소개
This user manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Graco 288487 Gun, Hose & Whip Kit. This kit is designed for professional airless paint spraying applications, offering durability and performance.
제품 구성 요소
The Graco 288487 Kit includes the following components:
- Graco RAC X Contractor Airless Spray Gun (2-Finger)
- RAC X Spray Tip (typically 517)
- 50-foot (15.24 meters) High-Pressure Airless Hose
- 3-foot (0.91 meters) x 3/16-inch Whip Hose
- RAC X Tip Guard
Image: The Graco 288487 kit, showing the airless spray gun, a coiled 50-foot blue high-pressure hose, and a smaller 3-foot whip hose with fittings.
설정
Proper setup is crucial for safe and efficient operation. Always refer to the main airless sprayer manual for complete system setup instructions.
- 안전이 최우선입니다. Ensure the airless sprayer is turned off and depressurized before connecting or disconnecting any components. Wear appropriate personal protective equipment (PPE), including eye protection, gloves, and a respirator.
- Connect Whip Hose: Attach the 3-foot whip hose to the main 50-foot high-pressure hose. Ensure connections are tight to prevent leaks. The whip hose provides flexibility and reduces fatigue during spraying.
- 스프레이 건 연결하기: Attach the Graco RAC X Contractor Airless Spray Gun to the free end of the whip hose. Hand-tighten securely, then use a wrench to ensure a leak-free connection.
- Install Tip Guard and Tip: Insert the RAC X spray tip into the RAC X Tip Guard. Then, thread the tip guard assembly onto the spray gun. Ensure the tip is oriented correctly for spraying (arrow pointing forward).
- 연결 확인: Double-check all hose and gun connections for tightness before starting the sprayer.
Image: The Graco 288487 kit, showing the coiled blue hose, spray gun, and associated documentation, as it appears in its packaging.
작동 지침
Once the kit is properly set up and connected to an airless sprayer, follow these general operating guidelines:
- 시스템을 프라이밍하세요: Follow your airless sprayer's instructions to prime the system with the material to be sprayed. This removes air from the hoses and gun.
- 압력 조절: Set the sprayer pressure according to the paint manufacturer's recommendations and the specific spray tip being used.
- 트리거 작동: The Contractor Airless Spray Gun features a smooth, lightweight 2-finger trigger pull. Always engage the trigger lock when not actively spraying to prevent accidental discharge.
- 분무 기술: Maintain a consistent distance from the surface and move the gun at a steady pace to ensure even coverage. Overlap each pass by approximately 50%.
- Clearing Tip Clogs: If the spray pattern becomes uneven or stops, rotate the RAC X spray tip 180 degrees to the unclog position, trigger the gun to clear the obstruction, then rotate back to the spray position.
유지
Regular maintenance extends the life of your Graco kit components and ensures optimal performance.
- 매일 청소: After each use, thoroughly flush the spray gun and hoses with an appropriate cleaning solution (water for latex, mineral spirits for oil-based paints) until the fluid runs clear.
- Gun Filter: The spray gun features an Easy Out Gun Filter. Regularly remove and clean this filter to prevent clogs and maintain consistent spray performance. The filter is designed to be cleaned from the inside out.
- 팁 유지 관리: Clean the spray tip after each use. Store tips in a tip saver fluid to prevent drying and clogging.
- 호스 관리: Coil hoses neatly after cleaning and storage. Avoid kinking or crushing the hoses, as this can damage the internal lining.
- Needle Cartridge: The modular needle cartridge design allows for easy servicing. If the gun begins to spit or leak from the front, the needle or seals may need replacement. Refer to Graco service manuals for detailed instructions.
문제 해결
다음은 일반적인 문제와 이에 대한 잠재적 해결책입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Gun Spitting / Uneven Spray | Clogged spray tip; worn tip; worn needle/seals in gun; low pressure. | Clear tip by rotating 180 degrees; replace worn tip; service gun needle/seals; increase pressure. |
| No Spray / Low Flow | Clogged gun filter; clogged tip; kinked hose; no material in hopper/bucket. | Clean gun filter; clear/replace tip; straighten hose; ensure material supply. |
| Leaking from Gun | Loose fittings; worn gun seals/packing. | Tighten connections; replace gun repair kit components. |
For more complex issues, consult a qualified Graco service technician or the comprehensive Graco service manual for your specific airless sprayer model.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 그라코 |
| 모델 번호 | 288487 |
| 포함된 구성 요소 | RAC X Contractor Airless Spray Gun, RAC X Spray Tip, 50' Hose, 3' Whip Hose |
| 총 유형 | 2-Finger Airless Spray Gun |
| 호스 길이 | 50 feet (main hose) + 3 feet (whip hose) |
| Whip Hose Diameter | 3/16 인치 |
| 최대 압력 | 227 바(3300 PSI) |
| 재료 | Plastic, Metal (Gun components) |
| 색상 | 실버, 블루 |
| 품목 무게(키트) | Approximately 0.01 Ounces (Note: This weight seems incorrect for the full kit, likely refers to a small component. Actual kit weight will be higher.) |
| 한국어: | 633955215474 |
보증 및 지원
For information regarding product warranty, technical support, or authorized service centers, please visit the official Graco website or contact Graco customer service directly. Always use genuine Graco replacement parts to ensure compatibility and maintain product integrity.
You can find more information and products from Graco at their official store: Graco Official Store on Amazon.
