1. 소개 및 이상view
The Intermec PM43 and PM43c are mid-range industrial label printers designed for reliable performance in various environments. These printers feature a tamper-proof, 10-language color touch-screen or universal-icon interface, aiming to reduce workforce training and support requirements. As a third-generation Intermec industrial printer, the PM43 series is engineered for maximum uptime, offering quick deployment, fast print speeds, and proven reliability for label printing applications.
그림 1.1: 전면 view of the Intermec PM43 Industrial Label Printer. This image shows the printer's compact design, control panel with a screen and keypad, and the label output slot.
2. 안전 정보
프린터를 작동하기 전에 모든 안전 지침을 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 부상이나 장비 손상이 발생할 수 있습니다.
- 프린터는 항상 접지된 전원 콘센트에 연결하세요.
- Do not operate the printer with damaged power cords or plugs.
- 작동 중에는 움직이는 부분에 손이나 헐렁한 옷을 가까이 두지 마십시오.
- Avoid touching the printhead immediately after printing, as it can be hot.
- 프린터 주변에 적절한 환기가 이루어지도록 하십시오.
- Use only approved media and ribbons to prevent damage and ensure optimal performance.
3. 설정
3.1 포장 풀기 및 배치
Carefully remove the printer from its packaging. Place the printer on a stable, level surface with adequate space for media loading and access to power and data ports.
3.2 Connecting Power and Data Cables
Connect the power cord to the printer and then to a grounded electrical outlet. For data communication, connect a USB cable to the printer's USB port and your computer, or an Ethernet cable to the printer's Ethernet port and your network.
그림 3.1: 후면 view of the Intermec PM43 printer. This image highlights the various connectivity ports, including power input, Ethernet, and USB ports, located on the back panel.
그림 3.2: 클로즈업 view of the Intermec PM43 printer's rear ports. This detailed image shows the power input, Ethernet port, and USB ports for connecting to a computer or network.
3.3 미디어 장착 (라벨 및 리본)
Open the printer's top cover. Follow the internal diagrams for correct loading of label media and thermal transfer ribbon (if applicable). Ensure the media is properly aligned and secured by the guides.
Figure 3.3: Intermec PM43 printer with the top cover open. This view illustrates the internal mechanism for loading label rolls and thermal transfer ribbons, with various rollers and guides visible.
4. 사용 설명서
4.1 전원 켜기 및 초기화
Press the power button to turn on the printer. The printer will perform a self-test and initialize. The color touch-screen or universal-icon interface will display the ready status.
4.2 사용자 인터페이스 탐색
Use the touch-screen or keypad to navigate through the printer's menus. Common functions include print settings, media calibration, and network configuration. Refer to the on-screen prompts for specific operations.
4.3 라벨 인쇄
Once the printer is connected to your computer or network and configured, send print jobs from your label design software. The PM43 supports various language emulations including DSim, Fingerprint, and IPL, ensuring compatibility with existing systems.
5. 유지관리
5.1 프린트 헤드 청소
Regularly clean the printhead to ensure optimal print quality and extend its lifespan. Use a lint-free cloth moistened with isopropyl alcohol. Power off the printer and allow the printhead to cool before cleaning.
5.2 청소 롤러 및 미디어 경로
Inspect and clean the media rollers and path to prevent dust and adhesive buildup, which can cause media jams or poor print quality. Use a soft, damp 옷감.
5.3 미디어 및 리본 교체
When media or ribbon runs out, follow the loading instructions in Section 3.3. Ensure proper tension and alignment for continuous operation.
6. 문제 해결
This section addresses common issues you might encounter with your Intermec PM43 printer.
- 전원 없음: Check power cord connections and ensure the outlet is functional.
- 인쇄 품질 불량: Clean the printhead (Section 5.1). Ensure media and ribbon are correctly loaded and compatible. Adjust print darkness settings via the printer interface.
- 미디어 잼: Open the printer cover and carefully remove any jammed media. Ensure media is loaded correctly and guides are adjusted.
- 프린터가 응답하지 않음: Verify data cable connections (USB/Ethernet). Restart the printer and the connected computer/network device. Check printer status on the interface for error messages.
- 연결 문제: For Ethernet, check network cable and network settings on the printer. For USB, ensure drivers are installed on the computer.
For persistent issues, consult the detailed error messages displayed on the printer's interface or refer to the manufacturer's online support resources.
7. 사양
| 특징 | 사양 |
|---|---|
| 제품 유형 | Direct Thermal/Thermal Transfer Printer |
| 모델 번호 | PM43A11000000201 |
| 인쇄 색상 | 단색화 |
| 최대 흑백 인쇄 속도 | 12인치/초 |
| 최대 인쇄 해상도 | 203dpi |
| 미디어 유형 | 블랙 마크, 연속 라벨, 접이식 라벨, 간격 라벨, 라이너 라벨, 라이너리스 라벨, 노치 라벨, 롤 공급식 라벨 Tag |
| 최대 미디어 크기 | 4 x 6 인치 |
| 연결 기술 | 이더넷, USB |
| 제어 방법 | 만지다 |
| 언어 에뮬레이션 | DSim, 지문, IPL, XML |
| 품목 무게 | 30.9파운드 |
| 제품 치수 | 24 x 17.9 x 15.8 인치 |
| 전원 | AC 공급 |
| 호환 장치 | PC |
8. 보증 및 지원
8.1 보증 정보
This Intermec PM43 printer comes with a Limited Warranty. Please refer to the warranty documentation provided with your purchase for specific terms, conditions, and duration.
8.2 기술 지원
For technical assistance, driver downloads, or further troubleshooting, please visit the official Intermec support website or contact their customer service department. Have your printer's model number (PM43A11000000201) and serial number ready when contacting support.
