소개
This manual provides essential instructions for the safe and effective use of your Logitech AC Power Adaptor. This adaptor is designed to provide power to various Logitech Harmony and MX series remote controls and accessories. Please read this manual thoroughly before use and retain it for future reference.
Image: Logitech AC Power Adaptor. This image shows the compact design of the power adaptor, featuring its main body and the attached power cord with a 2-pin connector at the end, ready for connection to compatible Logitech devices.
안전 정보
- Use only with specified Logitech devices.
- 물이나 과도한 습기에 노출시키지 마십시오.
- Do not disassemble or attempt to repair the adaptor.
- 전원 콘센트의 볼륨을 확인하세요tage matches the adaptor's specifications (240 Volts).
- 어린이의 손이 닿지 않는 곳에 보관하세요.
설정
- 호환되는 장치를 식별하십시오. Confirm your Logitech device (e.g., Harmony 720, 880, 890, 1000, MX 1000, MX Revolution, diNovo Media Laser, MX 5000, MX 3100, diNovo Edge, Harmony 890 Pro) requires this specific AC power adaptor.
- 장치에 연결: Insert the 2-pin connector of the AC power adaptor firmly into the power input port of your Logitech device or its charging cradle.
- 전원 콘센트에 연결: Plug the AC power adaptor into a standard electrical wall outlet. Ensure the outlet provides 240 Volts as specified for the adaptor.
- 연결 확인: Once connected, your device should begin charging or power on, depending on its design. Refer to your device's specific manual for charging indicators.
작동 지침
The Logitech AC Power Adaptor functions automatically once connected. It provides a stable power supply for charging or operating your compatible Logitech devices. No user interaction is required for its operation beyond proper connection.
- Always ensure the adaptor is securely plugged into both the device and the wall outlet.
- Disconnect the adaptor from the wall outlet when not in use for extended periods.
- Avoid pulling the cable to disconnect; always grasp the plug itself.
유지
- 청소: Disconnect the adaptor from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- 저장: Store the adaptor in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adaptor body to prevent damage.
- 점검: Periodically inspect the cable and connector for any signs of damage, such as fraying, cuts, or bent pins. Discontinue use if damage is observed.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기기가 충전되지 않거나 전원이 켜지지 않습니다. | Adaptor not properly connected. | Ensure the adaptor is firmly plugged into both the device and the wall outlet. |
| 벽면 콘센트가 활성화되지 않았습니다. | Test the wall outlet with another device or try a different outlet. | |
| Adaptor or cable is damaged. | Inspect the adaptor and cable for visible damage. Discontinue use if damaged and replace. | |
| Adaptor feels unusually hot. | 과부하 또는 내부 결함. | Immediately disconnect the adaptor from the power source and device. Do not use if it continues to overheat. |
명세서
- 상표: 로지텍
- 모델 호환성: Logitech Harmony 720, 880, 890, 1000 remotes; MX 1000, MX Revolution, diNovo Media Laser, MX 5000, MX 3100, diNovo Edge, Harmony 890 Pro.
- 입력 Voltage: 240 볼트
- 왓tage: 45 와트
- 전원: 코드식 전기
- 주 전원 커넥터 유형: 2핀
- 품목 무게: 3.2온스(약 0.09킬로그램)
- 패키지 크기: 6.6 x 4 x 2 인치
보증 및 지원
For information regarding warranty coverage and technical support, please refer to the documentation included with your original Logitech device or visit the official Logitech support web사이트 내용과 보증 조건은 지역 및 제품에 따라 다를 수 있습니다.
Logitech 지원: https://support.logi.com/
