임페리얼 35771 ICVG-점화 리드 사용 설명서

1. 서론

This user manual provides essential information for the safe and effective use of the Imperial 35771 ICVG-Ignitor Leads. These leads are designed for specific applications requiring 20 gauge wiring and UL 19 compliance. Please read this manual thoroughly before installation or operation.

안전 정보

• 전기 부품을 설치하거나 수리하기 전에는 항상 전원을 분리하세요.
• 전기적 위험을 예방하기 위해 모든 연결 부분이 안전하고 적절하게 절연되어 있는지 확인하세요.
• Refer to the appliance's primary instruction manual for specific wiring diagrams and safety precautions.
• 설치 단계에 대해 확실하지 않은 경우 자격을 갖춘 기술자에게 문의하세요.

2. 제품 오버view

The Imperial 35771 ICVG-Ignitor Leads are replacement components for various food service and HVAC applications. They are designed to transmit electrical signals to an ignitor, facilitating the ignition process in compatible systems.

Figure 1: Imperial 35771 ICVG-Ignitor Leads. This image displays the coiled ignitor leads, featuring multiple black and white wires terminating in blue and yellow insulated spade connectors.

주요 특징:

• 제품 유형: 식품 서비스 용품
• 와이어 게이지 : 20 가
• 규정 준수: UL 19
• 패키지 수량: 1 set of leads
• 원산지: 미국

3. 설정 및 설치

Proper installation is crucial for the safe and reliable operation of the ignitor leads. Always follow the specific instructions provided by the manufacturer of the appliance where these leads will be installed.

1. 전원 차단: Before beginning any installation, ensure that the main power supply to the appliance is completely disconnected and locked out to prevent accidental startup.
2. 입장: Gain access to the ignitor and its existing wiring within the appliance. This may involve removing panels or covers.
3. Old Leads Removal: Carefully disconnect and remove the old ignitor leads, noting the exact connection points and routing. It is recommended to take a photograph before removal for reference.
4. New Leads Connection: Connect the Imperial 35771 ICVG-Ignitor Leads to the appropriate terminals on the ignitor and the control board, matching the original wiring configuration. Ensure all spade connectors are firmly seated.
5. 보안 라우팅: Route the new leads away from hot surfaces, moving parts, and sharp edges. Use cable ties or clips if necessary to secure them in place, preventing damage or interference.
6. 재조립: Once connections are secure and routing is complete, reassemble any removed panels or covers.
7. 전원 복원: Restore power to the appliance and test for proper operation according to the appliance manufacturer's guidelines.

메모: Incorrect wiring can lead to appliance malfunction, damage, or safety hazards. If you are not confident in performing this installation, seek professional assistance.

4. 작동 원리

The Imperial 35771 ICVG-Ignitor Leads serve as the electrical conduit between the appliance's control system and the ignitor. When the appliance initiates a call for heat or ignition, the control system sends an electrical signal through these leads to the ignitor. The ignitor then heats up to a temperature sufficient to ignite the gas or fuel, initiating the combustion process.

These leads are passive components; their "operation" is the reliable transmission of electrical current. Their performance is directly tied to the integrity of their connections and the quality of the wire itself, ensuring consistent power delivery to the ignitor.

5. 유지관리

The Imperial 35771 ICVG-Ignitor Leads are designed for durability and require minimal maintenance. However, periodic inspection can help ensure continued reliable operation.

• 시각적 검사: During routine appliance maintenance, visually inspect the leads for any signs of wear, fraying, cracks in insulation, or discoloration due to heat.
• 연결 무결성: Check that all spade connectors are securely attached to their terminals. Loose connections can lead to intermittent operation or arcing.
• 라우팅: Ensure the leads remain properly routed and are not pinched, abraded, or in contact with excessively hot surfaces.
• 청소: If dust or debris accumulates on the leads, gently wipe them clean with a dry, lint-free cloth. Do not use liquid cleaners unless specifically approved for electrical components.

If any damage is observed, the leads should be replaced immediately to prevent potential safety hazards or appliance malfunction.

6. 문제 해결

If the appliance is experiencing ignition issues, the ignitor leads may be a contributing factor. Perform the following basic checks:

• 점화 불량:
  • Verify power supply to the appliance.
  • Check all lead connections for tightness and proper seating.
  • Inspect leads for visible damage (cuts, burns, fraying).
  • Consult the appliance's manual for ignitor resistance specifications and test the ignitor itself.
• 간헐적 점화:
  • Check for loose connections at both the ignitor and control board ends.
  • Ensure leads are not exposed to excessive vibration or movement that could cause intermittent contact.
  • Look for signs of arcing or carbon buildup at terminals.

If troubleshooting steps do not resolve the issue, or if you suspect a faulty ignitor lead, replacement may be necessary. Always ensure power is disconnected before performing any checks or replacements.

7. 사양

8. 보증 및 지원

For information regarding product warranty, please refer to the documentation provided with your original purchase or contact Imperial customer support directly. Warranty terms typically cover manufacturing defects under normal use conditions.

For technical assistance or further inquiries, please visit the official Imperial website or contact their customer service department. When contacting support, please have your product model number (IMP35771) and purchase details readily available.

Imperial Contact Information:

• 브랜드 스토어: Imperial Store on Amazon
• Refer to official Imperial packaging or web직접 연락처 정보를 보려면 사이트를 방문하세요.