1. 서론
This manual provides essential information for the safe and efficient operation of your RCF NX10-SMA 10-inch 2-Way Coaxial Monitor. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
그림 1: 전면 view of the RCF NX10-SMA coaxial monitor, showcasin보호 그릴과 컴팩트한 디자인이 특징입니다.
2. 안전 정보
감전, 화재 또는 부상을 예방하려면 항상 다음 안전 예방 조치를 준수하세요.
- 전원 공급 장치: 본 기기는 지정된 전원 공급 장치에만 연결하십시오.tage. 전원 코드가 손상되지 않았는지, 그리고 제대로 접지되었는지 확인하십시오.
- 통풍: 환기구를 막지 마십시오. 과열을 방지하기 위해 장치 주변에 충분한 공기 흐름을 확보하십시오.
- 수분: Do not expose the unit to rain or moisture. Avoid placing liquids on or near the unit.
- 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 놓기: Ensure the unit is placed on a stable surface or securely mounted to prevent it from falling.
- 청력 보호: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the unit at high volumes.
3. 설정
3.1 풀기
Carefully remove the RCF NX10-SMA monitor from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
3.2 물리적 배치
The NX10-SMA is designed for versatile placement, commonly used as a stage monitor. Its angled cabinet allows for optimal sound projection towards the performer. Ensure the monitor is placed on a stable, flat surface or securely mounted.
그림 2: 측면 view of the RCF NX10-SMA monitor, illustrating its angled profile s에 적합합니다tag전자 모니터링.
3.3 연결
Refer to the rear panel for all input and output connections. Ensure all connections are secure before powering on the unit.
- AC 입력: Connect the provided power cable to the AC INPUT socket.
- AC Link: Use the AC LINK output to daisy-chain power to other compatible RCF units. Do not exceed the maximum current rating.
- 입력: Connect your audio source (e.g., mixer, instrument) to the INPUT XLR connector.
- 링크: Use the LINK XLR output to send the audio signal to another NX10-SMA unit or other audio equipment.
Figure 3: Rear panel of the RCF NX10-SMA, detailing the AC input/link, audio input/link, and control knobs.
4. 운영
4.1 전원 켜기/끄기
After all connections are made, switch the power button located on the rear panel to the 'ON' position. To power off, switch the button to 'OFF'. It is recommended to power on your monitors last and power them off first in your audio chain.
4.2 볼륨 조절
Adjust the 'VOLUME' knob on the rear panel to set the desired output level. Start with the volume at a low setting and gradually increase it to prevent sudden loud sounds.
4.3 Input Sensitivity/EQ Presets
The NX10-SMA may feature controls for input sensitivity or EQ presets (e.g., 'STAGE', 'MAIN', 'BOOST'). Consult the labels on the rear panel (refer to Figure 3) and adjust these settings according to your application and desired sound profile.
5. 유지관리
5.1 청소
Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure no liquids enter the unit.
5.2 보관
When not in use, store the RCF NX10-SMA in a dry, dust-free environment, away from extreme temperatures. If transporting, use appropriate protective cases.
5.3 일반 관리
Regularly check cables for wear and tear. Avoid dropping or subjecting the unit to strong impacts.
6. 문제 해결
If you encounter issues with your RCF NX10-SMA, refer to the following common problems and solutions:
- 소리 없음:
- Ensure the unit is powered on and the power cable is securely connected.
- Check that the audio source is active and connected correctly to the INPUT.
- Verify the 'VOLUME' knob is not set to minimum.
- 다른 오디오 케이블로 테스트해 보세요.
- 왜곡된 소리:
- 오디오 소스의 입력 레벨을 줄이세요.
- Lower the 'VOLUME' knob on the monitor.
- 케이블 손상 여부를 확인하십시오.
- 장치 전원이 켜지지 않음:
- Ensure the power cable is fully inserted into both the unit and the power outlet.
- 다른 장치의 전원 콘센트를 확인해 보세요.
- 전원 스위치가 'ON' 위치에 있는지 확인하세요.
If the problem persists after attempting these solutions, contact RCF customer support or a qualified service technician.
7. 사양
The following table outlines the key specifications for the RCF NX10-SMA 10-inch 2-Way Coaxial Monitor:
| 특징 | 사양 |
|---|---|
| 제조업체 | 리시피에이 |
| 모델 번호 | NX10-SMA |
| 제품 치수 | 20 x 19.7 x 15.9 인치 |
| 품목 무게 | 38.8파운드 |
| 장착 유형 | Wall Mount (Note: Requires compatible mounting hardware, sold separately) |
| 단위 수 | 1.0 카운트 |
| 방수 | 거짓 |
8. 보증 정보
For detailed warranty information, please refer to the warranty card included with your product or visit the official RCF web사이트. 보증 약관은 지역 및 소매업체에 따라 다를 수 있습니다.
9. 고객 지원
If you require technical assistance, have questions about your RCF NX10-SMA, or need to report a service issue, please contact RCF customer support or your authorized RCF dealer. Contact information can typically be found on the RCF official web사이트나 제품 설명서에서 확인하세요.
