Estes 302320

Estes Launch Lug Pack Instruction Manual

모델: 302320

소개

This manual provides essential information for the proper use and installation of the Estes Launch Lug Pack. These components are designed to ensure vertical stability for model rockets during liftoff when used with compatible launch pad rods.

안전 정보

WARNING: This product is not a toy. Recommended for ages 14 and older.

Always follow all safety guidelines provided with your model rocket kit and launch system. Ensure proper adult supervision for users under 18 years of age.

제품 끝view

The Estes Launch Lug Pack (Model 302320) contains a variety of launch lugs designed for different model rocket sizes. These lugs are small, hollow tubes that slide over a launch rod, guiding the rocket during the initial phase of flight.

Image of Estes Launch Lug Pack showing various sizes of white plastic tubes.

Figure 1: Contents of the Estes Launch Lug Pack. The image displays multiple white plastic tubes of different diameters, which are the launch lugs.

팩에는 다음이 포함됩니다.

  • Eight (8) launch lugs with 1/8-inch diameter.
  • Four (4) launch lugs with 3/16-inch diameter.
  • Two (2) launch lugs with 1/4-inch diameter.

설정 및 설치

  1. Select Appropriate Lug Size: Choose a launch lug that matches the diameter of your launch rod. The lug should slide freely over the rod without excessive play.
  2. 배치 결정: Launch lugs are typically attached to the rocket body tube. Most rocket kits provide specific locations for lug placement. Generally, two lugs are used: one near the top of the rocket and one near the bottom, ensuring stable guidance.
  3. 부착 방법:
    • 점착제: Apply a suitable model rocket adhesive (e.g., plastic cement, white glue, or epoxy) to the contact surface of the lug and the rocket body. Ensure a strong bond.
    • Tape (Temporary/Light Models): For very light models or temporary setups, strong adhesive tape can be used to secure the lugs. However, adhesive is generally recommended for permanent attachment.
  4. 경화 시간: Allow sufficient time for the adhesive to cure completely before handling or launching the rocket. Refer to the adhesive manufacturer's instructions for specific curing times.
  5. 테스트 적합성: Before final assembly, slide the chosen launch lug onto your launch rod to confirm a smooth fit.

작동 원리

During a model rocket launch, the launch lugs serve as guides. The launch rod passes through the lugs, keeping the rocket aligned vertically until it achieves sufficient speed for its fins to provide aerodynamic stability. This prevents the rocket from veering off course immediately after ignition.

Ensure the launch rod is clean and free of obstructions to allow the lugs to slide smoothly during liftoff.

유지

  • 점검: Before each launch, inspect the launch lugs for any signs of damage, cracks, or loose attachment. Replace damaged lugs immediately.
  • 청소: Keep the lugs clean and free of debris, dirt, or adhesive residue that could impede smooth movement on the launch rod.
  • 저장: Store unused launch lugs in a cool, dry place away from direct sunlight to prevent material degradation.

문제 해결

  • Lug does not slide smoothly on launch rod:
    • Ensure the correct lug diameter is selected for the launch rod.
    • Check for debris or adhesive residue inside the lug or on the rod. Clean as necessary.
    • Inspect the lug for deformities. Replace if damaged.
  • Lug detaches during launch:
    • Verify that a strong, appropriate adhesive was used for attachment.
    • Ensure sufficient curing time was allowed for the adhesive.
    • Re-attach with fresh adhesive, ensuring proper surface preparation.

명세서

모델 번호302320
상표에스테스
재료플라스틱
포함된 구성 요소16 Launch Lugs (8x 1/8", 4x 3/16", 2x 1/4")
패키지 치수(L x W x H)6.5 x 3.4 x 0.4인치(16.51 x 8.64 x 1.02cm)
품목 무게0.01 온스(0.28그램)
추천연령14+ (as per safety information)
한국어:047776023208, 047776099487

보증 정보

Estes products are manufactured to high-quality standards. For specific warranty details, please refer to the documentation included with your original model rocket kit or visit the official Estes website. Generally, components like launch lugs are considered consumables or replacement parts and may not carry an extended warranty.

고객 지원

For further assistance, technical support, or inquiries regarding Estes products, please visit the official Estes web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제품 포장이나 제조업체의 web대지.

또한 방문할 수 있습니다 Estes Store on Amazon 더 많은 제품 정보를 보려면.

관련 문서 - 302320

사전view 에스테스 퀵스 모델 로켓 설명서
에스테스 퀵스(Estes Quix) 모형 로켓의 단계별 조립 및 발사 설명서입니다. 부품 목록, 조립도, ​​안전 주의사항이 포함되어 있습니다.
사전view 에스테스 알파 모델 로켓 설명서 - 조립 및 발사 가이드
에스테스 알파(Estes Alpha) 모델 로켓(모델 1225, 1756, 1753)의 조립 및 발사에 대한 종합적인 설명서입니다. 부품 목록, 단계별 조립 가이드, 마무리 팁, 회수 시스템 준비, 엔진 설정, 발사 절차 및 안전 예방 조치가 포함되어 있습니다.
사전view 에스테스 증기 모델 로켓 키트 조립 및 발사 지침
에스테스 베이퍼 모델 로켓 키트(모델 7294)를 조립, 마무리, 발사하는 데 대한 포괄적인 지침으로, 부품 목록, 단계별 조립, 도색 가이드, 안전 예방 조치 등이 포함되어 있습니다.
사전view Estes Mini Max 모델 로켓 조립 설명서: 조립 및 발사 가이드
에스테스 미니 맥스 모형 로켓 조립 및 발사에 대한 포괄적인 설명서입니다. 부품 목록, 단계별 조립 방법, 마무리 팁, 안전 수칙 등이 포함되어 있습니다.
사전view Estes Power Patrol 2481 Model Rocket Instructions
Comprehensive assembly and launch instructions for the Estes Power Patrol 2481 model rocket, detailing parts, assembly steps, recovery system, engine preparation, launch procedures, and safety guidelines.
사전view Estes Green Eggs Model Rocket Kit 1718 Assembly and Launch Instructions
Comprehensive guide for assembling and launching the Estes Green Eggs model rocket kit (Model 1718). Includes detailed parts list, step-by-step assembly instructions, finishing tips, launch procedures, and safety precautions.