Acme Sunburst Queen Canopy Bed Headboard and Footboard Instruction Manual

1. 제품 오버view

The Acme Sunburst Queen Canopy Bed Headboard and Footboard is a decorative metal component designed to attach to a standard queen-size bed frame. This product includes the headboard, footboard, and canopy posts with a sandy black finish and a distinctive sunburst design. Please note that this product consists only of the headboard, footboard, and canopy posts; a separate queen-size bed frame with side rails, mattress, and related accessories are required and sold separately.

Image 1: The Acme Sunburst Queen Canopy Bed Headboard and Footboard, shown assembled with a mattress and bedding (not included). This image illustrates the complete aesthetic when combined with a compatible bed frame.

2. 안전 정보

• 조립 및 사용 전에 모든 지침을 주의 깊게 읽으십시오.
• 모든 작은 부품과 포장재는 어린이의 손이 닿지 않는 곳에 보관하세요.
• 긁힘을 방지하려면 부드럽고 깨끗한 표면에 제품을 조립하세요.
• 사용 전에 모든 볼트와 나사가 단단히 조여졌는지 확인하십시오. 정기적으로 점검하고 필요하면 다시 조이십시오.
• Do not stand on the bed frame or canopy structure.
• 이 제품은 실내에서만 사용하도록 설계되었습니다.
• Two adults are recommended for assembly to ensure safety and ease of installation.

3. 패키지 내용

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Acme customer support.

• 헤드보드(1)
• 풋보드(1)
• 캐노피 기둥 (4)
• Canopy Rails (4)
• Connecting Hardware (bolts, washers, nuts, clips for attaching to a standard bed frame)

Note: A queen-size bed frame with side rails, mattress, and bedding are NOT included with this product and must be purchased separately.

4. 조립 설명서

Assembly requires two people. Please follow these steps carefully.

1. 부품 풀기 및 식별: 포장에서 모든 구성품을 조심스럽게 꺼내십시오. 깨끗하고 부드러운 표면에 구성품들을 펼쳐 놓으십시오. 부품 목록을 참조하여 각 구성품을 확인하십시오.
2. Attach Headboard and Footboard to Existing Bed Frame: Position your existing queen-size bed frame. Align the headboard with the designated attachment points on your bed frame's head end. Use the provided bolts, washers, and nuts to securely fasten the headboard to the bed frame. Repeat this process for the footboard at the foot end of your bed frame. Ensure all connections are tight.
3. 캐노피 기둥 조립: Insert the bottom sections of the four canopy posts into the designated receivers on the headboard and footboard. Ensure they are firmly seated.
4. 캐노피 레일을 설치하세요: Connect the four canopy rails to the top sections of the canopy posts. Secure them using the provided hardware. Ensure all connections are stable and level.
5. 최종 확인: Once all components are assembled, gently shake the entire structure to ensure stability. Re-tighten any loose connections.

이미지 2: 자세한 view of the sunburst design on the headboard and footboard, highlighting the sandy black finish and decorative elements.

5. 관리 및 유지 보수

• 청소: 금속 표면을 부드러운 천으로 닦으십시오.amp 천으로 닦아주세요. 마감을 손상시킬 수 있는 연마성 세제, 강한 화학 물질 또는 광택제 사용을 피하세요.
• 가루 살포: 먼지가 쌓이는 것을 방지하기 위해 마른 부드러운 천으로 액자를 정기적으로 닦아주세요.
• 하드웨어 검사: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
• 습기를 피하세요: Keep the bed frame away from excessive moisture or humidity to prevent rust or damage to the finish.

6. 문제 해결

• 불안정성/흔들림: Ensure all bolts and connections are fully tightened. Verify that the headboard and footboard are properly attached to a stable queen-size bed frame. Uneven flooring can also contribute to instability; consider using furniture pads or shims.
• 잃어버린 부분들: If any parts are missing upon unpacking, do not proceed with assembly. Contact Acme customer support immediately for assistance.
• 조립 난이도: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. Sometimes, parts may appear similar but have subtle differences. If instructions are unclear, refer to diagrams or contact support.

7. 사양

8. 보증 및 지원

For warranty information, missing parts, or technical support, please contact Acme Furniture directly. Refer to your purchase documentation for specific warranty terms and contact details. Keep your proof of purchase for any warranty claims.