1. 제품 오버view
The Zurn Z812B4-XL AquaSpec Gooseneck Faucet is a durable and efficient fixture designed for commercial washrooms. This faucet features a 4-inch centerset design with a 5 3/8-inch gooseneck spout and 4-inch wrist blade handles. Constructed from lead-free cast brass with a polished chrome finish, it is built for longevity and compliance with water safety standards.
주요 특징은 다음과 같습니다.
- 모델: Z812B4-XL
- 설계: 4-inch centerset, deck mount
- 주둥이: 5 3/8-inch stationary or swinging gooseneck
- 에어레이터: Standard 2.2 GPM pressure-compensating, with options for 0.35 gpm to 2.2 gpm
- 핸들: Two 4-inch wrist blade handles, vandal-resistant and color-coded (hot/cold)
- 재료: Lead-free cast brass body
- 마치다: Polished chrome-plated
- 탄약통: Heavy-duty quarter-turn ceramic disc
- 규정 준수: ADA compliant, complies with Safe Water Drinking Act
그림 1: 메인 view of the Zurn Z812B4-XL AquaSpec Gooseneck Faucet with chrome finish and wrist blade handles.
2. 설정 및 설치
2.1. 시작하기 전에
- Ensure all necessary components are present: faucet body, handles, aerator, mounting hardware, and water supply lines.
- 설치 구역으로 공급되는 주요 물의 공급을 차단합니다.
- Clear the work area and ensure adequate lighting.
- Gather necessary tools: adjustable wrench, plumber's putty or silicone sealant, screwdriver, flashlight, and safety glasses.
2.2. 설치 단계
- Prepare the Sink/Deck: Clean the faucet mounting holes on the sink or countertop. Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet body where it will contact the sink.
- 수도꼭지 장착: Insert the faucet body through the mounting holes from above the sink. From underneath, secure the faucet using the provided washers and mounting nuts. Hand-tighten first, then use an adjustable wrench to snug them, ensuring the faucet is straight. Do not overtighten.
- 급수관 연결: Attach the hot and cold water supply lines to the corresponding inlets on the faucet body. Ensure a tight, leak-free connection. Connect the other ends of the supply lines to the hot and cold water shut-off valves.
- 핸들 설치: Place the wrist blade handles onto their respective stems. Secure them with the provided screws, ensuring they are properly aligned and functional.
- Install Aerator: Ensure the aerator is securely threaded onto the end of the gooseneck spout.
- 누출 테스트: Slowly turn on the main water supply. Check all connections for leaks. Run both hot and cold water through the faucet for a few minutes to flush out any debris.
그림 2: 전면 view of the faucet, illustrating the wrist blade handles and gooseneck spout for connection reference.
3. 사용 설명서
The Zurn Z812B4-XL faucet is designed for simple and reliable operation.
- 켜기/끄기: Rotate the wrist blade handles to turn the water on or off. The left handle typically controls hot water (indicated by a red color code), and the right handle controls cold water (indicated by a blue color code).
- 온도 조정: Mix hot and cold water by adjusting the rotation of both handles simultaneously until the desired temperature is achieved.
- 물의 흐름: The faucet is equipped with a 2.2 GPM pressure-compensating aerator, ensuring a consistent flow rate regardless of water pressure fluctuations.
4. 유지관리
Regular maintenance will ensure the longevity and optimal performance of your Zurn Z812B4-XL faucet.
4.1. 수도꼭지 청소
- 크롬 도금 부분은 부드러운 천과 순한 비누와 물을 사용하여 정기적으로 닦아주세요.
- 연마성 세척제, 강한 화학 물질 또는 연마 패드는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 깨끗한 물로 깨끗이 헹구고 부드러운 천으로 말려 물 얼룩이 생기지 않도록 하세요.
4.2. 폭기기 유지보수
- If water flow decreases or becomes erratic, the aerator may be clogged with debris.
- Unscrew the aerator from the spout by hand or with an aerator wrench.
- Disassemble the aerator and rinse all components under running water. Use a small brush to remove any mineral deposits or particles.
- 에어레이터를 다시 조립하고 꼭지에 다시 나사로 고정합니다.
4.3. 카트리지 유지보수
The ceramic disc cartridge is designed for up to one million cycles and is covered by a limited lifetime warranty. In the event of a persistent drip or leak from the spout, the cartridge may need inspection or replacement. Consult a qualified plumber or Zurn customer support for assistance.
5. 문제 해결
일반적인 문제와 잠재적인 해결책은 아래 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물의 흐름이 적다 | 막힌 통기기, 부분적으로 닫힌 차단 밸브, 급수관에 이물질이 있음. | 에어레이터를 청소하십시오(4.2절 참조). 차단 밸브가 완전히 열려 있는지 확인하십시오. 급수관을 세척하십시오. |
| Faucet drips from spout | Worn or damaged ceramic disc cartridge. | Contact Zurn customer support or a qualified plumber for cartridge inspection/replacement. |
| Leak at base of faucet | 장착 너트가 헐거워졌거나, 실런트 도포가 부적절한 경우. | Tighten mounting nuts (do not overtighten). Reapply plumber's putty or silicone sealant if necessary. |
| Leak at handle base | Loose packing nut or worn O-rings within the handle assembly. | Tighten packing nut. If leak persists, O-rings or cartridge may need replacement. Consult a professional. |
6. 사양
| 모델 번호 | Z812B4-XL |
| 상표 | 주른 |
| 재료 | Lead-free Cast Brass |
| 마무리 유형 | 광택 크롬 |
| 장착 유형 | 데크 마운트 |
| 핸들 수 | 2 (Wrist Blade) |
| 홀 카운트 | 3 |
| 주둥이 도달 | 5 3/8 인치 |
| 유량 | 2.2 GPM (standard), adjustable options from 0.35 GPM to 2.2 GPM |
| 카트리지 타입 | Quarter-turn Ceramic Disc |
| 특별 기능 | Lead Free, Water Saving, ADA Compliant, Vandal-Resistant |
그림 3: 측면 view of the faucet, showing the gooseneck spout and handle profile.
7. 보증 및 지원
7.1. 보증 정보
- Limited Faucet Warranty: The Zurn Z812B4-XL faucet is covered by a 3-year limited warranty.
- Ceramic Disc Cartridge Warranty: The ceramic disc cartridge is backed by a limited lifetime warranty, reflecting its durability and reliability.
보증 청구를 위해 구매 증명서를 보관하십시오.
7.2. 고객 지원
For technical assistance, warranty inquiries, or replacement parts, please contact Zurn customer support. Refer to the official Zurn web최신 연락처 정보는 해당 사이트나 제품 포장에서 확인하세요.
온라인 리소스: www.zurn.com