1. 서론
This manual provides detailed instructions for the safe and effective use of your Stanley Fatmax 0-42-086 Digital Level. Please read these instructions carefully before operating the device and retain them for future reference.
The Stanley Fatmax 0-42-086 is a 120cm digital level designed for precise measurement of angles and slopes. It features a digital display, 360° readout capability, and a hold function for convenience in various working conditions.
2. 안전 정보
Always observe basic safety precautions when using this tool to reduce the risk of injury. Keep the tool clean and dry. Do not expose the tool to extreme temperatures or moisture. Use the tool only for its intended purpose.
3. 제품 구성품
Familiarize yourself with the main components of your digital level:
- 디지털 디스플레이
- Control Buttons (On/Off, Hold, Reference, Calibrate, Unit Selection)
- Spirit Vials (3 vials)
- 측정 표면
- 배터리 칸
그림 1: 클로즈업 view of the digital display and control buttons on the Stanley Fatmax digital level. Buttons include On/Off, Hold, Reference, Calibrate, and unit selection.
그림 2: Another perspective of the digital display and control buttons, showing the ergonomic design for easy access during operation.
4. 설정
4.1 배터리 설치
The digital level requires batteries for operation. Locate the battery compartment, typically on the side or back of the digital module. Insert the required batteries, ensuring correct polarity (+/-). Close the compartment securely.
Note: The product specifications indicate "Batteries Included? No" and "Batteries Required? No" which may be a data discrepancy. Assume batteries are required and not included.
4.2 초기 전원 켜기
를 누르세요 켜기/끄기 button to power on the device. The digital display will illuminate and show the current angle or slope.
5. 사용 설명서
5.1 전원 켜기/끄기
를 누르세요 켜기/끄기 button to turn the digital level on or off.
5.2 측정하기
Place the measuring surface of the level firmly against the object you wish to measure. The digital display will show the angle in degrees, percentage, or mm/m, depending on the selected unit.
그림 3: A user holding the Stanley Fatmax digital level to measure an angle. The digital display is visible for easy reading.
5.3 360° Readout
The level features a 360° readout, meaning the display automatically flips when the level is inverted, ensuring the reading is always upright and easy to read from any orientation.
5.4 홀드 기능
를 누르세요 잡고 있다 button to freeze the current measurement on the display. This is useful for taking readings in difficult-to-see areas or when you need to record a specific value. Press 잡고 있다 다시 함수를 해제합니다.
5.5 단위 선택
Use the unit selection button (often labeled with °/%/mm/m or similar icon) to cycle through different measurement units: degrees (°), percentage (%), and millimeters per meter (mm/m).
5.6 Reference Function
그만큼 참조 function allows you to set the current position as a new "0" reference point. This is useful for measuring relative angles from a specific surface. To activate, place the level on your desired reference surface and press the 참조 button. The display will show "0.0" and subsequent measurements will be relative to this new reference.
5.7 교정
For optimal accuracy, periodic calibration may be required. To calibrate the level:
- Place the level on a flat, stable surface.
- 를 누르세요 교정하다 button. Follow the on-screen prompts, which typically involve rotating the level 180 degrees and pressing the button again.
- Refer to the specific calibration sequence indicated on the device's display or a more detailed manual if available.
6. 유지관리
6.1 청소
Wipe the level with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the display or housing. Ensure the device is dry before storage.
6.2 보관
Store the digital level in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
그림 4: The Stanley Fatmax digital level stored in its protective carrying case, which helps protect it from dust and damage during transport and storage.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 켜지지 않음 | 배터리가 방전되었거나 잘못 설치되었습니다. | 배터리 극성을 확인하세요. 필요하면 배터리를 교체하세요. |
| 부정확한 판독 | Needs calibration; dirty measuring surface. | Perform calibration as per section 5.7. Clean the measuring surface. |
| Backlight won't switch off | Possible internal fault or stuck button. | Try removing and reinserting batteries. If problem persists, contact customer support. |
| Horizontal level appears loose | 제조상의 결함 또는 손상. | This indicates a potential defect. Contact customer support for assistance. |
8. 사양
- 모델: 0-42-086
- 상표: 스탠리 팻맥스
- 길이: 120cm
- 디지털 정확도: 0.10° at level and plumb, 0.20° at other angles
- 판독 값 : 360°
- 전원: 배터리(포함되지 않음)
- 재료: Metal, Plastic, Paper (packaging)
- 제품 크기: 18 x 7.5 x 134.5cm
- 품목 무게: 1.9kg
9. 보증 정보
Specific warranty details for the Stanley Fatmax 0-42-086 Digital Level are not provided in this document. Please refer to the product packaging, official Stanley Fatmax web자세한 보증 정보는 해당 웹사이트 또는 구매처를 참조하십시오.
10. 고객 지원
For technical assistance, spare parts, or service inquiries, please contact Stanley Fatmax customer support through their official web웹사이트 또는 제품 구매 시 제공된 연락처 정보를 이용하십시오.
