Testo 0560 8312 830-T1 적외선 온도계 사용 설명서

1. 서론

This manual provides essential instructions for the safe and effective use of the Testo 0560 8312 830-T1 IR Thermometer. This device is designed for non-contact measurement of surface temperatures in various industrial and trade applications. It features 12:1 optics and a dual laser for precise targeting, allowing for accurate temperature readings even on smaller objects from a safe distance.

2. 안전 정보

Please read this section carefully before operating the device to ensure safe and proper use.

• Do not point the laser directly into eyes or at other people.
• 폭발성 대기에서 장치를 사용하지 마십시오.
• Protect the device from extreme temperatures, impacts, and strong vibrations.
• 장치를 깨끗하고 건조하게 유지하십시오.
• Only use the device for its intended purpose as described in this manual.
• 수리는 승인된 직원만이 수행해야 합니다.

3. 제품 오버view

The Testo 830-T1 IR Thermometer is a handheld device designed for quick and accurate non-contact temperature measurements.

Figure 1: Testo 830-T1 Infrared Thermometer with included battery.

그림 2: 전면 view of the Testo 830-T1, showing the display, measurement trigger, and control buttons.

3.1개의 구성요소

• 적외선 센서: Located at the front of the device, used for non-contact temperature measurement.
• 듀얼 레이저 포인터: Two laser dots indicate the measurement spot size.
• 표시하다: Shows temperature readings, measurement units, battery status, and other indicators.
• 측정 트리거: 측정 및 레이저를 활성화합니다.
• 제어 버튼: For navigating menus, adjusting settings (e.g., emissivity, units), and accessing functions like MIN/MAX.
• 배터리 칸: 배터리 설치용 손잡이 부분에 있습니다.

4. 설정

4.1 배터리 설치

1. 온도계 손잡이에서 배터리 덮개를 찾으세요.
2. 덮개를 엽니다.
3. Insert two AAA batteries, ensuring correct polarity (+/-). The device requires 2 AAA batteries, which are included.
4. 배터리 덮개를 단단히 닫으세요.

4.2 초기 전원 켜기 및 장치 선택

Upon first use or after battery replacement, the device will power on. You may need to select your preferred temperature unit (Celsius or Fahrenheit).

• To change units: Typically, this involves pressing and holding a specific button (often the 'Mode' or 'Set' button, or an arrow button) while the device is off, then powering it on, or accessing a menu option. Refer to the on-screen prompts or the official Testo documentation for the exact procedure for your specific device firmware, as methods can vary.

5. 사용 설명서

5.1 측정하기

1. 적외선 센서를 목표물 쪽으로 향하게 하십시오.
2. Press and hold the measurement trigger. The dual laser pointers will activate, indicating the measurement spot.
3. 측정된 온도가 디스플레이에 표시됩니다.
4. Release the trigger to hold the last measured value (HOLD function).

Figure 3: The Testo 830-T1 in use, measuring the surface temperature of a radiator.

5.2 Understanding 12:1 Optics and Dual Laser

The 12:1 optics mean that at a distance of 12 inches, the measurement spot diameter is 1 inch. The dual laser pointers converge at the center of this measurement spot, helping you accurately identify the area being measured. This is particularly useful for measuring smaller objects or from a greater distance.

5.3 MIN/MAX 함수

The device can display the minimum and maximum temperatures recorded during a continuous measurement. This function is useful for monitoring temperature fluctuations over a period.

• To activate MIN/MAX: Press the appropriate button (refer to your device's specific button layout, often an arrow or 'Mode' button) while taking a measurement. The display will cycle through current, minimum, and maximum values.

5.4 방사율 조정

Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. For accurate readings, adjust the emissivity setting on your thermometer to match the material being measured. Common emissivity values:

• 0.95 (default for many devices): Most organic materials, painted surfaces, water, plastic.
• 0.85-0.90 : Concrete, brick, rough wood.
• 0.60-0.70 : Polished metals (can vary significantly).

Consult an emissivity table for specific materials. Incorrect emissivity settings will lead to inaccurate temperature readings.

6. 유지관리

6.1 청소

To ensure optimal performance and longevity, keep the device clean.

• Wipe the device exterior with a clean, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid scratching the lens.

6.2 배터리 교체

When the battery indicator on the display shows low power, replace the batteries promptly to avoid interruption of operation. Follow the battery installation steps in Section 4.1.

6.3 보관

Store the thermometer in a dry, dust-free environment within the recommended temperature range (refer to specifications). If storing for extended periods, remove the batteries to prevent leakage.

7. 문제 해결

If you encounter issues with your Testo 830-T1, refer to the following common problems and solutions:

• 기기의 전원이 켜지지 않습니다:
  • Check if batteries are correctly inserted with proper polarity.
  • 배터리를 새것으로 교체하세요.
• 부정확한 판독값:
  • Ensure the infrared lens is clean.
  • Verify the emissivity setting matches the target material.
  • Ensure the measurement distance is appropriate for the target size (12:1 optics).
  • 유리나 반사율이 높은 표면을 통해 측정하는 것은 피하십시오.
• 레이저가 보이지 않음:
  • 배터리 잔량을 확인하십시오.
  • Ensure the measurement trigger is pressed.

If problems persist, contact Testo customer support for assistance.

8. 사양

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please contact Testo SE & Co. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official web대지.

제조업체: Testo SE & Co.

보증 청구를 위해 구매 증명서를 보관하십시오.