SECO-LARM SK-2323-SDQ Mullion Mount Keypad User Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the SECO-LARM SK-2323-SDQ Mullion Mount Keypad. This device is designed for secure access control, offering robust features for various applications.

The SK-2323-SDQ is a versatile access control keypad supporting up to 1,010 users across two independent relay outputs. It features a durable, weatherproof design suitable for outdoor use and includes advanced security measures such as an optical tamp센서예요.

그림 1: SECO-LARM SK-2323-SDQ Mullion Mount Keypad. This image displays the front view of the keypad, highlighting its compact design and backlit keys.

2. 특징

The SECO-LARM SK-2323-SDQ Mullion Mount Keypad includes the following key features:

• 사용자 용량: Supports 1,010 users (Output #1: 1,000 users, Output #2: 10 users).
• 릴레이 출력: Two Form C relay outputs for flexible control.
• Programmable Output Time: Each relay has a programmable output time from 1 to 99 seconds, or can be set to toggle mode.
• 초인종 기능 : Output #2 can be programmed for use with a doorbell.
• 입력: Includes two egress inputs and one door sensor input.
• 백라이트 키: Ensures easy visibility and operation in low-light conditions.
• 상태 LED: Two multi-colored status LEDs provide operational feedback.
• 직접 프로그래밍: 모든 기능은 키패드에서 직접 프로그래밍할 수 있으므로 외부 프로그래머가 필요하지 않습니다.
• 데이터 보존: EEPROM protects programmed information in case of power loss.
• Tamp보안: Features an optical tamper sensor for enhanced security.
• 환경 보호: Circuitry is potted with epoxy for outdoor use, ensuring durability.
• 비바람에 견디는 등급 : IP65 등급으로 먼지와 물로부터 보호됩니다.
• 건설: Rugged aluminum construction for long-lasting performance.

3. 설정

Proper setup is crucial for the optimal performance and security of the SK-2323-SDQ keypad. Always ensure power is disconnected before beginning installation.

3.1 장착

• Select a suitable mounting location, typically near the entry point, ensuring it is within reach and visible.
• Use the provided mounting template (if applicable) to mark drilling points for the keypad and its backplate.
• Drill pilot holes and secure the backplate to the wall using appropriate screws and anchors.
• Route necessary wiring through the wall opening to the keypad's connection points.
• Attach the keypad securely to the backplate.

3.2 배선

Refer to the wiring diagram provided with your product packaging for specific connections. General wiring considerations include:

• Connect power supply wires (typically 12-24V AC/DC) to the designated power input terminals.
• Connect the two Form C relay outputs to the controlled devices (e.g., electric strike, magnetic lock, automatic door opener).
• Connect egress devices (e.g., exit buttons) to the egress inputs.
• Connect a door sensor (e.g., magnetic contact) to the door sensor input.
• 모든 연결 부분이 안전하고 절연되어 있는지 확인하여 단락을 방지하세요.

After wiring, apply power and observe the status LEDs for initial power-on indications.

4. 운영

The SK-2323-SDQ keypad is operated by entering user codes or programming new settings directly through the keypad interface.

4.1 초기 프로그래밍

Upon first power-up, the keypad will typically be in a default programming mode or require a master code to be set. Consult the full programming guide for detailed steps on setting the master code and initial system parameters.

4.2 사용자 추가/삭제

To add a new user, enter the master code followed by the programming sequence for adding users, then input the desired user code. To delete a user, follow the corresponding programming sequence and enter the user code to be removed.

4.3 Accessing Controlled Devices

Users can gain access by entering their valid user code on the keypad. Upon successful code entry, the corresponding relay output will activate for the programmed duration, unlocking the door or activating the connected device.

4.4 초인종 기능

If Output #2 is programmed for doorbell functionality, pressing a specific key or sequence on the keypad will activate a connected doorbell chime.

5. 유지관리

The SECO-LARM SK-2323-SDQ is designed for durability and requires minimal maintenance. Regular checks can help ensure long-term reliability.

• 청소: 키패드 표면을 부드러운 천으로 닦으세요.amp 천을 사용하십시오. 마감재나 키패드 버튼을 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.
• 점검: Periodically inspect the keypad for any signs of physical damage, loose connections, or wear.
• 기능성 테스트: Regularly test user codes and egress buttons to ensure all functions are operating correctly.
• 전원 공급 장치: 전원 공급이 안정적이며 지정된 볼륨 내에 있는지 확인하십시오.tag전자 범위.

6. 문제 해결

If you encounter issues with your SK-2323-SDQ keypad, refer to the following common troubleshooting steps:

• 키패드가 응답하지 않음: Check the power supply connection. Ensure the keypad is receiving adequate power.
• 작동하지 않는 코드: Verify that the user codes are correctly programmed. Ensure the master code is correct if attempting programming. Check for any tamper alarms that might disable the keypad.
• 문이 열리지 않음: Check the wiring to the electric strike or lock. Ensure the relay output is activating (listen for a click or observe status LEDs). Verify the lock mechanism is not jammed.
• LED가 켜지지 않음: Check power supply. If only specific LEDs are off, consult the full manual for diagnostic codes.
• Tamp어 알람: 만약 t라면amper alarm is active, ensure the keypad is securely mounted and the optical tamper sensor is not obstructed or triggered.

For persistent issues, consult the complete product manual or contact technical support.

7. 사양

Key technical specifications for the SECO-LARM SK-2323-SDQ Mullion Mount Keypad:

8. 보증

This SECO-LARM product is covered by the manufacturer's limited warranty. Please refer to the warranty card included with your product or visit the official Seco-Larm web보증 범위, 기간 및 청구 절차에 대한 자세한 약관은 해당 사이트를 참조하십시오. 보증 확인을 위해 구매 증빙 자료를 보관하십시오.

9. 지원

For technical assistance, product inquiries, or further support, please contact Seco-Larm customer service. You can typically find contact information, including phone numbers and email addresses, on the official Seco-Larm website or in the product packaging. When contacting support, please have your product model number (SK-2323-SDQ) and a description of your issue ready.