Supersonic SC-2212 22-Inch 1080p LED HDTV with Built-in DVD Player Instruction Manual

소개

This manual provides essential information for the proper setup, operation, and maintenance of your Supersonic SC-2212 22-Inch 1080p LED HDTV with Built-in DVD Player. Please read these instructions thoroughly before using the product and retain them for future reference.

설정

1. 포장 해제 및 스탠드 설치

Carefully remove the TV and all accessories from the packaging. Place the TV face down on a soft, clean surface to prevent screen damage. Attach the included stands to the bottom of the TV using the provided screws. Ensure they are securely fastened.

Image: Supersonic SC-2212 TV and included accessories.

2. 전원 연결

Connect the AC/DC power adapter to the DC 12V input port on the TV. Plug the other end of the adapter into a suitable power outlet. The TV supports both AC (home) and DC (vehicle/RV) power sources.

3. Antenna Connection and Channel Scan

For over-the-air broadcasts, connect a digital antenna (not included) to the RF IN port on the back of the TV. Position the antenna for optimal signal reception, ideally near a window. Once connected, power on the TV and navigate to the 'Channel' menu to perform an 'Auto Scan' for available channels.

4. 외부기기 연결하기

이 TV는 다양한 연결 옵션을 제공합니다.

• HDMI : Connect devices like cable boxes, gaming consoles, or streaming sticks to the HDMI input ports.
• USB: 미디어 재생을 위해 USB 드라이브를 USB 포트에 삽입하세요.
• 유명인 : 컴포지트 비디오 및 스테레오 오디오 출력을 지원하는 구형 기기는 AV 입력 단자를 사용하십시오.
• PC Monitor: The TV can function as a PC monitor.

작동 지침

1. 기본 제어

The TV can be controlled using the included full-function remote control or the buttons located on the TV itself. The remote provides direct access to various functions, including power, volume, channel selection, input source, and menu navigation.

이미지: 앞면 view of the TV with the remote control.

2. 입력 소스 선택

Press the 'SOURCE' button on the remote or TV to cycle through available input sources (ATSC, AV, HDMI, VGA, USB). Select the desired input for your connected device.

3. Picture and Sound Modes

사용자 정의 view다양한 화면 및 음향 모드에 대한 경험:

• 사진 모드: User, Standard, Dynamic, Mild. Adjust brightness, contrast, and color saturation to your preference.
• 사운드 모드: User, Music, Movie, Standard. Fine-tune bass, treble, and balance for optimal audio.

4. 내장 DVD 플레이어 작동 방법

The integrated DVD player supports multiple formats including DVD+/-R, DVD+/-RW, VCD, HDCD, and CD. Insert a disc into the side slot with the label facing you. The TV will automatically switch to DVD mode or you can select it from the source menu. Use the remote control for playback functions (play, pause, stop, skip).

Image: Close-up of the TV showing the built-in DVD player slot.

5. Media Playback (USB/SD/MMC/MS)

Insert a USB drive or a compatible memory card (SD/MMC/MS) into the respective slots. Select 'USB' from the input source menu. You can then browse and play photos, music, or videos stored on your media device.

6. 추가 기능

• 수면 타이머 : 텔레비전이 자동으로 꺼지도록 타이머를 설정하세요.
• 다국어 OSD: On-Screen Display supports multiple languages for menu navigation.
• 디지털 노이즈 감소: Enhances picture clarity by reducing visual noise.

유지

1. 화면 청소

부드럽고 보풀이 없는 천으로 화면을 부드럽게 닦으세요. 잘 지워지지 않는 얼룩은 가볍게 닦아주세요.amp천에 물이나 특수 화면 세척제를 묻혀 닦아주세요. 강한 화학 물질이나 연마재는 사용하지 마세요.

2. 캐비닛 청소

Use a soft, dry cloth to clean the TV cabinet. Do not use liquid or aerosol cleaners directly on the cabinet as they may damage the finish.

3. 보관

If storing the TV for an extended period, disconnect it from the power source and store it in a cool, dry place, preferably in its original packaging to protect it from dust and physical damage.

문제 해결

TV에 문제가 발생하면 지원팀에 문의하기 전에 다음의 일반적인 해결 방법을 참조하세요.

• 전원 없음: Ensure the power adapter is securely connected to both the TV and the power outlet. Check if the power outlet is functional.
• 화면/소리 없음: Verify that the correct input source is selected. Check all cable connections (HDMI, AV, antenna) for looseness or damage.
• 화질이 좋지 않음: Adjust picture settings (brightness, contrast, color) in the menu. For antenna reception, try repositioning the antenna or performing another channel scan.
• No Signal (Antenna): Ensure the antenna is properly connected and positioned. Perform an auto channel scan.
• DVD Player Not Reading Disc: Ensure the disc is clean and free of scratches. Insert the disc correctly with the label side facing you.
• 원격 제어가 작동하지 않음: Check and replace the batteries (2 AAA batteries required). Ensure there are no obstructions between the remote and the TV's IR sensor.

명세서

보증 및 지원

For warranty information and technical support, please refer to the documentation included with your product or visit the official Supersonic web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.