ProMaster LS1(N) Basic Light Stand (Model 9245) Instruction Manual
소개
The ProMaster LS1(N) light stand is a basic, lightweight stand designed for supporting smaller studio lights, LED panels, or camera-mounted flashes. This manual provides essential information for its safe and effective use.
주요 특징
- 가볍고 휴대 가능한 디자인.
- Adjustable height for versatile lighting setups.
- Standard 1/4-inch screw mount for broad compatibility with various lighting equipment.
- 내구성이 뛰어난 알루미늄 합금 구조.
- Stable tripod base.
설치 지침
Follow these steps to correctly set up your ProMaster LS1(N) Basic Light Stand:
- Unpack the light stand from its carrying bag.
- 스탠드를 평평하고 안정된 표면에 놓으세요.
- 삼각대 다리가 완전히 펴지고 안정될 때까지 천천히 펼쳐주세요.
- Loosen the locking knobs on each section of the central column.
- Extend the central column to the desired height.
- Tighten all locking knobs securely to prevent slippage.
- Attach your lighting equipment to the 1/4-inch screw mount at the top of the stand. Ensure it is securely fastened.
Figure 1: The ProMaster LS1(N) light stand shown fully extended with its tripod legs spread for stability.
Video 1: Demonstration of unfolding and adjusting a similar light stand, including attaching a light and using sandbags for stability.
Video 2: Visual guide on setting up and adjusting a light stand, highlighting its lightweight and portable nature.
작동 지침
The ProMaster LS1(N) light stand offers simple adjustments for optimal lighting.
높이 조정
- To adjust the height, loosen the locking knobs on the central column sections.
- Carefully raise or lower the sections to achieve the desired height.
- Always re-tighten all locking knobs firmly after adjustment to ensure stability.
액세서리 부착
The top of the stand features a universal 1/4-inch screw mount.
- Screw your light, camera, or other compatible accessory onto this mount.
- Ensure the accessory is tightened securely to prevent accidental detachment.
그림 2: 클로즈업 view of the ProMaster LS1(N) light stand's top mount with a studio light attached, demonstrating its compatibility.
관리 및 유지 보수
- Regularly inspect all locking mechanisms and screws for tightness.
- 부드럽고 마른 천으로 스탠드를 닦으십시오. 연마성 세제나 용제는 사용하지 마십시오.
- Store the stand in its carrying bag in a dry, cool place when not in use to protect it from dust and damage.
- Do not overload the stand beyond its recommended weight capacity.
문제 해결
스탠드 불안정성
- Ensure all tripod legs are fully extended and evenly spread.
- Verify that all locking knobs are securely tightened.
- If using heavy equipment, consider adding sandbags to the base for increased stability.
높이 조절이 어렵습니다
- Check that all locking knobs are sufficiently loosened before attempting to adjust the height.
- Ensure no debris is obstructing the telescoping sections.
제품 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | LS1 |
| 제품 크기 (접었을 때) | 28.6 x 2.8 x 2.8 인치 |
| 품목 무게 | 2파운드 |
| 제조업체 | 프로마스터 |
| 재료 | 알루미늄 합금 |
| 최대 높이 | 73.6인치(약 6.1피트) |
| 장착 나사 | 1/4-inch universal |
보증 및 지원
For warranty information or technical support regarding your ProMaster LS1(N) Basic Light Stand, please refer to the official ProMaster web해당 웹사이트를 방문하거나 고객 서비스 센터에 직접 문의하십시오. 구매 증빙을 위해 구매 영수증을 보관하십시오.
