Displays2go 실버 새틴 마감 간판 지지대(모델 14912) 사용 설명서

1. 서론

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Displays2go Silver Satin Finish Sign Support, Model 14912. Please read these instructions carefully before installation to ensure proper setup and safe use of the product. Retain this manual for future reference.

2. 제품 오버view

The Displays2go Silver Satin Finish Sign Support is designed to elegantly display various types of sign panels. Its edge-grip design securely holds sign panels without requiring holes to be drilled through the panel itself. This bracket mounts panels approximately 9/16-inches away from the wall, creating a professional, floating appearance. It features a setscrew lock for enhanced security, ensuring the sign panel remains firmly in place.

주요 특징은 다음과 같습니다.

• Elegant silver satin finish suitable for professional environments.
• Versatile edge-grip design accommodates glass, acrylic, or wood panels.
• Supports panel thicknesses from 1/8-inch up to 1/2-inch.
• Secure setscrew locking mechanism for panel stability.
• Comes with all necessary hardware for installation.

Figure 2.1: Displays2go Silver Satin Finish Sign Support in use, holding a sign panel.

3. 패키지 내용

Each set of Displays2go Silver Satin Finish Sign Supports (Model 14912) includes the following components for three individual sign supports:

• 3x Silver Satin Finish Sign Supports (8" W x 1" H x 1" D each)
• 3x Allen Keys (for setscrew adjustment)
• 6x 장착 나사
• 6x Wall Anchors (for drywall installation)

Figure 3.1: Included components for one sign support kit.

4. 사양

Figure 4.1: Dimensional diagram of the sign support and panel placement. Note: The diagram indicates 1/8"-3/8" panel thickness, while product description states 1/8"-1/2". Please refer to the product description for the most accurate panel thickness range.

5. 설정 및 설치

Follow these steps to properly install your Displays2go Sign Support:

1. 장착 표면 준비: Choose a suitable wall location. Ensure the surface is clean and capable of supporting the weight of the sign support and your sign panel.
2. 드릴링 지점 표시: Hold the sign support against the wall at the desired mounting position. Use a pencil to mark the locations for the two mounting screws. Ensure the support is level.
3. 드릴 파일럿 홀: Using an appropriate drill bit for your wall type, drill pilot holes at the marked locations. If mounting into drywall, insert the provided wall anchors into the pilot holes.
4. Mount the Support: Align the sign support with the pilot holes (or anchors). Insert the mounting screws through the support and into the wall/anchors. Tighten the screws firmly until the support is secure against the wall. Do not overtighten.
5. Insert Sign Panel: Carefully slide your sign panel into the channel of the sign support. Ensure the panel is centered and fully seated within the support's grip. The support is designed for panels between 1/8-inch and 1/2-inch thick.
6. 패널 보안: Locate the small setscrew on the underside of the sign support. Use the provided Allen key to gently tighten this setscrew against the bottom edge of your sign panel. Tighten just enough to hold the panel firmly in place without causing damage. Do not overtighten.

Figure 5.1: Step-by-step installation of the sign support.

6. 사용 설명서

Once installed, the Displays2go Sign Support operates by securely holding your sign panel in place. To change a sign panel, simply loosen the setscrew using the Allen key, slide out the old panel, insert the new panel, and re-tighten the setscrew. Always ensure the setscrew is tightened sufficiently to prevent the panel from slipping, but avoid excessive force to prevent damage to the panel or the support.

7. 유지관리

The Displays2go Sign Support requires minimal maintenance. To keep it looking its best:

• 청소: Wipe the silver satin finish with a soft, dry, or slightly damp 천으로 닦아주세요. 연마성 세제나 강한 화학 물질은 마감재를 손상시킬 수 있으므로 사용하지 마세요.
• 점검: Periodically check the mounting screws and the setscrew to ensure they remain tight and secure. Re-tighten if necessary.

8. 문제 해결

• Sign Panel is Loose:

  Ensure the setscrew on the underside of the support is tightened against the sign panel using the provided Allen key. Verify that your sign panel thickness is within the supported range (1/8" to 1/2").
• Support is Not Secure on Wall:

  Check that the mounting screws are fully tightened. If mounting into drywall, ensure the wall anchors are properly installed and holding firmly. If the issue persists, consider relocating the support to a stud or using more robust wall anchors suitable for the wall material.

• Difficulty Inserting Panel:

  Ensure the setscrew is sufficiently loosened before attempting to insert the panel. Verify that the panel thickness does not exceed the maximum supported thickness of 1/2 inch.

9. 보증 및 지원

For product support, warranty information, or to purchase replacement parts, please contact Displays2go directly. You can find contact information and additional resources on the official Displays2go web사이트나 원래 구매처를 통해 구매하세요.

방문하세요 디스플레이투고 스토어 더 많은 제품과 정보를 확인하세요.