소개
Thank you for choosing the CLP Washington Mesh Ergonomic Office Chair. This manual provides detailed instructions for the assembly, operation, maintenance, and specifications of your new office chair. Please read this manual carefully before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.
1. 설치 및 조립
Your CLP Washington office chair requires assembly. Please ensure all components are present before beginning. An Allen key is typically included for assembly. Follow these general steps:
- 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼낸 후 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
- 바퀴를 받침대에 부착: Insert the five gliding wheels into the openings at the ends of the chrome metal base. Push firmly until they click into place.
- 가스 리프트 삽입: 조립된 받침대의 중앙 구멍에 가스 리프트 실린더를 넣으십시오.
- 좌석에 메커니즘 부착: Secure the rocking/tilt mechanism to the underside of the seat using the provided screws. Ensure the front of the mechanism aligns with the front of the seat.
- 팔걸이를 좌석과 등받이에 부착하세요: Connect the armrests to both the seat and the backrest using the appropriate screws. Ensure they are securely fastened.
- 시트 어셈블리를 가스 리프트에 연결하십시오: Carefully place the assembled seat (with mechanism and armrests attached) onto the gas lift cylinder. The tapered end of the gas lift should fit snugly into the mechanism.



2. 사용 설명서
The CLP Washington office chair offers several adjustment features to enhance your comfort and support.
- 높이 조정: To adjust the seat height, pull the lever located under the seat upwards while taking your weight off the chair to raise it, or while seated to lower it. Release the lever at your desired height.
- Tilt/Rocking Mechanism: The chair features a rocking mechanism. Use the lever under the seat to engage or disengage the tilt function. Some models may also have a tension knob to adjust the resistance of the rocking motion.
- 회전 기능: The chair is designed to swivel 360 degrees, allowing for easy movement and access to different areas of your workspace without needing to reposition the entire chair.
- 유동성: The five gliding wheels on the chrome base allow for smooth movement across various floor surfaces.


3. 관리 및 유지 보수
Proper care will help maintain the appearance and functionality of your office chair.
- 청소: 광고로 깨끗이 닦아내세요amp cloth. For synthetic leather and mesh surfaces, use a mild soap solution if necessary, then wipe with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- 점검: 모든 나사와 볼트가 단단히 조여져 있는지 정기적으로 점검하세요. 흔들림이나 불안정성을 방지하기 위해 필요하면 다시 조여주세요.
- 과부하를 피하세요: 최대 중량인 140kg을 초과하지 마십시오.
- 직사광선으로부터 보호하세요: Prolonged exposure to direct sunlight can cause fading or damage to the upholstery materials.

4. 문제 해결
의자에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
- 의자 높이 조절이 안 돼요: 가스 리프트 레버가 완전히 체결되었는지 확인하십시오. 문제가 지속되면 가스 리프트 실린더를 교체해야 할 수 있습니다.
- 의자 흔들림: Check all assembly screws and bolts. Tighten any loose connections. Ensure the base is properly seated on the gas lift.
- 바퀴가 매끄럽게 굴러가지 않습니다. Check for debris (hair, dust) caught in the wheels. Clean them thoroughly. Ensure wheels are correctly inserted into the base.
- 삐걱거리는 소리: Apply a small amount of silicone lubricant to moving parts, such as the tilt mechanism or where the gas lift meets the base. Avoid oil-based lubricants on plastic parts.
5. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 씨엘피(CLP) |
| 모델 번호 | 1012801 |
| 제품 치수(전체) | Height: 110 - 118 cm, Depth: 53 cm, Width: 53 cm |
| 좌석 높이 | 47 – 55cm |
| Seat Area (Width x Depth) | 50 x 50cm |
| 등받이 높이 | 67cm |
| 팔걸이 높이 | 22cm |
| 최대 하중 용량 | 140kg |
| 품목 무게 | 10kg |
| 재료 | Synthetic leather, Mesh (100% microfiber), Chrome-plated metal base |
| 특별 기능 | Height adjustable, Swivel, Rocking mechanism, Rolling wheels |


6. 보증 정보
Specific warranty details for the CLP Washington Office Chair may vary by region and retailer. Please refer to the warranty documentation provided with your purchase or contact your point of sale for information regarding warranty coverage, terms, and conditions. Generally, products are covered against manufacturing defects for a specified period from the date of purchase.
7. 고객 지원
For further assistance, parts replacement, or any questions not covered in this manual, please contact the retailer or manufacturer directly. Have your purchase receipt and product model number (Washington) ready when contacting support.
Manufacturer: CLP





