소개
This manual provides instructions for the installation, maintenance, and care of your Shark VX33 XF769 Replacement Vacuum Filters. These filters are designed to maintain the performance of your compatible Shark cordless hand vacuum by effectively capturing dust and debris.
Image: A package containing three Shark VX33 XF769 replacement vacuum filters.
호환성
The Shark VX33 XF769 replacement filters are compatible with the following Shark Cordless Hand Vacuum models:
- Shark SV769 Pet Perfect Hand Vacuums
- 샤크 SV7728
- Shark SV728NC, SV728N-1
- Shark SV736, SV738, SV738C, SV738CV
- Shark SV749, SV748C
- Shark SV726N, SV728N
- 샤크 SV719
- Shark SV736R, SV736CR
- Shark SV70CR, SV70, SV70Z
- Shark SV90, SV90Z
These filters are also known by part numbers XSB769N, XSB769, XF769, XSB726, and XSB736N.
설치
To ensure optimal performance and proper fit, follow these steps for installing your new filter:
- Remove the Dust Cup: Detach the dust cup from your Shark cordless hand vacuum according to your vacuum's specific instructions.
- 오래된 필터 제거: Carefully remove the existing filter from inside the dust cup. Dispose of the old filter responsibly.
- 새 필터를 삽입하세요: Place the new Shark VX33 XF769 filter into the dust cup. Ensure the filter material is pointed towards the nose of the vacuum and press it firmly all the way into the pod until it is securely seated.
- Reattach the Dust Cup: Reattach the dust cup to the hand vacuum, ensuring it clicks securely into place.
Image: Three Shark vacuum filters, one of which is disassembled to illustrate its internal structure and components.
유지관리 및 청소
Regular cleaning of your washable filter is essential for maintaining your vacuum's suction power and extending the filter's lifespan. It is recommended to clean the filter every 30 days.
- 필터 제거: Follow the initial steps for installation to remove the filter from the dust cup.
- 헹구기: Rinse the filter under running tap water until the water runs clear. Do not use soap or detergents.
- 완전히 공기 건조: Shake off excess water and allow the filter to air dry completely for at least 24 hours before reinserting it into the vacuum. It is crucial that the filter is 100% dry to prevent damage to the vacuum motor. Do not use a hairdryer or other heating methods to dry the filter.
- 대사: These filters are designed to be washable and reusable. However, for optimal performance, it is recommended to replace the filter after 3-4 washes or when you notice a significant decrease in suction power, even after cleaning.
이미지: 클로즈업 view of a single Shark vacuum filter, highlighting its pleated material and frame.
문제 해결
If you experience reduced suction or unusual noises from your vacuum after filter installation or cleaning, consider the following:
- Filter Not Fully Dry: Ensure the filter is completely dry before reinstallation. A damp filter can impede airflow and potentially damage the motor.
- 부적절한 설치: Verify that the filter is pressed firmly and correctly seated within the dust cup, with the filter material facing the correct direction.
- 필터가 막혔습니다: If the filter is old or has been washed multiple times, it may be permanently clogged. Consider replacing it with a new filter.
- Other Blockages: Check the vacuum's nozzle, hose, and dust cup for any other blockages that might be affecting suction.
명세서
| 제품 이름 | Shark VX33 XF769 Replacement Vacuum Filters |
| 부품 번호 | XF769, XSB769N, XSB769, XSB726, XSB736N |
| 호환성 | Shark SV769 and other specified cordless hand vacuum models |
| 재사용성 | 재사용 가능 (세척 가능) |
| 권장 청소 | 30일마다 |
| 추천 교체 | After 3-4 washes or when performance degrades |
| 조각 수 | 3 |
| 제품 치수 | 6 x 6 x 5 인치 |
| 품목 무게 | 7 온스 |
보증 및 지원
Specific warranty information for these replacement filters is not provided in the product details. For any warranty inquiries or further support regarding your Shark vacuum or its accessories, please refer to the documentation that came with your original Shark vacuum cleaner or visit the official Shark web고객 서비스 연락처 정보를 제공하는 사이트입니다.
