1. 서론
This instruction manual provides essential information for the safe and effective use of the Gewiss 6.3 x 32 mm 4A 250V Fuse (Model GW20922). This fuse is designed to protect electrical circuits from overcurrent conditions, preventing damage to equipment and reducing fire hazards. Please read this manual thoroughly before installation and use.
2. 안전 정보
경고: Electrical work should only be performed by qualified personnel. Failure to follow these safety instructions may result in electric shock, fire, or serious injury.
- Always disconnect power to the circuit before installing, inspecting, or replacing fuses.
- Ensure the replacement fuse matches the original fuse's specifications (current rating, voltage rating, and dimensions). Using an incorrect fuse can lead to inadequate protection or circuit damage.
- 우회하거나 t하지 마십시오amp퓨즈가 있는 er.
- Wear appropriate personal protective equipment (PPE), such as insulated gloves and safety glasses, when working with electrical circuits.
- Keep fuses away from moisture and extreme temperatures.
3. 제품 오버view
The Gewiss 6.3 x 32 mm 4A 250V Fuse is a cylindrical glass-tube fuse with metal end caps. It is designed for general-purpose overcurrent protection in various electrical and electronic applications.
그림 1: A single Gewiss 6.3 x 32 mm 4A 250V glass-tube fuse. This image shows the transparent glass body and the metallic end caps, which are typical for this type of electrical protection component.
주요 특징:
- 치수: 지름 6.3mm x 길이 32mm
- 현재 평가: 4 Amp에레스 (A)
- 권tage 등급: 250 Volts (V) AC
- 유형: 유리관 퓨즈
- 기능: 과전류 보호
4. 설정 및 설치
Fuses are typically installed in fuse holders or clips within an electrical circuit. The installation process involves replacing an existing fuse or inserting a new one into a designated slot.
설치 단계:
- 전원 분리: Before beginning, ensure that the power supply to the circuit where the fuse will be installed or replaced is completely disconnected. Verify with a voltag전자 테스터.
- 퓨즈 홀더를 찾으십시오: Identify the fuse holder or clips in your electrical device or panel.
- Remove Old Fuse (if applicable): If replacing a blown fuse, carefully remove the old fuse from its holder. Use a fuse puller tool if necessary to avoid direct contact and ensure safety.
- 새 퓨즈 삽입: Gently insert the new Gewiss 6.3 x 32 mm 4A 250V Fuse into the fuse holder. Ensure it is seated firmly and correctly in the clips. Do not force the fuse.
- 복원력 : Once the fuse is securely in place, restore power to the circuit.
Note: Always confirm that the new fuse's specifications match the circuit's requirements.
5. 작동 원리
The Gewiss fuse operates as a sacrificial device designed to protect an electrical circuit from overcurrent. When the current flowing through the fuse exceeds its rated amperage (4A) for a specified duration, the metallic filament inside the glass tube melts, breaking the circuit. This open circuit condition prevents excessive current from reaching and damaging sensitive components or causing overheating and potential fire hazards.
Once a fuse blows, it must be replaced. It is not resettable.
6. 유지관리
Fuses themselves require no maintenance. Their function is to fail safely when an overcurrent condition occurs. The primary maintenance task related to fuses is their inspection and replacement.
Fuse Inspection and Replacement:
- If a circuit stops functioning, a blown fuse is a common cause.
- 시각적 검사: After disconnecting power, remove the fuse and visually inspect the filament inside the glass tube. A blown fuse will typically show a broken or charred filament.
- 연속성 테스트: For fuses where the filament is not clearly visible, use a multimeter to check for continuity. A good fuse will show continuity (a very low resistance reading), while a blown fuse will show an open circuit (infinite resistance).
- 대사: Always replace a blown fuse with a new fuse of the exact same type, current rating, and voltage rating. Refer to Section 4 for installation steps.
7. 문제 해결
The primary issue related to a fuse is when it blows. If a fuse blows, it indicates an underlying problem in the electrical circuit it protects.
What to do if a fuse blows:
- 전원 분리: 해당 회로의 전원을 즉시 차단하십시오.
- 원인 확인: A fuse blows due to an overcurrent. This can be caused by:
- 단락: A direct connection between live and neutral/ground wires.
- 초과 적재: Too many devices drawing power from the same circuit.
- 결함이 있는 가전제품: A malfunctioning device connected to the circuit.
- 퓨즈 교체: Once the cause is identified and resolved, replace the blown fuse with a new one of identical specifications (refer to Section 4).
- 테스트 회로: Restore power and carefully test the circuit to ensure proper operation and that the underlying issue has been resolved. If the new fuse blows again, there is still an unresolved problem in the circuit, and further investigation by a qualified electrician is recommended.
8. 사양
| 기인하다 | 값 |
|---|---|
| 상표 | 게비스 |
| 모델 번호 | GW20922 |
| 현재 평가 | 4 Amp오히려 |
| 권tage 등급 | 250 볼트 AC |
| 치수 | 6.3mm x 32mm |
| 에너지원 | AC |
| ASIN | B008GL6F5Y |
| GTIN | 08011564338159 |
| 첫 번째 이용 가능 | 12년 2020월 XNUMX일 |
9. 보증 및 지원
As a consumable electrical protection component, fuses typically do not come with a specific warranty beyond being free from manufacturing defects upon purchase. For specific warranty information or technical support regarding Gewiss products, please refer to the official Gewiss web사이트를 방문하거나 고객 서비스에 직접 문의하세요.
For general electrical safety and installation advice, consult a qualified electrician.
