Intermec PM43 Direct Thermal/Thermal Transfer Printer

1. 제품 오버view

The Intermec PM43 is a robust direct thermal and thermal transfer printer designed for industrial and commercial label printing applications. It offers high-speed monochrome printing at 203 dpi resolution, making it suitable for a wide range of labeling needs. Connectivity options include Fast Ethernet and USB, and it features a user-friendly touchscreen interface for easy operation.

This printer supports various media types, primarily labels, and is capable of printing at speeds up to 12 inches per second.

Figure 1: Intermec PM43 Printer. This image shows the front-right view of the Intermec PM43 printer, highlighting its touchscreen display on the left, the Intermec logo on the top cover, and a clear side panel revealing the label roll inside.

2. 설정 및 설치

2.1 프린터 풀기

Carefully remove the printer from its packaging. Ensure all packing materials are removed from around the printer, especially from inside the media compartment. Verify that all components listed in the packing slip are present.

2.2 전원 연결

1. Connect the power cord to the power input port on the rear of the printer.
2. 전원 코드의 다른 쪽 끝을 접지된 전기 콘센트에 꽂습니다.
3. Press the power button, typically located near the power input, to turn on the printer. The touchscreen display should illuminate.

2.3 컴퓨터에 연결하기

The PM43 printer supports both USB and Ethernet connectivity.

• USB 연결: 프린터의 USB 포트와 컴퓨터의 사용 가능한 USB 포트에 USB 케이블을 연결하세요.
• 이더넷 연결: Connect an Ethernet cable from the printer's Ethernet port to your network router or switch. The printer can be configured for network printing via its touchscreen interface or web 인터페이스.

2.4 미디어 장착 (라벨 및 리본)

The PM43 supports both direct thermal and thermal transfer printing. For thermal transfer, a ribbon is also required.

1. 프린터의 상단 덮개를 엽니다.
2. Place the label roll onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
3. Thread the labels through the media guides and under the print head assembly. Adjust the media guides to fit the width of your labels.
4. If using thermal transfer, install the ribbon onto the ribbon supply spindle and thread it according to the diagrams inside the printer.
5. Close the top cover. The printer may automatically calibrate for the new media.

3. 프린터 작동

3.1 Touchscreen Interface Navigation

The PM43 features an intuitive touchscreen display. Use your finger or a stylus to navigate through menus and select options. The main screen typically displays the printer status (e.g., "Ready"), date, and time.

• 상태 아이콘: Icons at the top of the screen indicate connectivity (Ethernet, USB), media status, and ribbon status.
• 메뉴 접근: Tap the menu icon (usually three horizontal lines or a gear icon) to access printer settings, calibration, and diagnostic tools.
• 키패드 : The integrated keypad allows for numerical input and function key access (F1-F5).

3.2 테스트 라벨 인쇄

To verify proper setup and media loading, print a test label:

1. From the main screen, navigate to the 'Tools' or 'Diagnostics' menu.
2. Select 'Print Test Label' or 'Configuration Label'.
3. The printer will feed and print a label containing its current configuration and status information.

3.3 Driver Installation and Software

컴퓨터에서 인쇄하기 전에 적절한 프린터 드라이버를 설치하십시오. 드라이버는 일반적으로 제조업체 웹사이트에서 구할 수 있습니다. website. Follow the on-screen instructions during driver installation. For advanced label design and printing, specialized label software may be required.

4. 유지관리

Regular maintenance ensures optimal print quality and extends the life of your PM43 printer.

4.1 프린트 헤드 청소

The print head should be cleaned regularly, especially if print quality degrades or after changing several rolls of media.

1. 프린터 전원을 끄고 전원 코드를 뽑으세요.
2. 프린트 헤드 어셈블리를 엽니다.
3. Using a lint-free swab moistened with isopropyl alcohol (99% pure), gently wipe across the print head elements. Allow to dry completely before closing the print head.

4.2 플래튼 롤러 청소

The platen roller helps feed the media and should be cleaned to prevent media jams and ensure consistent feeding.

1. With the printer off and power disconnected, locate the platen roller beneath the print head.
2. Using a lint-free cloth moistened with isopropyl alcohol, rotate the platen roller manually while wiping its surface.

4.3 일반 청소

프린터 외부를 부드러운 천으로 닦으세요.amp cloth. Do not use abrasive cleaners or solvents. Keep the media compartment free of dust and debris.

5. 문제 해결

This section provides solutions to common issues you might encounter with your PM43 printer.

5.1 인쇄 출력 없음

• 전원 확인: 프린터 전원이 켜져 있고 전원 코드가 제대로 연결되어 있는지 확인하십시오.
• 연결성 확인: Verify USB or Ethernet cable connections. For network printing, ensure the printer has a valid IP address and is reachable on the network.
• Check Media/Ribbon: Ensure labels and ribbon (if applicable) are loaded correctly and not depleted.
• 프린터 상태: Check the touchscreen for any error messages or status indicators.

5.2 인쇄 품질이 좋지 않음

• 프린트 헤드 청소: A dirty print head is a common cause of poor print quality (streaks, voids). Refer to Section 4.1.
• Adjust Darkness/Heat Settings: Adjust print darkness or heat settings via the printer's touchscreen or driver settings.
• Media/Ribbon Compatibility: Ensure you are using compatible labels and ribbons for your printer and application.
• Print Head Pressure: Verify that the print head is properly latched and applying even pressure.

5.3 Media Jams

• 명확한 경로: Open the printer cover and carefully remove any jammed media.
• 가이드 조정: Ensure media guides are properly adjusted to the width of your labels, preventing skewing.
• Clean Platen Roller: A dirty or worn platen roller can contribute to jams. Refer to Section 4.2.

6. 기술 사양

7. 보증 및 지원

7.1 보증 정보

The Intermec PM43 printer comes with a limited warranty. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) web보증 범위, 기간 및 청구 절차에 관한 자세한 약관은 해당 사이트를 참조하십시오.

7.2 기술 지원

For technical assistance, troubleshooting beyond this manual, or service requests, please contact Intermec (Honeywell) customer support. Support contact information, including phone numbers and online resources, can typically be found on the manufacturer's official web대지.

When contacting support, please have your printer's model number (PM43A11NA0041201) and serial number ready.