Estes 2435 3 Bandits 모델 로켓 키트 사용 설명서

1. 서론

This instruction manual provides detailed guidance for assembling, preparing, and launching your Estes 2435 3 Bandits Model Rocket Kit. Designed for beginners aged 10 and up (with adult supervision recommended for those under 12), this kit allows you to build and launch three mini-engine-powered rockets. Please read all instructions carefully before beginning assembly or launch operations to ensure a safe and successful experience.

2. 포함 사항

Your Estes 2435 3 Bandits Model Rocket Kit includes the following components for three rockets:

• 3 Rocket Kits (including nose cones, body tubes, fins, and recovery parachutes)
• Design Decals
• 지침서

메모: Additional items required for assembly and launch are sold separately. Refer to Section 3 and 4 for details.

그림 2.1: Included Components and Dimensions. Each rocket measures approximately 10.8-11.1 inches in length and 0.74 inches in diameter, weighing 0.6-0.71 oz.

3. 조립 설명서

The 3 Bandits rockets are designed for quick and easy assembly, with an estimated time of 10 minutes per rocket. Follow the detailed instructions provided in your kit for specific steps. General tools and materials required for assembly include:

• 가위
• Carpenter's Glue
• 플라스틱 시멘트

Ensure all parts are securely attached and dry before proceeding to launch preparation.

그림 3.1: Tools and Materials for Assembly.

4. Preparing for Launch

Before launching your Estes 3 Bandits rockets, you will need several additional items, sold separately:

• Estes Model Rocket Engines (e.g., 1/2A3-4T, A3-4T, A10-3T)
• Starters (Igniters)
• 회복 충전재
• Estes Porta-Pad II Launch Pad
• Estes Electron Beam Launch Controller
• 4 high-quality 1.5-volt AA alkaline batteries (for launch controller)

4.1. Engine Selection

Estes model rocket engines are assigned a letter indicating their power level. For beginner rockets like the 3 Bandits, engines starting with the letter 'A' (e.g., 1/2A3-4T, A3-4T, A10-3T) are generally the best choice. Always refer to your rocket's specific instructions for recommended engine types to ensure optimal performance and safety.

4.2. Recovery Wadding

Recovery wadding is crucial for protecting the recovery parachute from the hot ejection charge of the engine. Insert several sheets of wadding into the body tube above the engine before packing the parachute. Use new wadding for each flight.

5. Launch Procedure

Always conduct launches in an open area, away from buildings, power lines, and dry brush. Ensure weather conditions are suitable (low wind, clear skies).

1. Set up Launch Pad: Assemble the Estes Porta-Pad II Launch Pad according to its instructions. Place it on a flat, stable surface.
2. Prepare Rocket: Insert the prepared engine with a starter and recovery wadding into the rocket. Carefully fold and insert the parachute.
3. Place Rocket on Pad: Slide the rocket onto the launch rod of the Porta-Pad II.
4. Connect Launch Controller: Connect the lead clips from the Electron Beam Launch Controller to the starter wires on the rocket. Ensure a secure connection.
5. Clear Launch Area: Ensure all spectators and personnel are at least 15 feet away from the launch pad.
6. Insert Safety Key: 안전 키를 발사 컨트롤러에 삽입하세요.
7. Initiate Countdown: Begin a verbal countdown (e.g., "5, 4, 3, 2, 1, Launch!").
8. 시작하다: Press and hold the launch button until the rocket ignites and lifts off.
9. 회복: Observe the rocket's flight and recovery. Retrieve the rocket for future launches.

그림 5.1: Estes 3 Bandits Launch Set, showcasing the rockets.

6. 유지 관리 및 보관

• After each flight, inspect your rocket for any damage to the fins, nose cone, or body tube. Repair as needed with appropriate adhesives.
• Ensure the recovery parachute is clean and free of tears.
• Store rockets and engines in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep launch controllers and pads clean and free of debris.

7. 문제 해결

• Rocket Fails to Launch:
  • Check battery level in launch controller.
  • Ensure starter wires are securely connected to the lead clips.
  • 안전 키가 완전히 삽입되었는지 확인하십시오.
  • Inspect the starter for damage.
• Parachute Fails to Deploy:
  • Ensure sufficient recovery wadding was used to protect the parachute.
  • Check for obstructions in the body tube.
  • Verify the engine's ejection charge fired correctly.
• Erratic Flight Path:
  • Ensure fins are securely attached and aligned.
  • Verify the launch rod is straight and the rocket slides freely.
  • Check for proper engine selection for the rocket model.

8. 안전 지침

Model rocketry is a safe and enjoyable hobby when proper safety procedures are followed. Always adhere to the National Association of Rocketry (NAR) Model Rocket Safety Code. Key safety points include:

• 성인 감독: Children under 12 years of age should always be supervised by an adult.
• Launch Site: Use a large, open area free from obstacles, dry vegetation, and people.
• 날씨 조건: Do not launch in high winds, during thunderstorms, or near clouds.
• 안전 거리: Maintain a safe distance of at least 15 feet from the launch pad during countdown and launch.
• Engine Use: Only use Estes-approved model rocket engines for your specific rocket model.
• 회복: Always use recovery wadding and a parachute to ensure safe descent.
• Igniter Safety: Never attempt to launch a rocket with a damaged or improperly installed igniter.

9. 사양

그림 9.1: 기술 사양view.

10. 보증 및 지원

For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official Estes web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

Visit the Estes Store on Amazon