로토라이트 RL48-B

Rotolight RL48-B Stealth HD LED Ringlight User Manual

Model: RL48-B

1. 서론

The Rotolight RL48-B Stealth HD LED Ringlight is a versatile and portable continuous light source designed for both HD cinematography, videography, and DSLR photography. It provides naturally warm, shadowless light with studio-accurate color temperatures. This manual provides essential information for the safe and effective use of your RL48-B.

Rotolight RL48-B Stealth HD LED Ringlight front view

그림 1: 전면 view of the Rotolight RL48-B Stealth HD LED Ringlight.

2. 안전 정보

Please read all safety instructions before using the Rotolight RL48-B. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • 장치를 물이나 과도한 습기에 노출시키지 마십시오.
  • 젖은 손으로 기기를 조작하지 마세요.
  • 환기구를 막지 마십시오.
  • Use only specified batteries (3 AA batteries).
  • 제품을 분해하거나 개조하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.
  • LED 조명에 눈이 직접 노출되지 않도록 하십시오.

3. 상자 안에 무엇이 들어있나요?

모든 품목이 포장에 들어 있는지 확인하세요.

  • 1x Rotolight RL48-B HD LED Ring light
  • Lee 205, 3200 CTO, & 218 CTB filters
  • Lee 209 & 298 neutral density filters
  • Lee 216 Diffusion filter
  • 279 1/8 Minus Green filter
Rotolight RL48-B with included filters

Figure 2: Rotolight RL48-B with a selection of included filters.

4. 설정

4.1 배터리 설치

  1. Locate the battery compartment on the rear of the RL48-B unit.
  2. 배터리 덮개를 엽니다.
  3. AA 배터리 3개를 올바른 극성(+/-)에 맞춰 넣으세요.
  4. 배터리 덮개를 단단히 닫으세요.
뒤쪽 view of Rotolight RL48-B showing battery compartment

그림 3: 후면 view of the RL48-B, indicating the battery compartment.

4.2 필터 설치

  1. Select the desired Lee filter from the provided kit.
  2. Insert the filter into the designated filter holder slot on the front of the RL48-B.
  3. Ensure the filter is seated properly and securely.

The RL48-B includes a filter-holder for easy attachment of the supplied Lee Filters. These filters allow for adjustment of color temperature (CTO, CTB) and light intensity (Neutral Density), as well as diffusion.

5. 운영

5.1 전원 켜기/끄기

To power on the Rotolight RL48-B, locate the power button on the side of the unit and press it. Press again to power off.

5.2 Adjusting Light Output (Dimming)

The RL48-B's light output can be accurately dimmed using the supplied Neutral Density (ND) filters. These filters reduce the light intensity over a range of 1.5 aperture stops. Experiment with different ND filters to achieve the desired brightness.

5.3 색온도 조정

The included Lee Filters allow for precise color temperature adjustments:

  • Lee 205, 3200 CTO: Converts daylight (5600K) to Tungsten (3200K) for warmer tones.
  • Lee 218 CTB: Converts Tungsten (3200K) to Daylight (5600K) for cooler tones.
  • Lee 216 Diffusion: Softens the light output.
  • 279 1/8 Minus Green: Corrects for green casts from fluorescent lighting.

Select and insert the appropriate filter based on your desired color temperature and lighting conditions.

5.4 장착 옵션

The RL48-B offers flexible mounting solutions:

  • Shotgun Microphone Mount: The unit mounts natively over a shotgun microphone.
  • 액세서리 신발: Using the optional Rotolight stand (sold separately), it can be mounted via an accessory shoe on a camera.
  • Tripod/Lighting Stand: The optional Rotolight stand also allows mounting onto a standard tripod or lighting stand.
  • Rail Support System: Can be integrated into a rail support system with appropriate adapters.
Rotolight RL48-B mounted on a camera with a shotgun microphone

Figure 4: RL48-B mounted on a camera, demonstrating its compatibility with a shotgun microphone.

Photographer using Rotolight RL48-B on camera

Figure 5: The RL48-B in use by a photographer, providing illumination.

6. 유지관리

6.1 청소

  • 부드럽고 마른 천으로 장치 외부를 닦으세요.
  • 완고한 자국에는 약간 d를 사용하세요.amp 순한 비누를 묻힌 천으로 닦은 후 마른 천으로 물기를 제거하십시오.
  • 연마성 세척제나 용제를 사용하지 마십시오.
  • Clean filters gently with a microfiber cloth to avoid scratches.

6.2 보관

  • Store the RL48-B in a cool, dry place away from direct sunlight.
  • 장기간 사용하지 않을 경우 배터리 누출을 방지하기 위해 배터리를 제거하세요.

7. 문제 해결

문제가능한 원인해결책
조명이 켜지지 않습니다.배터리가 방전되었거나 잘못 삽입되었습니다.배터리를 새 AA 배터리로 교체하고 극성을 확인하십시오.
Light output is too dim.Neutral Density (ND) filter is installed.Remove or replace the ND filter with a lighter one. Ensure batteries are fresh.
Light color appears incorrect.Incorrect color temperature (CTO/CTB) filter installed.Replace the filter with the appropriate CTO or CTB filter for your desired color temperature.
Unit feels warm during operation.정상 작동.This is normal for LED lights. Ensure adequate ventilation and do not cover the unit.

8. 사양

  • 모델: RL48-B
  • LED : 48 color-accurate LEDs
  • 산출: Equivalent to 80W tungsten output
  • 색온도: Adjustable via filters (6300K, 5600K, 4100K, 3200K)
  • 디밍 : Accurate dimming using Neutral Density filters (1.5 aperture stops range)
  • 전원: AA 배터리 3개
  • 배터리 수명: Approximately 4 hours (with specified batteries)
  • 제품 크기: 5.51 x 5.51 x 1.57 인치
  • 품목 무게: 6 온스
  • 제조업체: 로토라이트
  • GTIN: 05060222850253
옆 view of Rotolight RL48-B

그림 6: 사이드 프로file of the RL48-B, highlighting its compact design.

9. 보증 및 지원

Rotolight products are manufactured to high standards and come with a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Rotolight web대지.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Rotolight customer service through their official web사이트 또는 제품 포장에 제공된 연락처 정보를 참조하세요.

Rotolight Official Web대지: www.rotolight.com

관련 문서 - RL48-B

사전view Rotolight NEO 3 및 AEOS 2 빠른 시작 가이드
Rotolight NEO 3 및 AEOS 2 조명 시스템을 설정하고 사용하는 방법에 대한 간략한 가이드로, 기능, 메뉴, 플래시 모드, 특수 효과, 앱 연결 및 문제 해결에 대한 내용을 다룹니다.
사전view Rotolight AEOS 사용 설명서: 작동, 기능 및 사양
Rotolight AEOS LED 조명에 대한 종합적인 사용 설명서입니다. 이 설명서는 기본 및 고급 작동법, 특수 효과(CineSFX, Designer Fade), 고속 싱크(HSS)를 포함한 플래시 모드, 제어 메뉴, 기술 사양, 필터 정보, 장착 방법, 배터리, 보증 및 옵션 액세서리에 대한 자세한 정보를 제공합니다. AEOS 조명 시스템의 성능을 극대화하는 방법을 알아보세요.
사전view Rotolight NEO 3 및 AEOS 2 빠른 시작 가이드
Rotolight NEO 3 및 AEOS 2 LED 조명에 대한 포괄적인 빠른 시작 가이드로, 전문 사진 및 영상 촬영을 위한 기능, 작동 및 설정에 대한 자세한 내용을 설명합니다.
사전view Elinchrom 송신기를 Rotolight에 연결하는 방법: 단계별 가이드
Elinchrom 송신기를 Rotolight NEO 3 및 AEOS 2 조명에 연결하는 방법을 알아보세요. 이 가이드에서는 펌웨어 업데이트, 속도 모드 설정, 수동 플래시, 그리고 원활한 조명 통합을 위한 앱 제어 방법을 다룹니다.
사전view Rotolight Anova PRO 2 사용 설명서: 전문 LED 스튜디오 및 현장 조명
Rotolight Anova PRO 2 사용 설명서를 통해 수상 경력에 빛나는 강력한 LED 스튜디오 및 로케이션 조명에 대한 자세한 정보를 확인하세요. 전문 사진 및 영상 제작을 위한 기능, 작동법, CineSFX™ 효과, HSS 기능, 그리고 기술 사양에 대해 자세히 알아보세요.
사전view Rotolight NEO 3 / AEOS 2 Firmware Release 2.01 - Release Notes
Details the firmware release notes for Rotolight NEO 3 and AEOS 2, version 2.01, highlighting new features like Wi-Fi control, Green-Magenta color correction, enhanced SFX modes, user-selectable fan modes, and Lux Mode. Also covers previous updates from version 1.2.