Gewiss GW20287 F형 주황색 전기 소켓 사용 설명서

1. 서론

This manual provides essential instructions for the safe installation, operation, and maintenance of your Gewiss GW20287 Type F Orange Electrical Socket. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are crucial for safety and optimal performance.

2. 안전 정보

경고: 감전 위험이 있습니다. 설치는 모든 지역 및 국가 전기 규정을 준수하여 자격을 갖춘 전기 기술자가 수행해야 합니다.

• 설치, 유지보수 또는 수리를 시도하기 전에 항상 주 회로 차단기 또는 퓨즈 박스에서 전원을 차단하십시오.
• 볼륨을 확인하십시오tag소켓의 정격 전류 및 전류 용량이 전기 시스템 요구 사항과 일치하는지 확인하십시오.
• 젖어 있거나 d인 곳에는 설치하지 마십시오.amp 해당 환경에 적합하도록 특별히 등급이 지정된 경우가 아니면 설치하지 마십시오.
• Never attempt to modify the socket.
• Keep children away from electrical outlets.

3. 제품 오버view

The Gewiss GW20287 is an orange, bi-axial 2P+T (two poles plus earth) socket designed for 16A applications, compatible with both Italian and German standard plugs. It is part of the Gewiss System series and occupies 2 modules in a standard electrical box.

그림 1: 전면 view of the Gewiss GW20287 Type F Orange Electrical Socket, showing the two-pole plus earth configuration suitable for Italian and German standards.

4. 설정 및 설치

Installation should only be carried out by a qualified electrician.

1. 전원 차단: Locate the main circuit breaker or fuse box for the area where the socket will be installed. Turn off the power completely to prevent electric shock. Verify with a voltag전자 테스터.
2. 배선 준비: Ensure the electrical wires (Phase, Neutral, Earth) are correctly identified and stripped to the appropriate length for connection.
3. 전선 연결: Connect the wires to the corresponding terminals on the back of the Gewiss GW20287 socket. Typically:
   • Phase (Live) wire (often brown or black) to the 'L' terminal.
   • Neutral wire (often blue) to the 'N' terminal.
   • Earth (Ground) wire (often green/yellow) to the 'E' or earth symbol terminal.
   모든 연결이 단단하고 안전한지 확인하세요.
4. 소켓을 장착하세요: Carefully place the socket into the wall box, ensuring no wires are pinched. Secure it using the mounting screws provided with the wall box or socket frame.
5. 페이스플레이트 설치: Attach the decorative faceplate (if applicable) over the socket.
6. 복원력 : Once installation is complete and all covers are securely in place, restore power at the main circuit breaker.
7. 시험: Test the socket with a known working appliance or a socket tester to ensure proper functionality.

5. 사용 설명서

To use the Gewiss GW20287 socket:

1. Ensure the appliance plug is compatible with the Type F (Italian/German bi-axial 2P+T) socket.
2. Insert the appliance plug firmly and completely into the socket.
3. To remove, pull the plug straight out from the socket. Do not pull by the cord.

6. 유지관리

• 청소: Disconnect power before cleaning. Wipe the surface of the socket with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
• 정기 검사: Periodically check the socket for any signs of damage, discoloration, loose connections, or overheating. If any issues are observed, disconnect power and consult a qualified electrician.

7. 문제 해결

If you experience issues with your Gewiss GW20287 socket, consider the following:

• 전원 없음:
  • 메인 차단기 또는 퓨즈 박스를 확인하여 전원이 켜져 있는지 확인하십시오.
  • Verify that the appliance plugged into the socket is working correctly by testing it in another known working socket.
  • If the issue persists, there may be an internal wiring problem. Contact a qualified electrician.
• 느슨한 연결: If a plug feels loose in the socket, or if there is intermittent power, disconnect power and have a qualified electrician inspect the socket and its connections.
• 과열/탄 냄새: Immediately disconnect power at the circuit breaker. Do not use the socket. This indicates a serious electrical fault. Contact a qualified electrician immediately.

8. 사양

9. 보증 및 지원

For warranty information and technical support, please refer to the official Gewiss website or contact your local Gewiss distributor. Keep your purchase receipt as proof of purchase.

You can visit the official Gewiss store for more information: Gewiss Store