1. 서론
The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.
주요 특징:
- 광대역 amp합리화.
- Incorporates switched-mode power supplies.
- Allows mixing of MATV signals via an independent input.
- 컴팩트한 크기: 180 x 110 x 55mm.
- High-shielding chassis, manufactured from Zamak.
- 분리된 amplification with very low noise figure, preserving signal quality.
- Ultra-reduced ergonomic design.
그림 1: 후면 view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.
2. 안전 정보
Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- 전원 공급 장치: 기기가 올바른 전압의 전원 콘센트에 연결되어 있는지 확인하십시오.tag기술 사양에 명시된 대로 e 및 주파수.
- 통풍: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
- 수분: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp 환경.
- 청소: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
- 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 설치: Ensure the device is securely mounted on a stable surface to prevent it from falling.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Televes 5363 Multiband Amp리퍼
- Power cable (integrated or separate, depending on model variant)
- 사용 설명서(본 문서)
- 장착 액세서리(나사, 벽면 플러그)
4. 설정 및 설치
The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:
4.1. 장착 Amp리퍼
- Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
- Mark the positions for the mounting screws on the wall or surface.
- Drill pilot holes if necessary and insert wall plugs.
- 보안 amp적절한 나사를 사용하여 증폭기를 사용하십시오.
4.2. Connecting Signals
그만큼 amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.
Figure 2: Detail of the input connections and configuration switches on the Televes 5363 amp리퍼.
- VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
- SAT 입력: Connect your satellite dish signal cable to the designated SAT input.
- 산출: 의 출력을 연결하십시오 amplifier to your SMATV distribution network or directly to your television/receiver.
4.3. 전원 연결
전원 케이블을 연결하세요 amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.
그림 3: 전면 view of the Televes 5363 Multiband Amplifier, showing the power input.
5. 운영
The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.
5.1. Signal Mixing
그만큼 amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.
5.2. 게인 조정
그만큼 amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.
6. 유지관리
To ensure optimal performance and longevity of your Televes 5363 Multiband Amplifier의 경우 다음의 간단한 유지 관리 지침을 따르세요.
- 청소: 주기적으로 외부를 청소하십시오. amp부드럽고 마른 천으로 닦아주세요. 연마성 세제나 용제를 사용하지 마세요.
- 통풍: 과열을 방지하기 위해 통풍구에 먼지나 이물질이 없는지 확인하십시오.
- 사이: 가끔 모든 케이블 연결부를 점검하여 안전하고 부식되지 않았는지 확인하세요.
- 환경: 유지하다 amp증폭기는 직사광선과 극한 온도 변화를 피해 건조하고 서늘한 곳에 보관하십시오.
7. 문제 해결
If you encounter issues with your Televes 5363 Multiband Amplifier의 경우, 다음의 일반적인 문제와 해결책을 참조하세요.
- 신호 없음:
- Check all cable connections to ensure they are properly seated.
- 확인해주세요 amplifier is receiving power (check power indicator light if available).
- Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
- Weak or Poor Quality Signal:
- Check the quality of the input signals before they reach the amp리퍼.
- Ensure all connections are tight and free from damage or corrosion.
- 확인해주세요 amplifier's gain settings (if adjustable) are appropriate for your installation.
- 전원 없음:
- Check the power cable connection to both the amplifier and the electrical outlet.
- 콘센트가 정상적으로 작동하는지 다른 기기를 사용하여 테스트해 보세요.
이러한 해결 방법을 시도한 후에도 문제가 지속되면 자격을 갖춘 기술 지원팀에 문의하세요.
8. 기술 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 5363 |
| 제조업체 | 텔레브 |
| 재료 | 자 막 |
| 입력 수 | 2 (VHF/UHF, SAT) |
| Output Level (Vs) | 124 dBuV |
| Gain (SAT) | 45데시벨 |
| 주파수 범위 | Up to 2150 MHz (FI) |
| 장착 유형 | 표면 실장 |
| 치수(길이 x 너비 x 높이) | 180 x 110 x 55mm |
| 제품 무게 | 950g |
| 전원 공급 장치 | Switched-mode power supply (internal) |
| 필요한 배터리 | 아니요 |
9. 보증 및 지원
This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes web대지.
For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes web대지.
