1. 제품 오버view
The Taymor Prisma Series 18-inch Towel Bar, model 02-D9218W, is designed to provide a functional and stylish solution for hanging towels in your bathroom. This towel bar features a crisp white powder-coated finish and a traditional design, complementing various bathroom decors. Constructed from durable Zamac (diecast zinc alloy), it ensures longevity and reliable performance. The unit measures 19 7/8 inches wide with a 3 1/8-inch extension from the mounting surface.
주요 특징:
- 치수: 19-7/8 inches wide x 3-1/8 inches extension from the wall.
- 마치다: Crisp white powder-coated finish for a clean, subtle look.
- 설치: Concealed surface mount for a seamless appearance.
- 설계: Traditional style that coordinates with the entire Prisma series.
- 재료: Constructed from durable Zamac (diecast zinc alloy).
2. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Taymor Prisma Series 18-Inch Towel Bar (1 unit)
- 장착 하드웨어(나사, 앵커 등)
3. 안전 정보
Read all instructions carefully before installation. Failure to follow these instructions may result in injury or damage to the product or mounting surface.
- 설치 작업 중에는 항상 보안경과 같은 적절한 안전 장비를 착용하십시오.
- Ensure the mounting surface is structurally sound and can support the weight of the towel bar and any items placed on it.
- Use the correct tools for drilling and fastening to prevent damage.
- 작은 부품과 하드웨어는 어린이의 손이 닿지 않는 곳에 보관하십시오.
- Do not overtighten screws, as this may strip threads or damage the product.
4. 설정 및 설치
Follow these steps for proper installation of your Taymor Prisma Series Towel Bar.
필요한 도구 (포함되지 않음):
- 연필
- 줄자
- 송곳
- 드릴 비트 (벽면 앵커에 적합)
- 드라이버(십자 드라이버 권장)
- 수준
설치 단계:
- 장착 위치 결정: Choose a suitable location on your wall for the towel bar. Ensure there are no electrical wires or plumbing pipes behind the drilling area.
- 드릴링 지점 표시: The drilled holes for this towel bar are 17 7/8 inches center to center. Use a measuring tape and a level to mark two points on the wall that are 17 7/8 inches apart horizontally and at the desired height.
- 드릴 파일럿 홀: Using a drill bit appropriate for your wall type and the provided wall anchors, drill pilot holes at the marked points.
- 벽 앵커 삽입: 벽 앵커가 벽면과 평평해질 때까지 미리 뚫어 놓은 구멍에 살살 두드려 넣어주세요.
- 장착 브래킷 부착: Secure the mounting brackets (if separate from the towel bar base) to the wall using the provided screws, fastening them into the wall anchors.
- 수건걸이 설치: Align the towel bar with the attached mounting brackets. Secure the towel bar to the brackets using the remaining screws, ensuring a snug and stable fit. The mounting is concealed for a clean look.
- 안정성 확인: Gently tug on the installed towel bar to ensure it is securely fastened to the wall.
Image: The Taymor Prisma Series 18-Inch Towel Bar, model 02-D9218W, shown in its white finish. This image illustrates the product's design and appearance when installed.
5. 사용
The Taymor Prisma Series Towel Bar is designed for hanging towels and other lightweight bathroom textiles. Ensure that the total weight placed on the towel bar does not exceed its structural capacity to prevent damage or detachment from the wall.
6. 유지관리
To maintain the appearance and longevity of your Taymor Prisma Series Towel Bar, follow these simple cleaning guidelines:
- 청소: Wipe the towel bar regularly with a soft, damp 옷감.
- 강한 세척제는 피하세요: Do not use abrasive cleaners, scouring pads, or chemical solvents, as these can damage the white powder-coated finish.
- 건조: 물 얼룩이 생기지 않도록 청소 후 즉시 표면을 말리십시오.
7. 문제 해결
수건걸이에 문제가 발생하면 다음의 일반적인 해결 방법을 참조하십시오.
- 수건걸이가 헐거운 것 같아요: If the towel bar becomes loose over time, gently tighten the mounting screws. Do not overtighten. If the wall anchors are damaged, they may need to be replaced or the towel bar repositioned.
- 긁힘 또는 도장 손상: Minor scratches may be touched up with a compatible white enamel paint. For significant damage, consider contacting Taymor customer support for advice.
8. 사양
| 모델 번호 | 02-D9218W |
| 색상 | 하얀색 |
| 재료 | Zamac (Diecast Zinc Alloy) |
| 마무리 유형 | 분말 코팅 마감 |
| 제품 크기(L x W x H) | 19.88인치 x 3.13인치 x 0.38인치 |
| 품목 무게 | 12 온스 |
| Drilled Holes (Center to Center) | 17 7/8 인치 |
| 제조업체 | 노스 코스트 조명 |
| 한국어: | 063013034370 |
9. 보증 정보
Taymor Industries warrants goods against defects in manufacture for one year from the date of purchase. This warranty does not cover user-caused damage or damage incurred during installation. The warranty is void if the goods have been subjected to misapplication or abuse.
10. 고객 지원
For further assistance, technical support, or warranty claims, please contact Taymor Industries directly. Refer to the official Taymor web최신 연락처 정보는 해당 사이트나 제품 포장에서 확인하세요.
