소개
This manual provides detailed instructions for the installation, configuration, and operation of the EnGenius EAP350 N300 High-Power Wireless Gigabit Indoor Access Point. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.
1. 제품 오버view
The EnGenius EAP350 is a high-power wireless N access point designed for robust indoor wireless connectivity. It supports multiple operating modes including Access Point, WDS, and Repeater, offering flexibility for various network deployments. With its Gigabit Ethernet port and 802.11n standard, it delivers high-speed wireless performance.
주요 특징:
- High-power, Long-range Wi-Fi for extended coverage.
- Up to 29dBm RF Tx power for enhanced signal strength.
- Wireless N (802.11n) standard delivers up to 300Mbps throughput.
- Gigabit Ethernet LAN interface for fast wired data transfer.
- Supports 802.1q mapping of SSIDs and up to four VLANs.
- Power-over-Ethernet (IEEE 802.3af) support for flexible deployment.
- Internal 5dBi antenna with optimized configuration.
신체적 외모:
Figure 1: EnGenius EAP350 N300 Access Point. This image displays the top-down view of the white, circular access point with the EnGenius logo and model number EAP350 visible. LED indicators for wireless, LAN, and power are also present.
2. 패키지 내용
패키지에 다음 품목이 포함되어 있는지 확인하십시오.
- EnGenius EAP350 High-power Wireless N Access Point
- 전원 어댑터 (PoE를 사용하지 않는 경우)
- 이더넷 케이블
- 장착 키트(나사, 앵커)
- 빠른 설치 가이드
3. 설정 및 설치
3.1 장치 장착
The EAP350 can be mounted on a ceiling or wall. Choose a central location for optimal wireless coverage. Use the provided mounting kit to secure the device.
- 적절한 장착 위치를 선택하십시오.
- 장착 브래킷을 템플릿으로 사용하여 드릴 구멍을 표시합니다.
- 필요한 경우 구멍을 뚫고 벽 고정 장치를 삽입합니다.
- 장착 브래킷을 표면에 고정하십시오.
- Attach the EAP350 to the mounting bracket by twisting it into place.
3.2 장치 전원 공급
The EAP350 supports Power-over-Ethernet (PoE) IEEE 802.3af or can be powered by a standard power adapter.
- PoE 연결: Connect an Ethernet cable from a PoE-enabled switch or a PoE injector (e.g., EnGenius EPE5818Gaf) to the LAN port of the EAP350.
- 전원 어댑터 연결: If PoE is not available, connect the provided power adapter to the power input port on the EAP350 and plug it into a power outlet.
3.3 초기 네트워크 연결
Connect the EAP350 to your network using an Ethernet cable from its LAN port to your router or switch. Ensure the device powers on and the LED indicators illuminate correctly.
4. 작동 모드
The EAP350 can operate in several modes to suit different network requirements:
- 액세스 포인트(AP) 모드: The default mode, where the device acts as a central hub for wireless clients to connect to your wired network.
- WDS(무선 분배 시스템) 모드: Allows the EAP350 to wirelessly connect to other access points to extend the network without physical cabling. Can be configured as WDS AP, WDS Bridge, or WDS Station.
- 리피터 모드: Extends the range of an existing wireless network by re-transmitting the signal from another access point.
5. 구성
5.1 액세스 Web 인터페이스
To configure the EAP350, access its web기반 관리 인터페이스:
- Ensure your computer is connected to the same network as the EAP350.
- 열기 web browser and enter the default IP address (refer to the Quick Installation Guide or device label for the default IP, typically 192.168.1.1 or similar).
- 기본 사용자 이름과 비밀번호를 입력하세요(예: admin/admin).
5.2 기본 무선 설정
Navigate to the Wireless settings section to configure your Wi-Fi network:
- SSID : Set your desired network name.
- 보안 모드: Select WPA2-PSK (AES) for optimal security.
- 사전 공유 키: Enter a strong password for your wireless network.
- 작동 모드: Select the desired mode (Access Point, WDS, Repeater).
절대 고급 설정
The EAP350 offers advanced features such as VLAN tagging and Quality of Service (QoS) for network management. Refer to the full user manual for detailed instructions on these configurations.
5.4 구성 저장
After making any changes, ensure you save the configuration to the device's memory. Typically, there is a "Save" or "Apply" button within the web interface. Some devices may require a separate step to save the running configuration to the startup configuration.
6. 유지관리
6.1 펌웨어 업데이트
EnGenius를 정기적으로 확인하세요 website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.
6.2 공장 기본값으로 재설정
If you encounter persistent issues or forget your login credentials, you can reset the device to its factory default settings. Locate the reset button (often a small pinhole) on the device. With the device powered on, press and hold the reset button for approximately 10-15 seconds until the LEDs indicate a reset.
6.3 청소
Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners or aerosols, as they may damage the device.
7. 문제 해결
This section addresses common issues you might encounter with your EAP350.
- 전원 없음:
- Ensure the power adapter is securely connected to both the device and a working power outlet, or that the PoE source is active and connected to the LAN port.
- Check the power LED indicator.
- Wi-Fi에 연결할 수 없습니다:
- SSID와 비밀번호가 올바른지 확인하세요.
- Check if the wireless function is enabled in the web 인터페이스.
- Ensure your client device is within range.
- 느린 무선 속도:
- 다른 무선 장치 또는 네트워크로 인한 간섭이 있는지 확인하십시오.
- Ensure the EAP350 is placed in an optimal location, away from obstructions.
- Verify the wired connection speed to your router/switch.
- 펌웨어를 최신 버전으로 업데이트하세요.
- 접근할 수 없습니다 Web 인터페이스:
- Ensure your computer's IP address is in the same subnet as the EAP350.
- 브라우저 캐시를 지우거나 다른 브라우저를 사용해 보세요.
- If the IP address has been changed and forgotten, a factory reset may be necessary.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | EAP350 |
| 무선 표준 | 802.11b/g/n |
| 주파수 대역 | 단일 대역(2.4GHz) |
| 최대 무선 속도 | 300Mbps |
| 이더넷 포트 | 1개의 기가비트 이더넷(RJ-45) |
| PoE 지원 | IEEE 802.3af |
| 안테나 | Internal 5dBi |
| 숫양 | 32메가바이트 |
| 플래시 메모리 | 4메가바이트 |
| 치수(길이x너비x높이) | 4.73 x 4.73 x 1.97 인치 |
| 품목 무게 | 9.9 온스 |
| 운영 체제 | EnGenius EnStation Cloud (Management) |
| 권tage | 12 Volts (via power adapter) |
9. 보증 정보
EnGenius products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EnGenius web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
10. 기술 지원
If you require further assistance or encounter issues not covered in this manual, please contact EnGenius Technical Support. You can find contact information and additional resources, including FAQs and driver downloads, on the official EnGenius web대지:
Web대지: www.engeniustech.com/support
Please have your product model number (EAP350) and serial number ready when contacting support.
