소개
The Satco S6596 is a 55-watt T6 circline fluorescent light bulb designed for various lighting fixtures. This bulb provides 3000K warm white light with an 82 CRI (Color Rendering Index) and features a 4-pin base. Its dimensions are approximately 1.13 inches in width and 9.00 inches in height.
This manual provides essential information for the safe and correct installation, operation, and maintenance of your Satco S6596 light bulb.
안전 정보
- Always disconnect power to the fixture before installing or replacing the bulb.
- Handle the bulb with care. Fluorescent bulbs are made of glass and can break if dropped or mishandled.
- Do not use this bulb in fixtures not designed for circline fluorescent bulbs or with incompatible ballasts. This bulb requires a compatible driver (ballast) to operate.
- 형광등에는 소량의 수은이 함유되어 있으므로 지역 규정에 따라 폐기하십시오.
- 전구의 유리 부분을 맨손으로 직접 만지지 마십시오. 손에 묻은 기름이 전구의 수명을 단축시킬 수 있습니다. 깨끗한 천이나 장갑을 사용하십시오.
패키지 내용
- 1 x Satco S6596 Circline Fluorescent Light Bulb
설정 및 설치
- 전원 차단: Ensure the power supply to the lighting fixture is turned off at the circuit breaker before beginning installation.
- 오래된 전구를 제거합니다(해당되는 경우): If replacing an existing bulb, carefully remove it from the fixture. Note how the old bulb was connected to ensure correct installation of the new one.
- 새 전구 삽입: Align the 4-pin base of the Satco S6596 bulb with the receptacle in your fixture. Gently push the bulb into place until the pins are fully seated. The connector on this bulb is flat, which may differ from older bulbs with angled connectors. Ensure your fixture's wiring allows for a flexible connection.
- 전구를 보호하세요: If your fixture has retaining clips or brackets, ensure the bulb is securely held. Handle the bulb with care during this step, as it is fragile.
- 복원력 : 전구를 제대로 설치했으면 회로 차단기에서 조명 기구의 전원을 다시 켜십시오.
- 시험: 전구가 제대로 작동하는지 확인하려면 전구 스위치를 켜세요.
Image: The Satco S6596 circline fluorescent light bulb, showing its circular shape and 4-pin base connector.
작동 지침
The Satco S6596 fluorescent bulb operates immediately upon receiving power from a compatible ballast. No special operating procedures are required beyond turning on the light switch connected to the fixture.
- 광 출력: Provides 3800 lumens of light.
- 색온도: Emits a warm white light at 3000 Kelvin.
- 색상 렌더링: Features an 82 CRI, indicating good color accuracy.
유지
- 청소: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
- 대사: Replace the bulb when it reaches the end of its life (average 12,000 hours) or if it begins to flicker or dim significantly. Follow the installation steps for replacement.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전구가 켜지지 않습니다. | No power to the fixture, loose connection, faulty bulb, or faulty ballast. | Check power supply. Ensure bulb is fully seated. Test with a known working bulb. Inspect or replace ballast if necessary. |
| 전구가 깜박입니다. | Loose connection, aging bulb, or failing ballast. | Ensure bulb is securely connected. Replace bulb if it's old. Inspect or replace ballast. |
| Bulb does not fit correctly. | Incompatible fixture or rigid wiring. | Verify fixture compatibility with a 4-pin circline T6 bulb. Ensure the fixture's power connector is flexible enough to accommodate the bulb's flat pin configuration. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 샛코 |
| 모델명 | S6596 |
| 라이트 타입 | 형광등 |
| 왓tage | 55 와트 |
| 전구 모양 크기 | T6 (Circline) |
| 전구베이스 | 4-Pin (Prong) |
| 밝은 색상 | 따뜻한 흰색 |
| 색온도 | 3000 켈빈 |
| 연색지수(CRI) | 82 |
| 명도 | 3800루멘 |
| 평균 수명 | 12,000시간 |
| 권tage | 120 볼트 |
| 제품 치수 | 폭 1.13인치 x 높이 9인치 |
| 재료 | 유리 |
| 특징 | Work with Driver (Ballast) |
| GTIN | 045923065965 |
| ASIN | B0078MXZVO |
보증
This product comes with an average rated hour limited warranty. For specific warranty details and claims, please refer to the manufacturer's official documentation or contact Satco customer support.
지원하다
For further assistance, technical support, or inquiries regarding your Satco S6596 light bulb, please visit the official Satco web사이트 또는 고객 서비스 부서에 문의하십시오.
참고: 가장 정확하고 최신의 지원 정보를 얻으려면 항상 제조업체에서 제공하는 최신 정보를 참조하십시오.