SatLink WS-6909 DVB-S/DVB-T Combo Satellite Signal Finder Meter User Manual

1. 서론

The SatLink WS-6909 is a versatile digital meter designed for aligning both DVB-S (satellite) and DVB-T (terrestrial) signals. Featuring a 3.5-inch high-definition TFT LCD screen, it allows users to view actual channels directly on the device, ensuring quick and accurate signal alignment. The meter includes a unique calibration system for optimal performance and supports various satellite and terrestrial signal parameters.

메모: DVB-T functionality may not be supported in all regions, including America.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1 x SatLink WS-6909 Satellite Meter
• 1 x 전원 어댑터
• 1 x AV 케이블
• 1 x 자동차 충전기 케이블
• 실리콘 케이스 1개

3. 제품 오버view

Familiarize yourself with the components and ports of your SatLink WS-6909 meter.

그림 3.1: 앞쪽 view of the SatLink WS-6909 meter, showing the 3.5-inch LCD screen, control buttons, and numeric keypad, alongside its protective orange silicone case.

그림 3.2: 맨 아래 view of the device, featuring the main power switch, DC power input port, and a USB port for software upgrades.

그림 3.3: 옆 view of the meter, illustrating the AV IN and AV OUT ports for connecting external video sources or displays.

그림 3.4: 맨 위 view of the device, displaying the F-connector for satellite input and the standard antenna input for terrestrial signals.

4. 설정

4.1 장치 충전

1. Connect the provided Power Adaptor to the DC input port on the bottom of the meter.
2. Plug the Power Adaptor into a standard electrical outlet. The 'Charge' indicator light on the device will illuminate.
3. Allow the device to charge fully before initial use. A full charge provides approximately 4 hours of operating time.
4. Alternatively, use the Car Charger Cable to charge the device in a vehicle.

4.2 초기 전원 켜기

1. 기기가 충분히 충전되었는지 확인하십시오.
2. Flip the main power switch located on the bottom of the meter to the 'ON' position.
3. The device will power on and perform an automatic calibration for optimal performance.

4.3 Connecting Antennas/LNBs

• For satellite signal reception (DVB-S), connect the LNB cable from your satellite dish to the F-connector input on the top of the meter.
• For terrestrial signal reception (DVB-T), connect your terrestrial antenna cable to the standard antenna input on the top of the meter.

5. 사용 설명서

5.1 기본 탐색

• 사용하세요 메뉴 버튼을 눌러 메인 메뉴에 액세스합니다.
• Navigate through menu options using the directional arrow buttons (위/아래/왼쪽/오른쪽).
• 를 누르세요 OK 선택 사항을 확인하거나 하위 메뉴로 들어가려면 버튼을 누르십시오.
• 사용하세요 EXIT 이전 화면으로 돌아가거나 메뉴를 종료하려면 버튼을 클릭하세요.
• The numeric keypad can be used for direct input of values such as frequencies or channel numbers.

5.2 DVB-S (Satellite) Signal Finding

1. From the main menu, select the DVB-S measurement mode.
2. Configure parameters such as satellite, transponder frequency, symbol rate, and polarity. These settings can be modified by the user.
3. The meter supports DISEQC 1.0, 1.1, 1.2, and 22kHz Tone. Adjust these settings as required for your LNB configuration.
4. The meter provides LNB power supply options of 18V/13V (maximum 400mA).
5. Align your satellite dish while observing the signal strength, quality, BER (Bit Error Rate), S/N (Signal-to-Noise ratio), and PWR (Power) on the 3.5-inch LCD screen.
6. The device will provide a sound and light alarm when a signal is locked.
7. The meter can automatically calculate Azimuth (AZ) and Elevation (EL) angles to assist with dish alignment.
8. Search modes include Auto, Blind, and Manual.

5.3 DVB-T (Terrestrial) Signal Finding

1. From the main menu, select the DVB-T measurement mode.
2. Configure the desired frequency range.
3. The meter supports ANT power supply options of 5V/12V/24V for active antennas.
4. Align your terrestrial antenna while observing the signal strength, quality, MER (Modulation Error Ratio), S/N (Signal-to-Noise ratio), and PWR (Power) on the LCD screen.
5. The meter supports multichannel checks and demodulation types including QPSK, 16QAM, and 64QAM.
6. Search modes include Auto and Manual.

5.4 소프트웨어 업그레이드

The USB port on the bottom of the device is used for software upgrades. Refer to the manufacturer's web최신 소프트웨어 및 사용 설명서를 제공하는 사이트입니다.

6. 유지관리

6.1 청소

• 기기 외부를 부드럽고 마른 천으로 닦아주세요.
• 액체 세척제나 용제를 사용하지 마십시오. 기기가 손상될 수 있습니다.

6.2 배터리 관리

• 배터리 수명을 연장하려면 기기를 극한 온도에 노출시키지 마세요.
• Recharge the battery regularly, even if the device is not in frequent use.

6.3 소프트웨어 업데이트

정기적으로 제조업체의 공식을 확인하십시오. website for available software updates. Updating the firmware can improve performance and add new features.

7. 문제 해결

8. 사양

• 표시하다: 3.5 인치 고화질 TFT LCD 화면
• 배터리: 8.4V/3000mAh Li-ion, Max Operating Time: 4 hours
• DVB-S Input Frequency: 950-2150MHz
• DVB-S Input Level: -65 ~ -25dBm
• DVB-S Input Impedance: 75Ω
• DISEQC Support: 1.0, 1.1, 1.2 and 22kHz Tone
• LNB Power Supply: 18V/13V (IMax 400mA)
• DVB-T Frequency Range: 46MHz-862MHz
• DVB-T Level Range: 40dBµV-110dBµV
• DVB-T Input Impedance: 75Ω
• DVB-T Demodulation: QPSK, 16QAM, 64QAM
• ANT Power Supply: 5V/12V/24V
• 측정 유형: Signal strength, quality, BER, S/N, PWR (DVB-S); Signal strength, quality, MER, S/N, PWR (DVB-T)
• 검색 모드: Auto, Blind, Manual
• 제품 크기: 3.54 x 1.77 x 6.46 인치
• 품목 무게: 1.76파운드
• 모델 번호: WS6909

9. 보증 및 지원

For technical assistance, warranty information, or customer support, please contact your original retailer or refer to the manufacturer's official website for contact details. Please have your product model number (WS 6909) and purchase information ready when seeking support.