1. 서론
This manual provides essential instructions for the installation, operation, and maintenance of your Samsung M470T5663QZ3-CF7 2GB DDR2 Laptop RAM Memory module. This module is designed to enhance the performance of compatible laptop computers by increasing their available system memory.
Please read these instructions carefully before proceeding with installation to ensure proper function and to avoid potential damage to your system or the memory module.
2. 설정 및 설치
Installing the Samsung M470T5663QZ3-CF7 memory module requires opening your laptop. Exercise caution and follow these steps:
- 안전이 최우선입니다. Before beginning, power off your laptop completely and disconnect it from the power adapter. Remove the battery.
- 정전기 방전: To prevent damage from static electricity, touch a grounded metal object (like an unpainted metal part of your computer chassis) before handling the memory module. Consider using an anti-static wrist strap.
- 액세스 메모리 슬롯: Refer to your laptop's specific service manual for instructions on how to access the memory compartment. This usually involves removing a panel on the bottom of the laptop.
- 메모리 슬롯 위치 찾기: Identify the available SODIMM memory slots. Your laptop may have one or two slots.
- Remove Existing Module (if applicable): If replacing an existing module, gently push outwards on the metal clips on both sides of the module. The module will pop up at an angle. You can then pull it out carefully.
- 새 모듈 삽입: Hold the Samsung M470T5663QZ3-CF7 module by its edges, aligning the notch on the module with the key in the memory slot. Insert the module firmly into the slot at a 45-degree angle.
- 보안 모듈: Once fully seated, push the module down until the metal clips on both sides snap into place, securing the module horizontally.
- 재조립: Replace the memory compartment cover and the battery. Reconnect the power adapter.

Image: Samsung M470T5663QZ3-CF7 2GB DDR2 Laptop RAM Memory module. This image shows the physical appearance of the memory module, highlighting its compact form factor and pin configuration.
3. 운영
Once installed, the Samsung M470T5663QZ3-CF7 memory module operates automatically with your laptop's operating system. No specific software or drivers are required for its basic function.
설치 확인:
After installation, power on your laptop. You can verify that the new memory is recognized by checking your system's information:
- 윈도우: Right-click on "This PC" or "My Computer," select "Properties." The "Installed RAM" or "Memory" section will display the total recognized memory.
- 맥 OS : Click the Apple menu, select "About This Mac." The "Memory" tab will show the installed RAM.
- 리눅스: 터미널을 열고 다음을 입력하세요.
free -horcat /proc/meminfo.
The system should display the combined total of all installed memory modules.
4. 유지관리
The Samsung M470T5663QZ3-CF7 memory module is a solid-state component and requires minimal maintenance. To ensure its longevity and reliable performance:
- 조심스럽게 다루십시오: Always hold the module by its edges to avoid touching the gold contacts or components.
- 깨끗하게 유지하십시오: Ensure the memory compartment of your laptop remains free of dust and debris. Use compressed air if necessary, but avoid direct contact with the module.
- 극한의 환경을 피하세요: Do not expose the module to extreme temperatures, humidity, or direct sunlight.
- 정전기 방지: When handling the module outside of the laptop, store it in an anti-static bag.
5. 문제 해결
메모리 모듈 설치 후 문제가 발생하면 다음 문제 해결 단계를 고려하십시오.
- 시스템 부팅 안 됨 / 검은 화면:
- 메모리 모듈이 슬롯에 완전히 장착되었는지 확인하십시오. 모듈을 제거한 후 단단히 다시 삽입하십시오.
- Verify that the module's notch aligns correctly with the slot's key.
- If multiple modules are installed, try booting with only the new module, or with only the original module if you are replacing one.
- Check your laptop's compatibility. This module is DDR2 SODIMM. Installing an incompatible type (e.g., DDR3, DDR4) will prevent booting.
- 잘못된 메모리 용량이 감지되었습니다:
- Re-seat the module to ensure good contact.
- Clean the gold contacts on the module with a soft, lint-free cloth and isopropyl alcohol if necessary.
- Check your laptop's BIOS/UEFI settings to ensure memory detection is enabled and up-to-date.
- 시스템 불안정/충돌:
- This could indicate a faulty module or incompatibility. Try running a memory diagnostic tool (e.g., Windows Memory Diagnostic, MemTest86).
- Ensure your laptop's BIOS/UEFI is updated to the latest version, as this can improve memory compatibility.
문제가 지속될 경우 노트북 제조업체의 지원 자료 또는 자격을 갖춘 기술자에게 문의하십시오.
6. 사양
The following are the technical specifications for the Samsung M470T5663QZ3-CF7 2GB DDR2 Laptop RAM Memory module:
| 특징 | 사양 |
|---|---|
| 상표 | 삼성 |
| 모델 번호 | M470T5663QZ3-CF7 |
| RAM 용량 | 2GB (XNUMX기가바이트) |
| 램 종류 | DDR2 SD램 |
| 메모리 속도 | 800MHz(PC2-6400) |
| 폼 팩터 | 200-배터리 SODIMM |
| 권tage | 1.8 볼트 |
| CAS 대기 시간 | CL6 |
| 계급 | Dual Rank x8 |
| 제품 치수 | 4 x 0.5 x 1.9 인치 |
| 품목 무게 | 0.01 온스 |
7. 보증 및 지원
For warranty information and technical support regarding your Samsung M470T5663QZ3-CF7 memory module, please refer to the official Samsung support channels or the retailer from whom the product was purchased.
중요 참고 사항: The product's legal disclaimer states "All sales are final." Please verify warranty terms with your specific vendor at the time of purchase.
For general inquiries or further assistance, visit the official Samsung web사이트 또는 고객 서비스 부서에 문의하십시오.





