테크마 투 Stage 설정값 제어 152 사용자 설명서

소개

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Tekmar Two Stage Setpoint Control 152. This microprocessor-based control is designed to function either as a two-stage setpoint control or as two independent setpoint controls. It supports two-stage 가열, 2-stage cooling, or a combined heating/cooling interlock function. When configured for independent operation, it can manage any combination of heating or cooling devices. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

안전 정보

경고: 부적절한 설치, 조정, 변경, 서비스 또는 유지보수는 재산 피해, 부상 또는 사망을 초래할 수 있습니다. 이 장비를 설치하거나 서비스하기 전에 설치 및 작동 지침을 철저히 읽으십시오.

• 모든 배선은 지역 전기 규정 및 법규를 준수해야 합니다.
• Disconnect power before performing any wiring or service.
• This control must be installed by a qualified technician.
• Do not operate the control with damaged wiring.
• Ensure the control is protected from moisture and extreme temperatures.

제품 끝view

The Tekmar 152 control features a digital display and intuitive buttons for setting parameters. It is designed for precise temperature management in HVAC systems.

그림 1: 앞쪽 view of the Tekmar Two Stage Setpoint Control 152. This image shows the white rectangular control unit with a grey central panel. The panel includes a digital display at the top, three buttons below it labeled "Setpoint", "Differential", and "Delay", and two arrow buttons (up and down) for navigation. The Tekmar logo and model number "Two Stage Setpoint Control 152" are also visible.

주요 특징:

• 펄스 폭 변조(PWM)
• 두-stage operation or independent heating/cooling control
• Control of up to two different setpoints (with additional sensor)
• Digital display for easy monitoring and adjustment

설정 및 설치

Before beginning installation, ensure all power to the HVAC system is disconnected at the main breaker.

설치:

1. Select a suitable location for the control, away from direct sunlight, drafts, and heat sources.
2. Mount the control securely to a wall or electrical box using appropriate fasteners.

배선:

Refer to the wiring diagram provided with the product packaging for specific connections. General steps include:

1. Connect the power supply wires to the designated terminals on the control.
2. Connect the sensor wires to the sensor input terminals.
3. Connect the output wires for heating/cooling stages to the appropriate terminals, ensuring correct polarity.
4. 전원을 다시 공급하기 전에 모든 연결부가 단단히 고정되었는지, 배선이 올바른지 다시 한번 확인하십시오.

Note: Professional installation is recommended to ensure compliance with all electrical codes and optimal system performance.

작동 지침

The Tekmar 152 control is operated using the three main buttons and the up/down arrow buttons on the front panel.

Setting the Setpoint:

1. Press the "Setpoint" button. The current setpoint value will flash on the digital display.
2. Use the "Up" or "Down" arrow buttons to adjust the setpoint to the desired temperature or value.
3. Press the "Setpoint" button again to confirm and save the new setting, or wait a few seconds for it to save automatically.

Adjusting Differential:

The differential setting determines the temperature band around the setpoint before the control activates or deactivates a stage.

1. Press the "Differential" button. The current differential value will flash.
2. Use the "Up" or "Down" arrow buttons to adjust the differential.
3. Press the "Differential" button again to confirm.

Configuring Delay:

The delay setting prevents rapid cycling of equipment, extending its lifespan.

1. Press the "Delay" button. The current delay value will flash.
2. Use the "Up" or "Down" arrow buttons to adjust the delay time.
3. Press the "Delay" button again to confirm.

투에스tage vs. Independent Control:

The operating mode (two-stage or independent) is typically configured during initial setup by a qualified technician. Consult your installer or the full technical manual for details on changing this mode.

유지

The Tekmar 152 control requires minimal maintenance.

• 청소: Periodically wipe the control's exterior with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 점검: Annually inspect wiring connections for any signs of wear or looseness. Ensure the control is free from dust and debris.
• 센서 점검: If temperature readings appear inaccurate, check the sensor and its wiring for damage.

Note: For any internal maintenance or repairs, contact a qualified service technician.

문제 해결

If the problem persists after attempting these solutions, contact a qualified HVAC technician or Tekmar customer support.

명세서

• 모델: 152
• 상표: 테크마르
• 제어 유형: 두 개의 Stage Setpoint Control
• 전원 공급 장치: Refer to product label for specific power requirements.
• 표시하다: 디지털 LCD
• 제어 방법: 원격
• 특징: Pulse Width Modulation, 2 Stage operation or heat & cool control, Control of up to 2 different setpoints (with additional sensor)
• 품목 무게: 약 12온스(0.34kg)
• 한국어: 782301923430

보증 및 지원

For warranty information, please refer to the documentation included with your product or visit the official Tekmar web대지.

For technical support or service inquiries, please contact Tekmar customer service. Contact details can typically be found on the manufacturer's web사이트 또는 제품 포장.

Visit the official Tekmar Store on Amazon