1. 서론
Thank you for choosing the Timberland Washington Summit Digital Sensor Pacer Watch. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new timepiece. Designed for active individuals, this watch features a digital display, sensor-based functions including a finger touch heart rate meter, and a pacer function.
주요 특징은 다음과 같습니다.
- 디지털 시간 표시
- Finger touch heart rate meter
- Pacer function
- 스톱워치
- Light function for low-light conditions
- Durable polyurethane case and strap
- Mineral glass with sapphire coating
- Water-resistant to 30 meters (99 feet)
2. 안전 정보
- 방수 기능: The watch is water-resistant to 30 meters (3 ATM). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is ~ 아니다 수영, 다이빙 또는 뜨거운 물로 샤워할 때 적합하지 않습니다. 증기가 밀봉 부분을 통과할 수 있기 때문입니다.
- 온도: Avoid exposing the watch to extreme temperatures (hot or cold) for extended periods, as this may affect battery life and accuracy.
- 영향: 시계를 강한 충격이나 진동으로부터 보호하십시오.
- 약: Avoid contact with solvents, detergents, perfumes, and cosmetics, as they may damage the case, strap, or seals.
- 배터리: Do not attempt to open the watch case or replace the battery yourself unless you have the proper tools and expertise. Improper handling can damage the watch and void the warranty.
3. 제품 오버view
Familiarize yourself with the components and controls of your Timberland Washington Summit watch.
이미지 3.1: 앞쪽 view of the Timberland Washington Summit Digital Sensor Pacer Watch. The digital display shows time, day, and date. Buttons are visible on the left and right sides of the case, labeled 'LIGHT', 'MODE', 'SENSOR', and 'LAP/RESET'. The bezel indicates compass directions and 'FINGER TOUCH HEART RATE METER'.
시계 구성 요소:
- 디지털 디스플레이: Shows time, date, day, and various function indicators.
- 사례: Durable polyurethane case.
- 견장: Comfortable orange polyurethane strap.
- 버튼:
- 조명 (좌측 상단): 백라이트를 활성화합니다.
- 모드(좌측 하단): Cycles through different watch modes (Time, Stopwatch, Alarm, Pacer, Heart Rate).
- SENSOR (Top Right): Used for activating sensor functions, specifically the heart rate monitor.
- LAP/RESET (Bottom Right): Used for lap timing in stopwatch mode and resetting values in setting modes.
- 센서 영역: Located on the bezel, marked "FINGER TOUCH HEART RATE METER". This area interacts with your finger to measure heart rate.
4. 설정
4.1 초기 시간 및 날짜 설정
- From the Timekeeping Mode, press and hold the 방법 button until the seconds begin to flash, indicating you are in setting mode.
- 를 누르세요 방법 button repeatedly to cycle through the settings: Seconds → Hours → Minutes → Year → Month → Day.
- 설정이 깜빡이는 동안에는 다음을 사용하세요. 랩/리셋 button to increase the value. Hold the button to change values rapidly.
- 모든 설정이 조정되면 다음을 누릅니다. 방법 button again to exit the setting mode and return to Timekeeping Mode.
4.2 12/24-Hour Format Selection
시간 유지 모드에서 다음을 누릅니다. 랩/리셋 12시간제('오후' 표시 포함)와 24시간제 형식을 전환하는 버튼입니다.
5. 사용 설명서
5.1 모드 선택
를 누르세요 방법 button to cycle through the watch's various functions:
Timekeeping → Stopwatch → Alarm → Pacer → Heart Rate Monitor → Timekeeping
5.2 Using the Backlight (LIGHT Button)
를 누르세요 빛 button (top left) to illuminate the display for a few seconds. This is useful in low-light conditions.
5.3 스톱워치 기능
- 시간 표시 모드에서 누르세요 방법 스톱워치 모드에 도달할 때까지 기다리세요. 화면에 "00:00:00"이 표시됩니다.
- 를 누르세요 감지기 오른쪽 상단의 버튼을 눌러 스톱워치를 시작하세요.
- 를 누르세요 감지기 스톱워치를 일시 정지하려면 버튼을 다시 누르세요.
- 일시 정지된 상태에서 누르세요 랩/리셋 button (bottom right) to reset the stopwatch to "00:00:00".
- 랩 타임을 기록하려면 다음을 누르세요. 랩/리셋 button while the stopwatch is running. The display will momentarily show the lap time before returning to the running total.
5.4 Finger Touch Heart Rate Meter
This watch features a sensor to measure your heart rate. For accurate readings, ensure your finger is clean and dry.
- 시간 표시 모드에서 누르세요 방법 until you reach the Heart Rate Monitor mode. The display may show "HR" or a similar indicator.
- Place the pad of your index finger firmly on the "FINGER TOUCH HEART RATE METER" sensor area on the watch bezel. Ensure good contact.
- Remain still and quiet. The watch will begin to detect your pulse. This may take a few seconds.
- Your heart rate in beats per minute (BPM) will be displayed.
- Remove your finger from the sensor to exit the measurement.
메모: The heart rate monitor is designed for general fitness and wellness purposes. It is not a medical device and should not be used for diagnostic or treatment purposes. Factors like movement, skin condition, and environmental temperature can affect accuracy.
5.5 페이서 기능
The pacer function helps you maintain a consistent rhythm during activities. You can set a desired beat per minute (BPM) for the watch to emit an audible beep.
- 시간 표시 모드에서 누르세요 방법 until you reach the Pacer mode.
- 를 누르고 계세요 방법 button until the pacer BPM value begins to flash.
- 사용하세요 랩/리셋 button to adjust the desired pacer BPM.
- 누르다 방법 again to confirm the setting and exit setting mode.
- To start/stop the pacer, press the 감지기 button. The watch will beep at the set interval.
6. 유지관리
6.1 시계 청소
- 시계 케이스와 스트랩은 부드러운 천으로 정기적으로 닦아주세요.amp 옷감.
- For stubborn dirt, use a mild soap solution and rinse thoroughly with clean water. Ensure the watch is completely dry before wearing.
- Avoid using harsh chemicals or abrasive cleaners, as they can damage the watch's finish.
6.2 배터리 교체
The watch is powered by a product-specific battery. When the display becomes dim or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
메모: Improper battery replacement can compromise the watch's water resistance and void the warranty.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 비어 있거나 어둡습니다. | 배터리가 부족합니다. | 배터리를 교체하십시오(6.2절 참조). |
| 시간이 정확하지 않습니다. | Time not set correctly or watch has been reset. | 시간과 날짜를 재설정하십시오(4.1절 참조). |
| Heart rate reading is inaccurate or not appearing. | Poor finger contact, movement during measurement, or dry skin. | Ensure firm, steady contact with the sensor. Remain still. Moisten finger slightly if skin is very dry. |
| Watch functions are unresponsive. | 일시적인 소프트웨어 오류 또는 배터리 부족입니다. | Try removing and reinserting the battery (if comfortable doing so, otherwise seek professional help). If issue persists, replace battery. |
8. 사양
이미지 8.1: The Timberland Washington Summit Digital Sensor Pacer Watch worn on a wrist, illustrating its size and fit.
이미지 8.2: A visual guide comparing various watch case diameters, providing context for the watch's size.
- 모델 번호: 13386JPOB_02
- 케이스 직경: 47 x 53mm
- 케이스 소재: 폴리우레탄
- 스트랩 소재: 폴리우레탄
- 디스플레이 유형: 디지털 LCD
- 크리스탈 소재: Mineral glass with sapphire coating
- 방수 기능: 30미터 (3 ATM / 99피트)
- 기능: Time, Date, Day, Stopwatch, Alarm, Pacer, Finger Touch Heart Rate Meter, Backlight
- 배터리: 제품별 배터리 1개(포함)
- 패키지 크기: 10.41 x 8.38 x 8.13cm
- 품목 무게: 158.76g
9. 보증 및 지원
This Timberland watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or warranty claims, please contact Timberland customer service or an authorized service center. Contact information can typically be found on the warranty card or the official Timberland web대지.
When contacting support, please have your watch model number (13386JPOB_02) and proof of purchase readily available.
