  3. 진자 설치: Gently attach the pendulum to its designated hook or slot, typically located below the clock mechanism. Ensure it hangs freely.
  4. 설치: Choose a suitable wall location. The clock should be hung securely using appropriate wall anchors and screws (not included). Ensure the clock is level for optimal pendulum operation.
  5. Initial Time Synchronization: After battery installation, the clock will automatically search for the radio time signal. This process may take several minutes. Place the clock near a window or in an area with good signal reception for faster synchronization. The hands will move to 12:00 and then adjust to the correct time once the signal is received.

작동 지침

Your AMS F5266/18 clock is designed for automatic operation once set up correctly.

유지

문제 해결

문제가능한 원인해결책
Clock does not start or stops.배터리가 방전되었거나 잘못 설치되었습니다.배터리 극성을 확인하세요. 새 AA 배터리로 교체하세요.
Clock does not set correct time.라디오 신호 수신 상태가 좋지 않습니다.Move the clock to a location with better signal reception, ideally near a window. Allow several minutes for synchronization.
진자는 흔들리지 않습니다.Pendulum not properly installed or obstructed.Ensure the pendulum is correctly hooked and swings freely without touching the clock casing. Gently initiate the swing.
Clock makes a subtle ticking sound.정상적인 기계 작동.This is a characteristic of the clock's movement and is not a defect.

명세서

보증 및 지원

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. You may also visit the official AMS web추가 지원은 사이트를 참조하세요.

관련 문서 - F5266/18

사전view AMS 5898/5893 전파 수신 시계 사용 설명서
AMS 5898 및 AMS 5893 전파 시계의 설치 및 작동에 대한 자세한 지침입니다. 여기에는 시간 설정, 알람 기능, 온도 표시 및 유지 관리가 포함됩니다.
사전view AMS 벽시계 작동 설명서
여러 언어로 작성된 AMS 벽시계 작동 설명서에는 배터리 설치, 교체, 일반적인 사용 방법이 설명되어 있습니다.
사전view ams AS5600L 어댑터 보드 평가 키트 설명서
이 설명서는 ams AS5600L-WL_EK_AB 어댑터 보드에 대한 포괄적인 정보를 제공합니다. 여기에는 키트 구성품, 보드 설명, 장착 지침, 핀 배치 세부 정보, I2C 모드 작동, 하드웨어 회로도, PCB 레이아웃 및 주문 정보가 포함됩니다.
사전view ams AS5048 14비트 회전 위치 센서 사용 설명서
이 사용 설명서는 디지털 각도 및 PWM 출력을 갖춘 14비트 회전 위치 센서인 ams AS5048에 대한 자세한 정보를 제공합니다. AS5048 어댑터 보드, 장착, 핀아웃, 작동 방식(SPI, 데이지 체인), 펌웨어 코딩(예:amp파일 및 하드웨어 회로도. 이 센서를 시스템에 통합하는 엔지니어에게 필수적입니다.
사전view ams AS5048 어댑터 보드 평가 키트 설명서
이 설명서는 AS5048 자기 위치 센서 평가 키트인 ams AS5048 어댑터 보드(AS5048-EK-AB)에 대한 자세한 내용을 다룹니다. 하드웨어, 작동 모드(SPI, I2C), 소프트웨어 등을 포함합니다.amples 및 ams AG의 연락처 정보입니다.
사전view AMS 시계 작동 지침 및 배터리 교체 가이드
AMS 시계의 배터리를 작동하고 교체하는 방법에 대한 지침(다국어 안내 포함)입니다.