Intel DQ77MK Motherboard User Manual

1. 제품 오버view

The Intel DQ77MK motherboard is designed for Intel Core i3, i5, i7, and Xeon processors, featuring an LGA 1155 socket. It supports Intel vPro technology and Trusted Platform Module (TPM), offering DVI-DVI and USB 3.0 connectivity in a micro-ATX form factor. This manual provides essential information for the proper installation, operation, and maintenance of your motherboard.

This image displays the Intel DQ77MK motherboard, highlighting its various components. Visible features include the LGA 1155 CPU socket, four DDR3 DIMM slots (two blue, two black), multiple PCIe expansion slots (blue and white), and the rear I/O panel with DVI, USB, and audio ports.

2. 설정 및 설치

2.1 풀기 및 검사

Carefully remove the motherboard from its packaging. Inspect the board for any visible damage. Ensure all accessories listed in the product documentation are present.

2.2 구성 요소 식별

Familiarize yourself with the layout of the motherboard using the provided image in the overview section. Key components include the CPU socket, DIMM slots for memory, PCIe slots for expansion cards, and various connectors for power, storage, and peripherals.

2.3 설치 단계

1. 섀시 준비: Ensure your computer case is ready for motherboard installation. Install standoffs in the appropriate locations for a micro-ATX board.
2. CPU 설치: Open the LGA 1155 CPU socket lever. Align the Intel Core i3, i5, i7, or Xeon processor with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket. Gently place the CPU into the socket and close the lever to secure it.
3. CPU 쿨러 설치: 써멀 페이스트를 도포하고(미리 도포되어 있지 않은 경우) 제조사의 지침에 따라 CPU 쿨러를 설치하십시오. CPU 팬 케이블을 마더보드의 지정된 헤더에 연결하십시오.
4. RAM 설치: Open the clips on the DDR3 DIMM slots. Align the memory modules with the slots, ensuring the notch on the module matches the key in the slot. Press firmly on both ends until the clips snap into place. The motherboard supports up to 32 GB of DDR3 memory at 1333 MHz.
5. 마더보드 장착: Carefully place the motherboard into the chassis, aligning the screw holes with the installed standoffs. Secure the motherboard with screws.
6. 전원 연결: Connect the 24-pin ATX main power connector and the 4-pin or 8-pin CPU power connector from your power supply to the motherboard.
7. 저장 장치 연결: Connect SATA data cables from your storage drives (HDDs, SSDs) to the SATA ports on the motherboard. Connect the corresponding power cables from your power supply to the drives.
8. 전면 패널 헤더를 연결하세요: Connect the cables from your chassis's front panel (power button, reset button, USB ports, audio jacks, LED indicators) to the corresponding headers on the motherboard. Refer to the motherboard's detailed diagram for correct pin assignments.
9. 확장 카드 설치: Insert any necessary PCIe expansion cards (e.g., graphics card, network card) into the appropriate PCIe slots and secure them with the chassis's retention mechanism.
10. 주변기기 연결: 모니터, 키보드, 마우스 및 기타 외부 장치를 후면 I/O 포트에 연결하십시오.

3. 사용 설명서

3.1 첫 번째 부팅 및 BIOS 설정

After completing the hardware installation, connect the power cord and turn on your system. During the initial boot, press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup utility. Here you can configure boot order, system time, and other essential settings. Save changes and exit to continue.

3.2 운영 체제 설치

Insert your operating system installation media (USB drive or DVD) and follow the on-screen prompts to install your preferred operating system (e.g., Windows). Ensure the boot order in BIOS is set to prioritize your installation media.

3.3 드라이버 설치

After the operating system is installed, install the necessary drivers for the motherboard's components. These typically include chipset drivers, graphics drivers (if using integrated graphics), audio drivers, and network drivers. Drivers can usually be found on the Intel support website for the DQ77MK model.

4. 유지관리

4.1 청소

Regularly clean the interior of your computer case to prevent dust buildup, which can lead to overheating and component failure. Use compressed air to remove dust from fans, heatsinks, and motherboard surfaces. Ensure the system is powered off and unplugged before cleaning.

4.2 BIOS 업데이트

인텔 지원 정보를 주기적으로 확인하세요. webBIOS 업데이트 사이트입니다. BIOS 업데이트는 시스템 안정성을 향상시키고, 새로운 하드웨어 지원을 추가하거나, 버그를 수정할 수 있습니다. 시스템 손상을 방지하기 위해 BIOS 업데이트 시 인텔에서 제공하는 지침을 주의 깊게 따르십시오.

4.3 구성 요소 검사

Occasionally inspect cables and connections to ensure they are secure. Check for any signs of physical damage or bulging capacitors on the motherboard, which may indicate a problem.

5. 문제 해결

This section provides basic troubleshooting steps for common issues. For more complex problems, refer to the Intel support web현장에 직접 방문하거나 자격을 갖춘 기술자에게 문의하십시오.

• 전원 없음: Ensure all power cables (24-pin ATX, CPU power) are securely connected. Verify the power supply is functioning correctly and the power switch on the PSU is in the 'ON' position.
• 디스플레이 없음: Check that the monitor is connected to the correct video output port on the motherboard or graphics card. Ensure the monitor is powered on and set to the correct input source. Reseat the graphics card and RAM modules.
• 시스템 부팅 실패: Listen for beep codes from the motherboard, which can indicate specific hardware issues (e.g., RAM, CPU, graphics card). Try booting with minimal components (CPU, one RAM stick, graphics card if no integrated graphics) to isolate the problem.
• 운영 체제 오류: If the operating system fails to load or crashes frequently, consider reinstalling drivers, running system diagnostics, or reinstalling the operating system.

6. 사양

7. 보증 및 지원

7.1 보증 정보

This Intel motherboard is covered by a manufacturer's warranty. Please refer to the warranty documentation included with your product or visit the official Intel web보증 범위, 기간 및 청구 절차에 관한 자세한 약관은 해당 사이트를 참조하십시오.

7.2 기술 지원

For technical assistance, driver downloads, or further troubleshooting, please visit the official Intel support website. You can find comprehensive resources, FAQs, and contact information for customer support there.